Adjustment of Aging Temperature for Reaching Superelasticity in Highly Ni-Rich Ti-51.5Ni NiTi Shape Memory Alloy

REFERENCES

• Otsuka, K.; Ren, X. Physical metallurgy of Ti–Ni-based shape memory alloys. Progress in Materials Science 2005, 50, 511–678.
   Web of Science ®Google Scholar
• Adharapurapu, R.R.; Jiang, F.; Vecchio, K.S.; Gray Iii, G.T. Response of NiTi shape memory alloy at high strain rate: A systematic investigation of temperature effects on tension–compression asymmetry. Acta Materialia 2006, 54, 4609–4620.
   Web of Science ®Google Scholar
• Chen, B.; Liu, F.-S. Phase transformation behavior and mechanical properties of Ti50Ni49-x Fe1Co x shape memory alloys. Rare Metals 2013, 32, 225–227.
   Web of Science ®Google Scholar
• Huang, X.; Liu, Y. Effect of annealing on transformation behavior and superelasticity of NiTi shape memory alloy. Scripta Materialia 2001, 45, 153–160.
   Web of Science ®Google Scholar
• Uchil, J. Shape memory alloys – Characterization techniques. Pramana —Journal of Physics 2002, 58, 1131–1139.
   Web of Science ®Google Scholar
• Bernard, S.; Krishna Balla, V.; Bose, S.; Bandyopadhyay, A. Compression fatigue behavior of laser processed porous NiTi alloy. Journal of the Mechanical Behavior of Biomedical Materials 2012, 13, 62–68.
   PubMed Web of Science ®Google Scholar
• Jiang, F.; Liu, Y.; Yang, H.; Li, L.; Zheng, Y. Effect of ageing treatment on the deformation behaviour of Ti–50.9 at.% Ni. Acta Materialia 2009, 57, 4773–4781.
   Web of Science ®Google Scholar
• Seyyed Aghamiri, S.M.; Ahmadabadi, M.N.; Raygan, S. Combined effects of different heat treatments and Cu element on transformation behavior of NiTi orthodontic wires. Journal of the Mechanical Behavior of Biomedical Materials 2011, 4, 298–302.
   PubMed Web of Science ®Google Scholar
• Gall, K.; Sehitoglu, H.; Chumlyakov, Y.I.; Kireeva, I.V. Pseudoelastic cyclic stress-strain response of over-aged single crystal Ti-50.8 at%Ni. Scripta Materialia 1998, 40, 7–12.
   Web of Science ®Google Scholar
• Crone, W.C.; Wu, D.; Perepezko, J.H. Pseudoelastic behavior of nickel–titanium melt-spun ribbon. Materials Science and Engineering: A 2004, 375–377, 1177–1181.
   Web of Science ®Google Scholar
• Karimzadeh, M.; Aboutalebi, M.R.; Salehi, M.T.; Abbasi, S.M.; Morakabati, M. A study on the pseudoelasticity of low temperature aged and thermomechanically treated Ti-51.5 at.% Ni shape memory alloy. International Journal of Materials Research 2014, 105, 1173–1178.
   Web of Science ®Google Scholar
• Kim, J.I.; Liu, Y.; Miyazaki, S. Ageing-induced two-stage R-phase transformation in Ti–50.9 at.%Ni. Acta Materialia 2004, 52, 487–499.
   Web of Science ®Google Scholar
• Liu, Y.; Kim, J.I.; Miyazaki, S. Thermodynamic analysis of ageing-induced multiple-stage transformation behaviour of NiTi. Philosophical Magazine 2004, 84, 2083–2102.
   Web of Science ®Google Scholar
• Kazemi-Choobi, K.; Khalil-Allafi, J.; Abbasi-Chianeh, V. Influence of recrystallization and subsequent aging treatment on superelastic behavior and martensitic transformation of Ni50.9Ti wires. Journal of Alloys and Compounds 2014, 582, 348–354.
   Web of Science ®Google Scholar
• Chan, C.W.; Chan, S.H.J.; Man, H.C.; Ji, P. 1-D constitutive model for evolution of stress-induced R-phase and localized Lüders-like stress-induced martensitic transformation of super-elastic NiTi wires. International Journal of Plasticity 2012, 32–33, 85–105.
   Web of Science ®Google Scholar
• Liu, Y.; Favier, D. Stabilisation of martensite due to shear deformation via variant reorientation in polycrystalline NiTi. Acta Materialia 2000, 48, 3489–3499.
   Web of Science ®Google Scholar
• Nili-Ahmadabadi, M.; Shahmir, H.; Naghdi, F. Superelastic behavior of aged and thermomechanical treated NiTi alloy at Af + 10°C. Materials and Design 2011, 32, 365–370.
   Web of Science ®Google Scholar
• Chu, C.L.; Chung, C.Y.; Lin, P.H. DSC study of the effect of aging temperature on the reverse martensitic transformation in porous Ni-rich NiTi shape memory alloy fabricated by combustion synthesis. Materials Letters 2005, 59, 404–407.
   Web of Science ®Google Scholar
• Khalil-Allafi, J.; Dlouhy, A.; Eggeler, G. Ni4Ti3-precipitation during aging of NiTi shape memory alloys and its influence on martensitic phase transformations. Acta Materialia 2002, 50, 4255–4274.
   Web of Science ®Google Scholar
• Elahinia, M.H.; Hashemi, M.; Tabesh, M.; Bhaduri, S.B. Manufacturing and processing of NiTi implants: A review. Progress in Materials Science 2012, 57, 911–946.
   Web of Science ®Google Scholar
• Seyyed Aghamiri, S.M.; Nili Ahmadabadi, M.; Shahmir, H.; Naghdi, F.; Raygan, S. Study of thermomechanical treatment on mechanical-induced phase transformation of NiTi and TiNiCu wires. Journal of the Mechanical Behavior of Biomedical Materials 2013, 21, 32–36.
   PubMed Web of Science ®Google Scholar
• Nishida, M.; Wayman, C.; Honma, T. Precipitation processes in near-equiatomic TiNi shape memory alloys. Metallurgical and Materials Transactions A 1986, 17, 1505–1515.
   Web of Science ®Google Scholar
• Fan, G.; Chen, W.; Yang, S.; Zhu, J.; Ren, X.; Otsuka, K. Origin of abnormal multi-stage martensitic transformation behavior in aged Ni-rich Ti–Ni shape memory alloys. Acta Materialia 2004, 52, 4351–4362.
   Web of Science ®Google Scholar
• Nishida, M.; Hara, T.; Ohba, T.; Yamaguchi, K.; Tanaka, K.; Yamauchi, K. Experimental consideration of multistage martensitic transformation and precipitation behavior in aged Ni-rich Ti-Ni shape memory alloys. Materials Transactions 2003, 44, 2631–2636.
   Web of Science ®Google Scholar
• Gil, F.J.; Espinar, E.; Llamas, J.M.; Manero, J.M.; Ginebra, M.P. Variation of the superelastic properties and nickel release from original and reused NiTi orthodontic archwires. Journal of the Mechanical Behavior of Biomedical Materials 2012, 6, 113–119.
   PubMed Web of Science ®Google Scholar
• Shahmir, H.; Nili-Ahmadabadi, M.; Naghdi, F.; Habibi-Parsa, M.; Haririan, I. Control of superelastic behavior of NiTi wires aided by thermomechanical treatment with reference to three-point bending. Journal of Materials Engineering and Performance 2014, 23, 1386–1391.
   Web of Science ®Google Scholar
• Zheng, Y.; Jiang, F.; Li, L.; Yang, H.; Liu, Y. Effect of ageing treatment on the transformation behaviour of Ti–50.9 at.% Ni alloy. Acta Materialia 2008, 56, 736–745.
   Web of Science ®Google Scholar
• Henderson, E.; Nash, D.H.; Dempster, W.M. On the experimental testing of fine nitinol wires for medical devices. Journal of the Mechanical Behavior of Biomedical Materials 2011, 4, 261–268.
   PubMed Web of Science ®Google Scholar
• Khaleghi, F.; Khalil-Allafi, J.; Abbasi-Chianeh, V.; Noori, S. Effect of short-time annealing treatment on the superelastic behavior of cold drawn Ni-rich NiTi shape memory wires. Journal of Alloys and Compounds 2013, 554, 32–38.
   Web of Science ®Google Scholar
• Kazemi-Choobi, K.; Khalil-Allafi, J.; Abbasi-Chianeh, V. Investigation of the recovery and recrystallization processes of Ni50.9Ti49.1 shape memory wires using in situ electrical resistance measurement. Materials Science and Engineering: A 2012, 551, 122–127.
   Web of Science ®Google Scholar
• Khalil-Allafi, J.; Eggeler, G.; Dlouhy, A.; Schmahl, W.W.; Somsen, C. On the influence of heterogeneous precipitation on martensitic transformations in a Ni-rich NiTi shape memory alloy. Materials Science and Engineering: A 2004, 378, 148–151.
   Web of Science ®Google Scholar
• Dlouhy, A.; Khalil-Allafi, J.; Eggeler, G. Multiple-step martensitic transformations in Ni-rich NiTi alloys—An in-situ transmission electron microscopy investigation. Philosophical Magazine 2003, 83, 339–363.
   Web of Science ®Google Scholar
• Liu, Y.; Blanc, M.; Tan, G.; Kim, J.I.; Miyazaki, S. Effect of ageing on the transformation behaviour of Ti–49 at.% Ni. Materials Science and Engineering: A 2006, 438–440, 617–621.
   Web of Science ®Google Scholar
• Pelton, A.R.; DiCello, J.; Miyazaki, S. Optimisation of processing and properties of medical grade Nitinol wire. Minimally Invasive Therapy & Allied Technologies 2000, 9, 107–118.
   Web of Science ®Google Scholar
• Adharapurapu, R.R.; Vecchio, K.S. Superelasticity in a new bioimplant material: Ni-rich 55NiTi alloy. Experimental Mechanics 2007, 47, 365–371.
   Web of Science ®Google Scholar
• Otsuka, K.; Shimizu, K. Memory effect and thermoelastic martensite transformation in Cu-Al-Ni alloy. Scripta Metallurgica 1970, 4, 469–472.
   Google Scholar
• Otsuka, K.; Wayman, C.M.; Nakai, K.; Sakamoto, H.; Shimizu, K. Superelasticity effects and stress-induced martensitic transformations in Cu-Al-Ni alloys. Acta Metallurgica 1976, 24, 207–226.
   Google Scholar
• Otsuka, K.; Wayman, C.M. Shape Memory Materials; Cambridge University Press: UK, 1998.
   Google Scholar
• Miyazaki, S.; Otsuka, K. Deformation and transition behavior associated with the R-phase in Ti-Ni alloys. Metallurgical and Materials Transactions A 1986, 17, 53–63.
   Web of Science ®Google Scholar
• Sinha, A.; Mondal, B.; Chattopadhyay, P.P. Mechanical properties of Ti–(∼49 at%) Ni shape memory alloy, Part II: Effect of ageing treatment. Materials Science and Engineering: A 2013, 561, 344–351.
   Web of Science ®Google Scholar
• Gall, K.; Juntunen, K.; Maier, H.J.; Sehitoglu, H.; Chumlyakov, Y.I. Instrumented micro-indentation of NiTi shape-memory alloys. Acta Materialia 2001, 49, 3205–3217.
   Web of Science ®Google Scholar
• Gall, K.; Sehitoglu, H.; Chumlyakov, Y.I.; Kireeva, I.V. Tension–compression asymmetry of the stress–strain response in aged single crystal and polycrystalline NiTi. Acta Materialia 1999, 47, 1203–1217.
   Web of Science ®Google Scholar
• Gall, K.; Sehitoglu, H.; Chumlyakov, Y.I.; Kireeva, I.V.; Maier, H.J. The influence of aging on critical transformation stress levels and martensite start temperatures in NiTi: Part I—Aged microstructure and micro-mechanical modeling. Transactions of the ASME Journal of Engineering Materials and Technology 1999, 121, 19–27.
   Web of Science ®Google Scholar
• Gall, K.; Sehitoglu, H.; Chumlyakov, Y.I.; Kireeva, I.V.; Maier, H.J. The influence of aging on critical transformation stress levels and martensite start temperatures in NiTi: Part II—Discussion of experimental results. Transactions of the ASME Journal of Engineering Materials and Technology 1999, 121, 28–37.
   Web of Science ®Google Scholar
• Motemani, Y.; Nili-Ahmadabadi, M.; Tan, M.J.; Bornapour, M.; Rayagan, S. Effect of cooling rate on the phase transformation behavior and mechanical properties of Ni-rich NiTi shape memory alloy. Journal of Alloys and Compounds 2009, 469, 164–168.
   Web of Science ®Google Scholar
• Sadrnezhaad, S.K.; Mirabolghasemi, S.H. Optimum temperature for recovery and recrystallization of 52Ni48Ti shape memory alloy. Materials & Design 2007, 28, 1945–1948.
   Web of Science ®Google Scholar
• Lei, X.; Rui, W.; Yong, L. The optimization of annealing and cold-drawing in the manufacture of the Ni–Ti shape memory alloy ultra-thin wire. The International Journal of Advanced Manufacturing Technology 2011, 55, 905–910.
   Web of Science ®Google Scholar
• Khelfaoui, F.; Guénin, G. Influence of the recovery and recrystallization processes on the martensitic transformation of cold worked equiatomic Ti–Ni alloy. Materials Science and Engineering: A 2003, 355, 292–298.
   Web of Science ®Google Scholar