Nanostructured and Nonsymmetrical NiO–SDC/SDC Composite Anode Performance via a Microwave-Assisted Route for Intermediate-Temperature Solid Oxide Fuel Cells

REFERENCES

• Pilkington, A.; Lee, L.L.; Chan, C.K.; Ramakrishna, S. Defining key inventors: A comparison of fuel cell and nanotechnology industries. Technological Forecasting and Social Change 2009, 76, 118–127.
   Web of Science ®Google Scholar
• Zanganeh, N.; Rajabi, A.; Torabi, M.; Allahkarami, M.; Moghaddas, A.; Sadrnezhaad, S. Growth and microstructural investigation of multiwall carbon nanotubes fabricated using electrodeposited nickel nanodeposits and chemical vapor deposition method. Journal of Molecular Structure 2014, 1074, 250–254.
   Web of Science ®Google Scholar
• Zanganeh, N.; Zanganeh, S.; Rajabi, A.; Allahkarami, M.; Rahbari Ghahnavyeh, R.; Moghaddas, A.; Aieneravaie, M.; Asadizanjani, N.; Sadrnezhaad, S. K. Flower-like boehmite nanostructure formation in two-steps. Journal of Coordination Chemistry 2014, 1–14.
   Google Scholar
• Greco, F.; Frandsen, H.L.; Nakajo, A.; Madsen, M.F. Modelling the impact of creep on the probability of failure of a solid oxide fuel cell stack. Journal of the European Ceramic Society 2014, 34, 2695–2704.
   Web of Science ®Google Scholar
• Xiao, J.; Sun, W.; Tao, Z.; Zhu, Z.; Liu, W. Fabrication and electrochemical characterization of anode‐supported microtubular solid oxide fuel cells based on Ce0.8Sm0.2O2‐δ electrolytes. International Journal of Applied Ceramic Technology 2012, 9, 1064–1070.
   Web of Science ®Google Scholar
• Nie, L.; Wang, Q.; Liu, J. Gelcasting of NiO/YSZ tubular anode-supports for solid oxide fuel cells. Materials and Manufacturing Processes 2013, 29, 1153–1156.
   Web of Science ®Google Scholar
• Seyednezhad, M.; Rajabi, A.; Muchtar, A.; Somalu, M.R. Characterization of IT-SOFC non-symmetrical anode sintered through conventional furnace and microwave. Ceramics International 2015, 41, 5663–5669.
   Web of Science ®Google Scholar
• Kawano, M.; Yoshida, H.; Hashino, K.; Ijichi, H.; Suda, S.; Kawahara, K.; Inagaki, T. Synthesis of matrix-type NiO–SDC composite particles by spray pyrolysis with acid addition for development of SOFC cermet anode. Journal of Power Sources 2007, 173, 45–52.
   Web of Science ®Google Scholar
• Somalu, M.; Yufit, V.; Brandon, N. The effect of solids loading on the screen-printing and properties of nickel/scandia-stabilized-zirconia anodes for solid oxide fuel cells. International Journal of Hydrogen Energy 2013, 38, 9500–9510.
   Web of Science ®Google Scholar
• Setz, L.; Santacruz, I.; Colomer, M.; Mello-Castanho, S.; Moreno, R. Fabrication of Sr- and Co-doped lanthanum chromite interconnectors for SOFC. Materials Research Bulletin 2011, 46, 983–986.
   Web of Science ®Google Scholar
• Razavi, M.; Rahimipour, M.; Rajabi, A. Prenucleation effect on characterisations of synthesised nanocrystalline tungsten carbide via mechanical milling. Materials Science and Technology 2013, 28, 145–154.
   Web of Science ®Google Scholar
• Rajabi, A.; Ghazali, M.J.; Daud, A.R. Chemical composition, microstructure and sintering temperature modifications on mechanical properties of TiC-based cermet—A review. Materials & Design 2015, 67, 95–106.
   Web of Science ®Google Scholar
• Li, X.; Lu, J.; Wang, H. Effects of laminating and co-firing conditions on the performance of anode-supported Ce0.8Sm0. 201.9 film electrolyte. Science of Sintering 2011, 43, 305–312.
   Web of Science ®Google Scholar
• Sastry, C.V.; Janardhana, G.R.; Kun, K.S. Some studies on densification behavior modeling of Al–Pb alloys produced by different routes. Materials and Manufacturing Processes 2009, 24, 1389–1397.
   Web of Science ®Google Scholar
• Rajabi, A.; Ghazali, M.; Syarif, J.; Daud, A. Development and application of tool wear: A review of the characterization of TiC-based cermets with different binders. Chemical Engineering Journal 2014, 255, 445–452.
   Web of Science ®Google Scholar
• Rosa, R.; Veronesi, P.; Han, S.; Casalegno, V.; Salvo, M.; Colombini, E.; Leonelli, C.; Ferraris, M. Microwave assisted combustion synthesis in the system Ti–Si–C for the joining of SiC: Experimental and numerical simulation results. Journal of the European Ceramic Society 2013, 33, 1707–1719.
   Web of Science ®Google Scholar
• Rajabi, A.; Aieneravaie, M.; Dorosti, V.; Sadrnezhaad, S. Development and biomedical application of nanocomposites: In situ fabrication of ZnO-PbO nanocomposite through microwave method. Materials Technology: Advanced Performance Materials 2014, 29, 227–231.
   Web of Science ®Google Scholar
• Demirskyi, D.; Cheng, J.; Agrawal, D.; Ragulya, A. Densification and grain growth during microwave sintering of titanium diboride. Scripta Materialia 2013, 69, 610–613.
   Web of Science ®Google Scholar
• Li, H.; Lei, T.; Zhao, J.; Shang, Q.; Lin, Z. Production of Ti-13Nb-13Zr alloy by powder metallurgy (P/M) via sintering hydrides. Materials and Manufacturing Processes 2016, 31, 719–724.
   Web of Science ®Google Scholar
• Salahinejad, E.; Amini, R.; Marasi, M.; Hadianfard, M.J. The effect of sintering time on the densification and mechanical properties of a mechanically alloyed Cr–Mn–N stainless steel. Materials & Design 2010, 31, 527–532.
   Web of Science ®Google Scholar
• Prabhakaran, K.; Patil, D.; Dayal, R.; Gokhale, N.; Sharma, S. Synthesis of nanocrystalline magnesium aluminate (MgAl2O−4) spinel powder by the urea–formaldehyde polymer gel combustion route. Materials Research Bulletin 2009, 44, 613–618.
   Web of Science ®Google Scholar
• Bortzmeyer, D. Dry Pressing of Ceramic Powders. Ceramic Processing; Springer, 1995; pp 102–146.
   Google Scholar
• Wu, Y.; Kim, G.-Y. Compaction behavior of Al6061 and SiC binary powder mixture in the mushy state. Journal of Materials Processing Technology 2015, 216, 484–491.
   Web of Science ®Google Scholar
• Meybodi, S.M.; Bafrooei, H.B.; Ebadzadeh, T.; Tazike, M. Microstructure and mechanical properties of Al2O3–20 wt% Al2TiO5 composite prepared from alumina and titania nanopowders. Ceramics International 2013, 39, 977–982.
   Web of Science ®Google Scholar
• Somalu, M.; Yufit, V.; Cumming, D.; Lorente, E.; Brandon, N. Fabrication and characterization of Ni/ScSZ cermet anodes for IT-SOFCs. International Journal of Hydrogen Energy 2011, 36, 5557–5566.
   Web of Science ®Google Scholar
• Matula, G.; Jardiel, T.; Jimenez, R.; Levenfeld, B.; Várez, A. Microstructure, mechanical and electrical properties of Ni-YSZ anode supported solid oxide fuel cells. Archives of Materials Science and Engineering 2008, 32, 21–24.
   Google Scholar
• Rossmeisl, J.; Bessler, W.G. Trends in catalytic activity for SOFC anode materials. Solid State Ionics 2008, 178, 1694–1700.
   Web of Science ®Google Scholar
• Ren, M. Development of porous metal-supported solid oxide fuel cells. Master of Applied Science thesis, McMaster University, Hamilton, Ontario, Canada, 2013.
   Google Scholar
• Patil, B.; Ganesan, V.; Pawar, S. Studies on spray deposited NiO–SDC composite films for solid oxide fuel cells. Journal of Alloys and Compounds 2008, 460, 680–687.
   Web of Science ®Google Scholar
• Tekeli, S. The solid solubility limit of Al2O3 and its effect on densification and microstructural evolution in cubic-zirconia used as an electrolyte for solid oxide fuel cell. Materials & Design 2007, 28, 713–716.
   Web of Science ®Google Scholar
• Ali, S.M.; Muchtar, A.; Sulong, A.B.; Muhamad, N.; Majlan, E.H. Influence of sintering temperature on the power density of samarium-doped-ceria carbonate electrolyte composites for low-temperature solid oxide fuel cells. Ceramics International 2013, 39, 5813–5820.
   Web of Science ®Google Scholar
• Molla, T.T.; Frandsen, H.L.; Bjørk, R.; Olevsky, E.; Pryds, N. Modeling kinetics of distortion in porous bi-layered structures. Journal of the European Ceramic Society 2013, 33, 1297–1305.
   Web of Science ®Google Scholar
• Fergus, J.; Hui, R.; Li, X.; Wilkinson, D.P.; Zhang, J. Solid Oxide Fuel Cells: Materials Properties and Performance; CRC Press, 2008.
   Google Scholar
• Dey, T.; Dey, A.; Ghosh, P.C.; Bose, M.; Mukhopadhyay, A.K.; Basu, R.N. Influence of microstructure on nano-mechanical properties of single planar solid oxide fuel cell in pre-and post-reduced conditions. Materials & Design 2014, 53, 182–191.
   Web of Science ®Google Scholar
• Chen, K.; Chen, X.; Lü, Z.; Ai, N.; Huang, X.; Su, W. Performance evolution of NiO/yttria-stabilized zirconia anodes fabricated at different compaction pressures. Electrochimica Acta 2009, 54, 1355–1361.
   Web of Science ®Google Scholar
• Buergler, B.; Santschi, Y.; Felberbaum, M.; Gauckler, L. Influence of anode thickness on the electrochemical performance of single chamber solid oxide fuel cells. Advances in Solid Oxide Fuel Cells II: Ceramic Engineering and Science Proceedings 2008, 27 (4), 37–45.
   Google Scholar