260
Views
10
CrossRef citations to date
0
Altmetric
Original Articles

Experimental Investigation of Wire Arrangements for Narrow-Gap Triple-Wire Gas Indirect Arc Welding

, &
Pages 2136-2142 | Received 11 Jun 2015, Accepted 15 Aug 2015, Published online: 25 Jul 2016

REFERENCES

  • Agrawal, B.P.; Ghosh, P.K. Thermal modeling of multipass narrow gap pulse current GMA welding by single seam per layer deposition technique. Materials and Manufacturing Processes 2010, 25, 1251–1268.
  • Knyaz'kov, A.F.; Krampit, N.YU.; Krampit, A.G. Improving the process of narrow-gap pulsed-arc CO2 welding. Welding International 2004, 18 (6), 486–488.
  • Hori, K.; Haneda, M. Narrow gap arc welding. Journal of the Japan Welding Society 1999, 68 (3), 41–59.
  • Karimzadeh, F.; Salehi, M.; Saatchi, A.; Meratian, M. Effect of microplasma arc welding process parameters on grain growth and porosity distribution of then sheet Ti6Al4V alloy weldment. Materials and Manufacturing Processes 2005, 20, 205–219.
  • Zhang, M.; Yang, L.; Li, J.H. Submerged arc welding X100 pipeline steels. Materials and Manufacturing Processes 2014, 29, 64–68.
  • Bhattacharya, A.; Bera, T.K. Development of automatic GMAW setup for process improvements: experimental and modeling approach. Materials and Manufacturing Processes 2014, 29, 988–995.
  • Xu, W.H.; Lin, S.B.; Fan, C.L.; Yang, C.L. Evaluation on microstructure and mechanical properties of high-strength low-alloy steel joints with oscillating arc narrow gap GMA welding. International Journal of Advanced Manufacturing Technology 2014, 75, 1439–1446.
  • Zheng, S.X.; Zhu, L.; Huang, B.W.; Chen, J.H. Constricted arc by flux strips applied to ultra-narrow gap welding. Journal of Mechanical Engineering 2009, 45 (2), 219–223.
  • Krampit, A.G.; Krampit, N.Yu.; Krampit, M.A. Effect of the parameters of pulsed arc welding on the formation of a root layer in a narrow gap. Welding International 2014, 28 (8), 629–630.
  • Krampit, A.G. Calculation of the parameters of narrow gap pulsed arc welding of the root layer. Welding International 2014, 28 (7), 547–550.
  • Cui, H.C.; Jiang, Z.D.; Tang, X.H.; Lu, F.G. Research on narrow-gap GMAW with swing arc system in horizontal position. International Journal of Advanced Manufacturing Technology 2014, 74, 297–305.
  • Zhao, B.; Fan, C.L.; Yang, C.L.; Zhang, L.F. Effect of double-wire narrow gap GMA welding parameters on weld appearance. Hanjie Xuebao 2008, 29 (6), 81–85.
  • Fang, D.S.; Song, G. A novel method of triple-wire gas indirect arc welding. Materials and Manufacturing Processes, 2015. doi:10.1080/10426914.2015.1058949.
  • Li, W.H.; Gao, K.I; Wu, J.; Wang, J.Y.; Ji, Y.H. Groove sidewall penetration modeling for rotating arc narrow gap MAG welding. International Journal of Advanced Manufacturing Technology 2015, 78, 573–581.
  • Boulos, M.I. Thermal Plasma Fundamentals and Applications. Plenum Press: New York, 1994.
  • Wu, C.S.; Huo, Y.S. Numerical analysis of keyhole geometry and temperature profiles in plasma arc welding. Journal of Manufacturing Processes 2013, 15, 593–599.
  • Zhang, G.J.; Xiong, J.; Gao, H.G.; Wu, L. Effect of process parameters on temperature distribution in twin-electrode TIG coupling arc. Journal of Quantitative Spectroscopy & Radiative Transfer 2012, 113, 1938–1945.
  • Kou, S.D. Welding Metallurgy. John & Sons, Inc.: Hoboken, New Jersey, 2003.
  • Moinuddin, S.Q.; Sharma, A. Arc stability and its impact on weld properties and microstructure in anti-phase synchronized synergic-pulsed twin-wire gas metal arc welding. Materials and Design 2015, 67, 293–302.
  • Zhu, M.; Shi, Y.; Wang, G.L.; Fan, D. Metal transfer behaviors in consumable double-electrode GMAW process. Journal of Mechanical Engineering 2013, 49 (12), 50–54.
  • Kiran, D.V.; Cho, D.W.; Song, W.H.; Na, S.J. Arc interaction and molten pool behavior in the three wire submerged arc welding process. International Journal of Heat and Mass Transfer 2015, 87, 327–340.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.