316
Views
8
CrossRef citations to date
0
Altmetric
Original Articles

Strengthening Mechanisms in Multiwalled Carbon Nanotubes Reinforced Co–W Pulse Electrodeposited Coatings

&
Pages 48-52 | Received 27 Aug 2014, Accepted 09 Dec 2014, Published online: 26 May 2015

REFERENCES

  • Zoikis-Karathanasis, A.; Pavlatou, E.; Spyrellis, N. Pulse electrodeposition of Ni–P matrix composite coatings reinforced by SiC particles. Journal of Alloys and Compounds 2010, 494 (1–2), 396–403.
  • Yang, Y.; Chen, J.; Lu, D.; Liu, K.; Zou, J.; Ungár, T.; Wang, Y. Texture evolution in an electrodeposited nanocrystalline Ni–Fe alloy during growth-plane rolling and cross-section rolling. Scripta Materialia 2012, 67 (5), 483–486.
  • Liu, H.; Guo, R.X.; Viejo, F.; Liu, Z. Comparison of microstructure and residual stress characteristics of electroless Ni–W–P coatings annealed with a laser and a furnace. Surface and Coatings Technology 2012, 206 (8–9), 2380–2387.
  • Bera, P.; Seenivasan, H.; Rajam, K.; William Grips, V. Characterization of amorphous Co–P alloy coatings electrodeposited with pulse current using gluconate bath. Applied Surface Science 2012, 258 (24), 9544–9553.
  • Sriraman, K.R.; Ganesh Sundara Raman, S.; Seshadri, S.K. Synthesis and evaluation of hardness and sliding wear resistance of electrodeposited nanocrystalline Ni–W alloys. Materials Science and Engineering A 2006, 418 (1–2), 303–311.
  • Zeng, Z.; Zhang, J. Anti-wear properties of Cr–C and Ni–Co alloy coatings as substitutes for conventional nanocrystalline Cr coatings. Journal of Applied Physics 2008, 41 (18), 185303.
  • Tian, L.; Xu, J.; Qiang, C. The electrodeposition behaviors and magnetic properties of Ni–Co films. Applied Surface Science 2011, 257 (10), 4689–4694.
  • Lajevardi, S.; Shahrabi, T. Effects of pulse electrodeposition parameters on the properties of Ni–TiO2 nanocomposite coatings. Applied Surface Science 2010, 256 (22), 6775–6781.
  • Ghaferi, Z.; Raeissi, K.; Golozar, M.A.; Edris, H. Characterization of nanocrystalline Co–W coatings on Cu substrate, electrodeposited from a citrate-ammonia bath. Surface and Coatings Technology 2011, 206 (2–3), 497–505.
  • Vazquez-Arenas, J.; Pritzker, M. Effect of electrolyte and agitation on the anomalous behavior and morphology of electrodeposited Co–Ni alloys. Journal of Solid State Electrochemistry 2013, 17 (2), 419–433.
  • Haseeb, A.S.M.A.; Albers, U.; Bade, K. Friction and wear characteristics of electrodeposited nanocrystalline nickel–tungsten alloy films. Wear 2008, 264 (1–2), 106–112.
  • Weston, D.P.; Shipway, P.H.; Harris, S.J.; Cheng, M.K. Friction and sliding wear behaviour of electrodeposited cobalt and cobalt–tungsten alloy coatings for replacement of electrodeposited chromium. Wear 2009, 267 (5–8), 934–943.
  • Mulukutla, M.; Kommineni, V.K.; Harimkar, S.P. Pulsed electrodeposition of Co–W amorphous and crystalline coatings. Applied Surface Science 2012, 258 (7), 2886–2893.
  • Weston, D.P.; Harris, S.J.; Shipway, P.H.; Weston, N.J.; Yap, G.N. Establishing relationships between bath chemistry, electrodeposition and microstructure of Co–W alloy coatings produced from a gluconate bath. Electrochimica Acta 2010, 55 (20), 5695–5708.
  • Su, F.; Liu, C.; Huang, P. Establishing relationships between electrodeposition techniques, microstructure and properties of nanocrystalline Co–W alloy coatings. Journal of Alloys and Compounds 2013, 557 (25), 228–238.
  • Arganaraz, M.P.Q.; Ribotta, S.B.; Folquer, M.E.; Gassa, L.M.; Benítez, G.; Vela, M.E.; Salvarezza, R.C. Ni–W coatings electrodeposited on carbon steel: Chemical composition, mechanical properties and corrosion resistance. Electrochimica Acta 2011, 56 (17), 5898–5903.
  • Arganaraz, M.P.Q.; Ribotta, S.B.; Folquer, M.E.; Gassa, L.M.; Benítez, G.; Vela, M.E.; Salvarezza, RC. The electrochemistry of nanostructured Ni–W alloys. Journal of Solid State Electrochemistry 2012, 17 (2), 307–313.
  • Yu, M.; Lourie, O.; Dyer, M.J.; Moloni, K.; Kelly, T.F.; Ruoff, R.S. Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load. Science 2000, 287 (5453), 637–640.
  • Ruoff, R.S.; Lorents, D.C. Mechanical and thermal properties of carbon nanotubes. Carbon 1995, 33 (7), 925–930.
  • Treacy, M.M.J.; Ebbesen, T.W.; Gibson, J.M. Exceptionally high Young's modulus observed for individual carbon nanotubes. Nature 1996, 381, 678–680.
  • Ajayan, P.M. Nanotubes from carbon. Chemical Reviews 1999, 99 (7), 1787–1799.
  • Oliver, W.C.; Pharr, G.M. Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodology. Journal of Materials Research 2004, 19 (1), 3–20.
  • Tabor, D. The physical meaning of indentation and scratch hardness. British Journal of Applied Physics 1956, 7, 159.
  • Tsyntsaru, N.I.; Belevskii, S.S.; Volodina, G.F.; Bersirova, O.L.; Yapontseva, S.; Kublanovskii, V.S.; Dikusar, A.I. Composition, structure, and corrosion properties of coatings of Co-W alloys electrodeposited under direct current. Surface Engineering and Applied Electrochemistry 2007, 43 (5), 312–317.
  • Arsenault, R.J.; Shi, N. Dislocation generation due to differences between the coefficients of thermal expansion. Materials Science and Engineering 1986, 81, 175–187.
  • Davis, J.R. ASM Specialty Handbook: Nickel, Cobalt, and their Alloys; ASM International: Novelty, OH, 2000; 347pp.
  • Lassner, E.; Schubert, W.-D. Tungsten: Properties, Chemistry, Technology of the Element, Alloys, and Chemical Compounds; Kluwer Academic, Plenum Publishers: New York, NY, 1999; 9pp.
  • Orowan, E. über den mechanismus des gleitvorganges (Mechanisms of sliding process). Zeitschrift fur physik 1934, 89, 634.
  • Clyne, T.W. An Introduction to Metal Matrix Composites; Cambridge University Press: London, UK, 1995; 282pp.
  • Ebbsen, T.W. Wetting, filling and decorating carbon nanotubes. Journal of Physics and Chemistry of Solids 1996, 57, 951–955.
  • Han, X.J.; Wang, N.; Wei, B. Thermophysical properties of undercooled liquid cobalt. Philosophical Magazine Letters 2002, 82, 451–459.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.