Optimization of MIG Welding Parameters to Control the Angular Distortion in Fe410WA Steel

REFERENCES

• Camilleri, D.; Micallef, D.; Mollicone, P. Thermal stresses and distortion developed in mild steel DH36 friction stir welded plates: an experimental and numerical assessment. Journal of Thermal Stresses 2015, 38 (5), 485–508.
   Web of Science ®Google Scholar
• Vasantharaja, P.; Maduarimuthu, V.; Vasudevan, M.; Palanichamy, P. Assessment of residual stresses and distortion in stainless steel weld joints. Materials and Manufacturing Processes 2012, 27 (12), 1376–1381.
   Web of Science ®Google Scholar
• Colegrove, P.; Ikeagu, C.; Thistlethwaite, A.; Williams, S.; Nagy, T.; Suder, W.; Steuwer, A.; Pirling T. The welding process impact on residual stress and distortion. Science and Technology of Welding and Joining 2009, 14 (8), 717–725.
   Web of Science ®Google Scholar
• Kim, Y.; Hirohata, M.; Murakami, M.; Inose, K. Effects of heat input of laser-arc hybrid welding on welding distortion and residual stress. Welding International 2015, 29 (4), 245–253.
   Google Scholar
• Gunaraj, V.; Murugan, V. Effect of process parameters on angular distortion of GMAW structural steel plates. Welding Journal (AWS) 2005, 165s–171s.
   Google Scholar
• Sudhakaran, R.; Murugan, V.; Sivasakthivel, P. Optimization of process parameters to minimize angular distortion in gas tungsten arc welded stainless steel 202 grade plates using particle swarm optimization. Journal of Engineering Science and Technology 2012, 7 (2), 195–208.
   Google Scholar
• Cabral, T.; Braga, E.; Mendonca, E.; Scott, A. Influence of procedures and transfer modes in reduction of deformations on marine structure panels. Welding International 2015, 29 (12), 928–936.
   Google Scholar
• Bhanupratap, R.; Mohammed, H.; Mahendramani, G. Effect of heat input on angular distortion of welded plates produced by submerged arc welding process. International Conference on Recent Development in Engineering and Technology, Mysore, Karnataka, India, 96–98, 2012.
   Google Scholar
• Ghosh P.; Devakumaran, K.; Pramanick, A. Effect of pulse current on shrinkage stress and distortion in multi-pass GMA welds of different groove sizes. Welding Journal (AWS) 2010, 89, 43s–53s.
   Web of Science ®Google Scholar
• Gill, J.; Singh, J. Effect of welding speed and heat input rate on stress concentration factor of butt welded joint of IS 2062 E250A steel. International Journal of Advanced Engineering Research and Studies 2012, I (III), 98–100.
   Google Scholar
• Kozak, J.; Kowalski, J. Problems of determination of welding angular distortions of T – fillet joints in ship hull structures. Polish Maritime Research 2015, 2 (86), 79–85.
   Google Scholar
• Okano, S.; Matsushita, K.; Mochizuki, M.; Toyoda, M.; Uetama, T. Experimental study on relationship between heat parameter and angular distortion. Welding International 2014, 28 (4), 289–300.
   Google Scholar
• Sakri, A.; Guidara, M.; Elhalouani, F. Numerical simulation of MIG type arc welding induced residual stresses and distortions in thin sheets of S235 steel. IOP Conference Series: Materials Science and Engineering 2010, 13, 1–7.
   Google Scholar
• Mochizuki, M.; Mikami, Y.; Okano, S.; Itoh, S. Computational simulation of weld microstructure and distortion by considering process Mechanics. Journal of Physics 2009, 165, 1–6.
   Google Scholar
• Waheed, R.; Shakoor, A.; Azam, K.; Khan, A.; Shah, F. Welding distortion control in thin metal plates by altering heat input through weld parameters. Technical Journal 2015, 20 (II), 171–177.
   Google Scholar
• Kim, M.; Kang, M.; Chung, H. Simplified welding distortion analysis for fillet welding using composite shell elements. International Journal of Naval Architecture and Ocean Engineering 2015, 7, 452–465.
   Web of Science ®Google Scholar
• Rao, P.; Kumar, R.; Mohanty, B. Distortion control in thin low carbon steel plates using sequential welding and restraints. International Journal of Scientific and Research Publications 2015, 5 (8), 1–9.
   Google Scholar
• Ross, P. Taguchi Techniques for Quality Engineering, McGraw-Hill, New York, 1988.
   Google Scholar
• Tarng, Y.; Yang, W. Optimisation of the weld bead geometry in gas tungsten arc welding by the Taguchi method. International Journal Advance Manufacturing Technology, Springer-Verlaglondon Limited 1998, 14, 549–554.
   Web of Science ®Google Scholar
• Joseph, V. Taguchi's approach to robust parameter design: a new perspective. School of Industrial and Systems Engineering, Georgia Institute of Technology, Atlanta, GA, USA, 1–20, 2005.
   Google Scholar
• Saha, A.; Mondal, S. Optimization of process parameters in submerged arc welding using multi-objectives Taguchi method. 5th International & 26th All India Manufacturing Technology, Design and Research Conference, IIT Guwahati, Assam, India, 40–1–40–6, 2014.
   Google Scholar
• Patil, S.; Waghmare, C. Optimization of MIG welding parameters for improving strength of welded joints. International Journal of Advanced Engineering Research and Studies 2013, 14–16.
   Google Scholar
• Muthukumaran, V.; Nagaraju, S.; Vasantharaja, P.; Chandrashekhar, N.; Jaykumar, T. Optimization of welding process parameters for 9Cr-1Mo steel using RSM and GA. Material and Manufacturing Processes 2015, doi:10.1080/10426914.2015.1025974.
   Web of Science ®Google Scholar
• Gadakh, V.; Shinde, V.; Khemnar, N. Optimization of welding process parameters using MOORA method. The International Journal of Advanced Manufacturing Technology 2013, 69 (9–12), 2031–2039.
   Web of Science ®Google Scholar