Direct-write 3D printing of NdFeB bonded magnets

References

• Brown, D.; Ma, B.M.; Chen, Z.M. Developments in the processing and properties of NdFeb-type permanent magnets. Journal of Magnetism and Magnetic Materials 2002, 248 (3), 432–440. doi:10.1016/s0304-8853(02)00334-7.
   Web of Science ®Google Scholar
• Brown, D.N.; Chen, Z.; Guschl, P.; Campbell, P. Developments with melt spun RE-Fe-B powder for bonded magnets. Journal of Magnetism and Magnetic Materials 2006, 303 (2), E371–E374. doi:10.1016/j.jmmm.2006.01.141.
   Web of Science ®Google Scholar
• Brown, D.N.; Wu, Z.; He, F.; Miller, D.J.; Herchenroeder, J.W. Dysprosium-free melt-spun permanent magnets. Journal of Physics-Condensed Matter 2014, 26 (6). doi:10.1088/0953-8984/26/6/064202.
   PubMed Web of Science ®Google Scholar
• Croat, J.J. Current status and future outlook for bonded neodymium permanent magnets. Journal of Applied Physics 1997, 81 (8), 4804–4809. doi:10.1063/1.365469.
   Web of Science ®Google Scholar
• Hamada, N.; Mishima, C.; Mitarai, H.; Honkura, Y. Development of Nd-Fe-B anisotropic bonded magnet with 27 MGOe. IEEE Transactions on Magnetics 2003, 39 (5), 2953–2955. doi:10.1109/tmag.2003.815757.
   Web of Science ®Google Scholar
• Hamada, N.; Noguchi, K.; Mishima, C.; Honkura, Y. Development of anisotropic bonded magnet applied to 150 degrees C use. IEEE Transactions on Magnetics 2005, 41 (10), 3847–3849. doi:10.1109/tmag.2005.854870.
   Web of Science ®Google Scholar
• Hamada, N.; Noguchi, K.; Mishima, C.; Honkura, Y. Development of anisotropic bonded magnet with heat resistance. INTERMAG Asia 2005. Digests of the IEEE International Magnetics Conference, 2005, 941–942.
   Google Scholar
• Ormerod, J.; Constantinides, S. Bonded permanent magnets: Current status and future opportunities. Journal of Applied Physics 1997, 81 (8), 4816–4820. doi:10.1063/1.365471.
   Web of Science ®Google Scholar
• Sugimoto, S. Current status and recent topics of rare-earth permanent magnets. Journal of Physics D-Applied Physics 2011, 44 (6). doi:10.1088/0022-3727/44/6/064001.
   Web of Science ®Google Scholar
• Ghorbani, F.; Taghian, H.; Ebadi-Dehaghani, H. A study on the rheological and magnetic properties of polymer-bonded magnets using polycarbonate as the bonding material. Journal of Macromolecular Science, Part B 2014, 53 (7), 1293–1304.
   Web of Science ®Google Scholar
• Hull, C.W. The birth of 3D printing. Research-Technology Management 2015, 58 (6), 25–30.
   Web of Science ®Google Scholar
• Cesarano III, J.; King, B.H.; Denham, H. Recent Developments in Robocasting of Ceramics and Multimaterial Deposition; Sandia National Labs: Albuquerque, NM, United States, 1998.
   Google Scholar
• Collino, R.R.; Ray, T.R.; Fleming, R.C.; Cornell, J.D.; Compton, B.G.; Begley, M.R. Deposition of ordered two-phase materials using microfluidic print nozzles with acoustic focusing. Extreme Mechanics Letters 2016, 8, 96–106. doi: 10.1016/j.eml.2016.04.003.
   Web of Science ®Google Scholar
• Hardin, J.O.; Ober, T.J.; Valentine, A.D.; Lewis, J.A. Microfluidic printheads for multimaterial 3D printing of viscoelastic inks. Advanced Materials 2015, 27 (21), 3279–3284. doi:10.1002/adma.201500222.
   PubMed Web of Science ®Google Scholar
• Kokkinis, D.; Schaffner, M.; Studart, A.R. Multimaterial magnetically assisted 3D printing of composite materials. Nature Communications 2015, 6. doi:10.1038/ncomms9643.
   Web of Science ®Google Scholar
• Ahn, B.Y.; Duoss, E.B.; Motala, M.J.; Guo, X.; Park, S.-I.; Xiong, Y.; Yoon, J.; Nuzzo, R.G.; Rogers, J.A.; Lewis, J.A. Omnidirectional printing of flexible, stretchable, and spanning silver microelectrodes. Science 2009, 323 (5921), 1590–1593.
   PubMed Web of Science ®Google Scholar
• Sun, K.; Wei, T.S.; Ahn, B.Y.; Seo, J.Y.; Dillon, S.J.; Lewis, J.A. 3D printing of interdigitated li‐ion microbattery architectures. Advanced Materials 2013, 25 (33), 4539–4543.
   PubMed Web of Science ®Google Scholar
• Muth, J.T.; Vogt, D.M.; Truby, R.L.; Mengüç, Y.; Kolesky, D.B.; Wood, R.J.; Lewis, J.A. Embedded 3D printing of strain sensors within highly stretchable elastomers. Advanced Materials 2014, 26 (36), 6307–6312. doi:10.1002/adma.201400334.
   PubMed Web of Science ®Google Scholar
• Adams, J.J.; Duoss, E.B.; Malkowski, T.F.; Motala, M.J.; Ahn, B.Y.; Nuzzo, R.G.; Bernhard, J.T.; Lewis, J.A. Conformal printing of electrically small antennas on three-dimensional surfaces. Advanced Materials 2011, 23 (11), 1335–1340. doi:10.1002/adma.201003734.
   PubMed Web of Science ®Google Scholar
• Cao, Z.; Shi, J.; Torah, R.; Tudor, M.; Beeby, S. All dispenser printed flexible 3D structured thermoelectric generators. Journal of Physics: Conference Series 2015. IOP Publishing.
   PubMedGoogle Scholar
• Compton, B.G.; Lewis, J.A. 3D-printing of lightweight cellular composites. Advanced Materials 2014, 26 (34), 5930–5935. doi:10.1002/adma.201401804.
   PubMed Web of Science ®Google Scholar
• Jakus, A.E.; Taylor, S.L.; Geisendorfer, N.R.; Dunand, D.C.; Shah, R.N. Metallic architectures from 3D‐printed powder‐based liquid inks. Advanced Functional Materials 2015, 25 (45), 6985–6995.
   Web of Science ®Google Scholar
• Morissette, S.L.; Lewis, J.A.; Cesarano, J.; Dimos, D.B.; Baer, T.Y. Solid freeform fabrication of aqueous alumina-poly(vinyl alcohol) gelcasting suspensions. Journal of the American Ceramic Society 2000, 83 (10), 2409–2416.
   Web of Science ®Google Scholar
• Paranthaman, M.P.; Shafer, C.S.; Elliott, A.M.; Siddel, D.H.; McGuire, M.A.; Springfield, R.M.; Martin, J.; Fredette, R.; Ormerod, J. Binder Jetting: A Novel NdFeB bonded magnet fabrication process. JOM Journal of the Minerals, Metals and Materials Society 2016. doi:10.1007/s11837-016-1883-4.
   Web of Science ®Google Scholar
• Tekinalp, H.L.; Kunc, V.; Velez-Garcia, G.M.; Duty, C.E.; Love, L.J.; Naskar, A.K.; Blue, C.A.; Ozcan, S. Highly oriented carbon fiber-polymer composites via additive manufacturing. Composites Science and Technology 2014, 105, 144–150. doi:10.1016/j.compscitech.2014.10.009.
   Web of Science ®Google Scholar
• Gladman, A.S.; Matsumoto, E.A.; Nuzzo, R.G.; Mahadevan, L.; Lewis, J.A. Biomimetic 4D printing. Nature Materials 2016, 15 (4), 413–418. doi:10.1038/nmat4544.
   PubMed Web of Science ®Google Scholar
• Duty, C.E.; Kunc, V.; Compton, B.G.; Post, B.K.; Erdman, D.; Smith, R.J.; Lind, R.; Lloyd, P.; Love, L.J. Structure and mechanical behavior of big area additive manufacturing (BAAM) materials. Rapid Prototyping Journal 2016. Accepted.
   PubMed Web of Science ®Google Scholar
• Fernàndez-Francos, X.; Kazarian, S.G.; Ramis, X.; Serra, À. Simultaneous monitoring of curing shrinkage and degree of cure of thermosets by attenuated total reflection Fourier transform infrared (ATR FT-IR) spectroscopy. Applied Spectroscopy 2013, 67 (12), 1427–1436.
   PubMed Web of Science ®Google Scholar