Influence of Solid Fraction Casting on Microstructure of Aluminum Alloy 6061

REFERENCES

• Abbasi-Khazaei, B.; Ghaderi, S. A novel process in semi-solid metal casting. Journal of Materials Science and Technology 2012, 28 (10), 946–950. doi:10.1016/S1005-0302(12)60156-X
   Web of Science ®Google Scholar
• Birol, Y. Semi solid processing of the primary aluminium die casting alloy A365. Journal of Alloys and Compounds, 2009, 473, 133–138. doi:10.1016/j.jallcom.2008.05.074
   Web of Science ®Google Scholar
• Zhu, W.; Mao, W.; Tu, Q. Preparation of semi-solid 7075 aluminium alloy slurry by serpentine pouring channel. Transition Nonferrous Metal Society of China, 2014, 24, 954–960. doi:10.1016/S1003-6326(14)63148-4
   Web of Science ®Google Scholar
• Shang, S.; Lu, G.; TANG, X.; Zhao, Z.; Wu, C. Deformation mechanism and forming properties of 6061 Al alloys during compression in semi-solid state. Transactions of Nonferrous Metals society of China, 2010, 20 (9), 1725–1730. doi: 10.1016/S1003-6326(09)60365-4
   Web of Science ®Google Scholar
• Zhang, J.; Guan, R.; Tie, D.; Wang, X.; Guan, X.; Chen, B.; Chen, Y. Effects of Technical Parameters of Semi – Solid Stirring and Rheo- rolling on Microstructure of A356–5wt.%B4C Composite Strip. Materials and Manufacturing Process, 2015, 30, 340–345. doi:10.1080/10426914.2014.941477
   Web of Science ®Google Scholar
• Becker, E.; Favier, V.; Bigot, R.; Cezard, P.; Langlois, L. Impact of experimental conditions on material response during forming of steel in semi-solid state. Journal of Materials Process Technology, 2010, 210 (11), 1482–1492. doi: 10.1016/j.jmatprotec.2010.04.006
   Web of Science ®Google Scholar
• Farahany, S.; Ourdjini, A. Effect of cooling rate and Si refiner/modifier on solidification pathways of Al-11.3–2Cu -0.4Fe alloy. Materials and Manufacturing Process, 2013, 28, 657–663. doi:10.1080/10426914.2013.763972
   Web of Science ®Google Scholar
• Janudom, S.; Wannasin, J.; Basem, J.; Wisutmethangoon, S. Characterization of flow behaviour of semi-solid slurries containing low solid fractions in high-pressure die casting. Acta Materialia, 2013, 61, 6267–6275. doi:10.1016/j.actamat.2013.07.010
   Web of Science ®Google Scholar
• Chucheep, T.; Burapa, R.; Janudom, S.; Wisutmethangoon, S.; Wannasin, J. Semi-solid gravity sand casting using gas induced semi-solid process. Transactions of Nonferrous Metals society of China, 2010, 20, s981–s987. doi:10.1016/S1003-6326(10)60617-6
   Google Scholar
• Khosravi, H.; Eslami-Farsani, R.; Askari-Paykani, M. Modelling and optimization of cooling slope process parameters for semi-solid casting of A356 Al alloy. Transactions of Nonferrous Metals society of China, 2013, 24, 961–968. doi:10.1016/S1003-6326(14)63149-6
   Web of Science ®Google Scholar
• Ahmad, A. H.; Naher, S.; Brabazone, D. The Effect of Direct Thermal Method, Temperature and Time on Microstructure of a Cast Aluminium Alloy. Materials and Manufacturing Process, 2014, 29, 134–139. doi:10.1080/10426914.2013.822980
   Web of Science ®Google Scholar
• Rao, A. K. P. Understanding the Evolution of the microstructure in melt-conditioned direct-chill cast al alloys. Materials and Manufacturing Processes, 2014, 29, 848–852. doi:10.1080/10426914.2014.92169
   Web of Science ®Google Scholar
• Wang, H. Semi-solid structure formation and Semi-solid casting. Journal of Material Science and Technology, 2005, 21, 65–71.
   Web of Science ®Google Scholar
• Ning, Z.L.; Wang, H.; Sun, J.F. Deformation behaviour of Semi-solid A356 alloy prepared by low temperature pouring. Materials and Manufacturing Processes, 2010, 25 (7), 648–653. doi: 10.1080/1042691090344727
   Web of Science ®Google Scholar
• Mahallawi, I. E.; Shash, Y.; Rashad, R. M.; Abdelaziz, M. H.; Mayer, J.; Schwedt, A. Hardness and Wear Behaviour of Semi-Solid Cast A390 Alloy Reinforced with Al2O3 and TiO2 Nanoparticles. Arabian journal of Science and Engineering, 2014, 39, 5171–5185. doi:10.1080/1042691050046478
   Web of Science ®Google Scholar
• Sharma, R.; Kumar, A.; Dwivedi, D.K. Influence of solution temperature on microstructure and mechanical properties of two cast Al–Si alloys. Materials and Manufacturing Processes, 2006, 21, 309–314. doi:10.1080/1042691050046478
   Web of Science ®Google Scholar
• Hashim, J.; Looney, L.; Hashmi, M. S. J. Particle distribution in cast metal matrix composite-PART I. Journal of Materials Process Technology, 2002, 123, 251–257. doi:10.1016/S0924-0136(02)00098-5
   Web of Science ®Google Scholar
• Ghomashchi, M.R.; Vikhrov, A. Squeeze casting: an overview. Journal of Materials Process Technology. 2000, 101, 001–009. doi:10.1016/S0924-0136(99)00291-5
   Web of Science ®Google Scholar
• Zhao, Z.Y.; Guan, R. G.; Wang, X.; Li, Y.; Dong, Lie; Lee, C.; Lui, C.M. Microstructure formation mechanism and properties of AZ61 alloy processed by melt treatment with vibrating cooling slope and semi-solid rolling. Metals and Materials International, 2013, 19 (5), 1063–1067. doi: 10.1007/s12540-013-5022-2
   Web of Science ®Google Scholar
• Swamy, N.H.S.; Joseph, M.A.; Nagarajan, N.M.; Sudarsan, N. Effects of rapid heating on microstructure and mechanical properties of modified vibrated Al-Si-Mg alloys using a fluidized bed. Materials and Manufacturing Processes, 2011, 26 (2), 210–217. doi: 10.1080/10426914.2010.505621
   Web of Science ®Google Scholar
• Birol, Y. The effect of homogenization practice on the microstructure of AA6063 billets. Journal of Materials Processing Technology, 2004, 148, 250–258. doi:10.1016/j.jmatprotec.2004.01.056
   Web of Science ®Google Scholar
• Birol, Y. Impact of grain size on mechanical properties of AlSi7Mg0.3 alloy. Materials Science & Engineering A, 2013, 559, 394–400. doi:10.1016/j.msea.2012.08.115
   Web of Science ®Google Scholar