Process parameters/material location affecting hooking in friction stir lap welding: Dissimilar aluminum alloys

References

• Deepandurai, K.; Parameshwaran, R. Multiresponse optimization of FSW parameters for cast AA7075/SiCp composite. Materials and Manufacturing Processes 2016, 31 (10), 1333–1341.
   Web of Science ®Google Scholar
• Selvaraj, M.; Murali, V.; Koteswara Rao, S. Mechanism of weld formation during friction stir welding of aluminum alloy. Materials and Manufacturing Processes 2013, 28 (5), 595–600.
   Web of Science ®Google Scholar
• Mehta, K.P.; Badheka, V.J. A review on dissimilar friction stir welding of copper to aluminum: process, properties, and variants. Materials and Manufacturing Processes 2016, 31 (3), 233–254.
   Web of Science ®Google Scholar
• Braga, D.F.; De Sousa, L.; Infante, V.; Da Silva, L.F.; Aluminium Friction-Stir, M.P. Weld-bonded Joints. The Journal of Adhesion 2016, 92 (7–9), 665–678.
   Web of Science ®Google Scholar
• Cox, C.D.; Gibson, B.T.; Strauss, A.M.; Cook, G.E. Effect of pin length and rotation rate on the tensile strength of a friction stir spot-welded al alloy: a contribution to automated production. Materials and Manufacturing Processes 2012, 27 (4), 472–478.
   Web of Science ®Google Scholar
• Wang, M.; Zhang, H.; Zhang, J.; Zhang, X.; Yang, L. Effect of pin length on hook size and joint properties in friction stir lap welding of 7B04 aluminum alloy. Journal of Materials Engineering and Performance 2014, 23 (5), 1881–1886.
   Web of Science ®Google Scholar
• Yazdanian, S.; Chen, Z.; Littlefair, G. Effects of friction stir lap welding parameters on weld features on advancing side and fracture strength of AA6060-T5 welds. Journal of Materials Science 2012, 47 (3), 1251–1261.
   Web of Science ®Google Scholar
• Dubourg, L.; Merati, A.; Jahazi, M. Process optimisation and mechanical properties of friction stir lap welds of 7075-T6 stringers on 2024-T3 skin. Materials & Design 2010, 31 (7), 3324–3330.
   Web of Science ®Google Scholar
• Song, Y.; Yang, X.; Cui, L.; Hou, X.; Shen, Z.; Xu, Y. Defect features and mechanical properties of friction stir lap welded dissimilar AA2024–AA7075 aluminum alloy sheets. Materials & Design 2014, 55, 9–18.
   Web of Science ®Google Scholar
• Behmand, S.; Mirsalehi, S.; Omidvar, H.; Safarkhanian, M. Single-and double-pass FSW lap joining of AA5456 sheets with different thicknesses. Materials Science and Technology 2016, 32 (5), 438–445.
   Web of Science ®Google Scholar
• Buffa, G.; Campanile, G.; Fratini, L.; Prisco, A. Friction stir welding of lap joints: influence of process parameters on the metallurgical and mechanical properties. Materials Science and Engineering: A 2009, 519 (1), 19–26.
   Web of Science ®Google Scholar
• Cederqvist, L.; Reynolds, A. Factors affecting the properties of friction stir welded aluminum lap joints. Welding Journal-New York 2001, 80 (12), 281–287.
   Web of Science ®Google Scholar
• Tweedy, B.; Sellmeyer, S.; Jahn, A.; Burford, D. Static strength comparison of riveted versus friction stir welded stiffened panels. Aiaa 2006, 2266, 8–9.
   Google Scholar
• Costa, M.; Verdera, D.; Leitão, C.; Rodrigues, D. Dissimilar friction stir lap welding of AA 5754-H22/AA 6082-T6 aluminium alloys: influence of material properties and tool geometry on weld strength. Materials & Design 2015, 87, 721–731.
   Web of Science ®Google Scholar
• Soundararajan, V.; Yarrapareddy, E.; Kovacevic, R. Investigation of the friction stir lap welding of aluminum alloys AA 5182 and AA 6022. Journal of Materials Engineering and Performance 2007, 16 (4), 477–484.
   Web of Science ®Google Scholar
• Frolov, V.; Konkevich, V.Y.; Predko, P.Y.; Belotserkovets, V. Friction stir welding of V95 alloy of the Al–Zn–Mg–Cu system strengthened by heat treatment. Welding International 2014, 28 (3), 228–233.
   Google Scholar
• Kumar, K.; Kailas, S.V. The role of friction stir welding tool on material flow and weld formation. Materials Science and Engineering: A 2008, 485 (1), 367–374.
   Web of Science ®Google Scholar
• Fratini, L.; Buffa, G.; Micari, F.; Shivpuri, R. On the material flow in FSW of T-joints: influence of geometrical and tecnological parameters. The International Journal of Advanced Manufacturing Technology 2009, 44 (5–6), 570–578.
   Web of Science ®Google Scholar
• Elangovan, K.; Balasubramanian, V. Influences of tool pin profile and tool shoulder diameter on the formation of friction stir processing zone in AA6061 aluminium alloy. Materials & Design 2008, 29 (2), 362–373.
   Web of Science ®Google Scholar
• Lorrain, O.; Favier, V.; Zahrouni, H.; Lawrjaniec, D. Understanding the material flow path of friction stir welding process using unthreaded tools. Journal of Materials Processing Technology 2010, 210 (4), 603–609.
   Web of Science ®Google Scholar
• Zhang, H.; Zhang, Z.; Chen, J. 3D modeling of material flow in friction stir welding under different process parameters. Journal of Materials Processing Technology 2007, 183 (1), 62–70.
   Web of Science ®Google Scholar
• Rajesh, S.; Badheka, V. Influence of heat input/multiple passes and post weld heat treatment on strength/electrochemical characteristics of friction stir weld joint. Materials and Manufacturing Processes 2017, 1–9. doi:10.1080/10426914.2017.1279310.
   Google Scholar