Experimental Study on Force of Electric Heating Drilling to Hard-to-Cut Materials

REFERENCES

• Kitagawa, T.; Maekawa, K. Plasma arc aided machining for difficult-to-cut materials. Bulletin of the Japan Society of Precision Engineering 1984, 18 (4), 86–92.
   Google Scholar
• Ployakov, S.P. Heating optimization of a metal under plasma mechanical treatment (in Russian). Inzhenerno-Fizicheskii Zhurnal 1984, 47 (1), 132–138.
   Google Scholar
• Zhu, A.; Naumov, Y.; Villeneuve, D.M.; Corkum, P.B. Influence of laser parameters and material properties on micro drilling with femtosecond laser pulses. Applied Physics A 1999, 12 (1), 367–371.
   Web of Science ®Google Scholar
• Uehara, K.; Takeshita, H. Cutting ceramics with a technique of hot machining. Annals of the CIRP 1986, 35 (1), 198–206.
   Google Scholar
• Kuar, A.S.; Cherjee, B.A.; Ganguly, D.; Mitra, S. Optimization of Nd:YAG laser parameters for microdrilling of alumina with multiquality characteristics via grey–Taguchi method. Materials and Manufacturing Processes 2012, 27 (3), 329–336.
   Web of Science ®Google Scholar
• Coteaţă, M.; Schulze, H.-P.; Slătineanu, L. Drilling of difficult-to-cut steel by electrochemical discharge machining. Materials and Manufacturing Processes 2011, 26 (12), 1466–1472.
   Web of Science ®Google Scholar
• Strenkowski, J.S.; Hsieh, C.C.; Shih, A.J. An analytical finite element technique for predicting thrust force and torque in drilling. International Journal of Machine Tools and Manufacture 2004, 45, 1413–1421.
   Web of Science ®Google Scholar
• Caydas, U.; Hascalık, A.; Buytoz, O.; Meyveci, A. Performance evaluation of different twist drills in dry drilling of AISI 304. Austenitic Stainless Steel Materials and Manufacturing Processes 2011, 26 (8), 951–960.
   Web of Science ®Google Scholar
• Rajmohan, T.; Palanikumar, K. Experimental investigation and analysis of thrust force in drilling hybrid metal matrix composites by coated carbide drills. Materials and Manufacturing Processes 2011, 26 (8), 961–968.
   Web of Science ®Google Scholar
• Rajmohan, T.; Palanikumar, K. Optimization of machining parameters for surface roughness and burr height in drilling hybrid composites. Materials and Manufacturing Processes 2012, 27 (3), 320–328.
   Web of Science ®Google Scholar
• Latha, B.; Senthilkumar, V.S. Analysis of thrust force in drilling glass fiber-reinforced plastic composites using fuzzy logic. Materials and Manufacturing Processes 2009, 24 (4), 509–516.
   Web of Science ®Google Scholar
• Tang, H.Q.; Wen, J.; Wang, C.Y. Simulation of drilling on the copper of PCB with ultra-high-speed. Advanced Materials Research 2011, 188, 739–742.
   Google Scholar
• Huang, L.X.; Wang, C.Y.; Chen, M.; Zheng, X.H. Simulations and experiments on drilling PCB based on thermo-mechanical coupling. In Proceedings of the Advances in Manufacturing Technology XXIV, ICMR, California, October 2010.
   Google Scholar
• Palanikumar, K.; Latha, B.; Senthilkumar, V.S.; Davim, J.P. Analysis on drilling of glass fiber-reinforced polymer (GFRP) composites using grey relational analysis. Materials and Manufacturing Processes 2012, 27 (3), 297–305.
   Web of Science ®Google Scholar
• Kumar, S.; Chauhan, S.R.; Rakesh, P.K.; Singh, I.; Davim, J.P. Drilling of glass fiber/vinyl ester composites with fillers. Materials and Manufacturing Processes 2012, 27 (3), 314–319.
   Web of Science ®Google Scholar
• Ozler, L.; Dogru, N. An experimental investigation of hole geometry in friction drilling. Materials and Manufacturing Processes 2013, 28 (4), 470–475.
   Web of Science ®Google Scholar
• Wang, W.; Zhu, D.; Qu, N.; Huang, S.; Fang, X. Electrochemical drilling inclined holes using wedged electrodes. The International Journal of Advanced Manufacturing Technology 2010, 47 (9–12), 1129–1136.
   Web of Science ®Google Scholar
• Kuram, E.; Ozcelik, B.; Demirbas, E.; Şik, E.; Tansel, I.N. Evaluation of new vegetable-based cutting fluids on thrust force and surface roughness in drilling of AISI 304 using Taguchi method. Materials and Manufacturing Processes 2011, 26 (9), 1136–1146.
   Web of Science ®Google Scholar
• Zhang, J.Z.; Chen, J.C. Surface roughness optimization in a drilling operation using the Taguchi design method. Materials and Manufacturing Processes 2009, 24 (4), 459–467.
   Web of Science ®Google Scholar
• Lan-ying, X.; Qiang, W.; Bang-yan, Y. Simulation and experiment of minipore drilling for austenitic stainless steel. Journal of South China University of Technology: Natural Science Edition 2012, 39 (1), 95–98.
   Google Scholar
• Lan-ying, X.; Qiang, W.; Xiao-fang, H.; Bang-yan, Y. Electrical properties analysis and control in electric hot drilling. In The International Conference on Electrical and Control Engineering, Wuhan, June 26–28, 2010.
   Google Scholar
• Ye, B.Y.; Liu, J.P.; Xu, L.Y.; Peng, R.T.; Zhao, X.Z. Heating current control in electric hot machining based on conservation law of optimum cutting temperature. Key Engineering Materials 2011, 392–394, 294–298.
   Google Scholar