WEDM process parameter optimization of FSPed copper-BN composites

References

• Wu, Z.; Kang, P.C.; Wu, G.H.; Guo, Q.; Chen, G.Q.; Jiang, L.T. The effect of interface modification on fracture behavior of tungsten fiber reinforced copper matrix composites. Materials Science and Engineering A 2012, 536, 45–48.
   Web of Science ®Google Scholar
• Jafari, J.; Givi, M.K.B.; Barmouz, M. Mechanical and microstructural characterization of Cu/CNT nanocomposite layers fabricated via friction stir processing. International Journal of Advanced Manufacturing Technology 2015, 78 (1–4), 199–209.
   Web of Science ®Google Scholar
• Thankachan, T.; Soorya Prakash, K. Microstructural, mechanical and tribological behavior of aluminum nitride reinforced copper surface composites fabricated through friction stir processing route. Materials Science and Engineering: A 2017, 688, 301–308.
   Web of Science ®Google Scholar
• Thankachan, T.; Soorya Prakash, K.; Kavimani, V. Investigations on the effect of friction stir processing on Cu-BN surface composites. Materials and Manufacturing Processes 2017. doi:10.1080/10426914.2017.1291952
   Web of Science ®Google Scholar
• Pramanik, A.; Basak, A.K.; Islam, M.N. Effect of reinforced particle size on wire EDM of MMCs. International Journal of Machining and Machinability of Materials 2015, 17 (2), 139–149.
   Google Scholar
• Padhi, P.C.; Mahapatra, S.S.; Yadav, S.N.; Tripathy, D.K. Optimization of correlated quality characteristics in wedm process using taguchi approach coupled with principal component analysis. Journal for Manufacturing Science & Production 2013, 13 (3), 199–208.
   Google Scholar
• Zhang, G.; Zhang, Z.; Ming, W.; Guo, J.; Shao, X. The multi-objective optimization of medium-speed WEDM process parameters for machining SKD11 steel by the hybrid method of RSM and NSGA-II. International Journal of Advanced Manufacturing Technology 2014, 70 (9–12), 2097–2109.
   Web of Science ®Google Scholar
• Baraskar, S.S.; Banwait, S.S.; Laroiya, S.C. Multiobjective optimization of electrical discharge machining process using a hybrid method. Materials and Manufacturing Processes 2013, 28 (4), 348–354.
   Web of Science ®Google Scholar
• Dhobe, M.M.; Chopde, I.K.; Gogte, C.L. Investigations on surface characteristics of heat treated tool steel after wire electro-discharge machining. Materials and Manufacturing Processes 2013, 28 (10), 1143–1146.
   Web of Science ®Google Scholar
• Rao, T.B.; Krishna, A.G. Principal component analysis of correlated wedm performance characteristics during machining ZC63/SiCP MMCs. Journal for Manufacturing Science and Production 2014, 14 (1), 1–10.
   Google Scholar
• Rao, T.B.; Krishna, A.G. Selection of optimal process parameters in WEDM while machining Al7075/SiCp metal matrix composites. International Journal of Advanced Manufacturing Technology 2014, 73 (1–4), 299–314.
   Web of Science ®Google Scholar
• Sivaprakasam, P.; Hariharan, P.; Gowri, S. Optimization of micro-wedm process of aluminum matrix composite (A413-B4C): A response surface approach. Materials and Manufacturing Processes 2013, 28 (July 2014), 1340–1347.
   Web of Science ®Google Scholar
• Yue, T.M.; Dai, Y.; Lau, W.S. An examination of Wire Electrical Discharge Machining (WEDM) of Al2O3 particulate reinforced aluminum based composites. Materials and Manufacturing Processes 1996, 11 (3), 341–350.
   Web of Science ®Google Scholar
• Ramakrishnan, R.; Karunamoorthy, L. Modeling and multi-response optimization of Inconel 718 on machining of CNC WEDM process. Journal of Materials Processing Technology 2008, 207 (1–3), 343–349.
   Web of Science ®Google Scholar
• Varun, A.; Venkaiah, N. Simultaneous optimization of WEDM responses using grey relational analysis coupled with genetic algorithm while machining EN 353. International Journal of Advanced Manufacturing Technology 2014, 76 (1–4), 675–690.
   Web of Science ®Google Scholar
• Jangra, K.; Grover, S.; Aggarwal, A. Optimization of multi machining characteristics in WEDM of WC-5.3%Co composite using integrated approach of Taguchi, GRA and entropy method. Frontiers of Mechanical Engineering 2012, 7 (3), 288–299.
   Google Scholar
• Kumar, A.; Kumar, V.; Kumar, J. Semi-empirical model on MRR and overcut in WEDM process of pure titanium using multi-objective desirability approach. Journal of the Brazilian Society of Mechanical Sciences and Engineering 2015, 37 (2), 689–721.
   Web of Science ®Google Scholar
• Saha, A.; Mondal, S.C. Multi-objective optimization in WEDM process of nanostructured hardfacing materials through hybrid techniques. Measurement: Journal of the International Measurement Confederation 2016, 94, 46–59.
   Web of Science ®Google Scholar
• Gauri, S.K.; Chakraborty, S. Multi-response optimisation of WEDM process using principal component analysis. International Journal of Advanced Manufacturing Technology 2009, 41, 741–748.
   Web of Science ®Google Scholar
• Chalisgaonkar, R.; Kumar, J. Optimization of WEDM process of pure titanium with multiple performance characteristics using Taguchi’s DOE approach and utility concept. Frontiers of Mechanical Engineering 2013, 8 (2), 201–214.
   Google Scholar
• Gopal, P.M.; Soorya, P.K.; Jayaraj, S. WEDM of Mg/CRT/BN composites: Effect of materials and machining parameters. Materials and Manufacturing Processes 2017, 1–8. doi:10.1080/10426914.2017.1279316
   Google Scholar
• Bobbili, R.; Madhu, V.; Gogia, A.K. Effect of wire-edm machining parameters on surface roughness and material removal rate of high strength armor steel. Materials and Manufacturing Processes 2013, 28, 364–368.
   Web of Science ®Google Scholar
• Hwa Yan, B.; Chung Tsai, H.; Yuan Huang, F.; Chorng Lee, L. Examination of wire electrical discharge machining of Al2O3p/6061Al composites. International Journal of Machine Tools and Manufacture 2005, 45 (3), 251–259.
   Web of Science ®Google Scholar
• Garg, R.K.; Singh, K.K.; Anish Sachdeva, A.; Sharma, V.S.; Ojha, K.; Singh, S. Review of research work in sinking EDM and WEDM on metal matrix composite materials. The International Journal of Advanced Manufacturing Technology 2010, 50 (5–8), 611–624.
   Web of Science ®Google Scholar
• Satishkumar, D.; Kanthababu, M.; Vajjiravelu, V.; Anburaj, R.; Thirumalai Sundarrajan, N.; Arul, H. Investigation of wire electrical discharge machining characteristics of Al6063/SiCp composites. International Journal of Advanced Manufacturing Technology 2011, 56 (9–12), 975–986.
   Web of Science ®Google Scholar
• Garg, S.K.; Manna, A.; Jain, A. An investigation on machinability of Al/10% ZrO2(P)-metal matrix composite by WEDM and parametric optimization using desirability function approach. Arabian Journal for Science and Engineering 2014, 39 (4), 3251–3270.
   Web of Science ®Google Scholar
• Suresh Kumar, S.; Uthayakumar, M.; Thirumalai Kumaran, S.; Parameswaran, P.; Mohandas, E.; Kempulraj, G.; Ramesh Babu, B.S.; Natarajan, S.A. Parametric optimization of wire electrical discharge machining on aluminium based composites through grey relational analysis. Journal of Manufacturing Processes 2015, 20, 33–39.
   Web of Science ®Google Scholar