Studies on the surface of high-performance alloys machined by micro-EDM

References

• Zhang, W.; Farooq, A.; Wang, W. Generating Silicon Nanoparticles Using Spark Erosion by Flushing High-Pressure Deionized Water. Mater. Manuf. Processes 2016, 31(2), 113–118. DOI:10.1080/10426914.2014.984199
   Web of Science ®Google Scholar
• Tangwarodomnukun, V.; Visonsaya, P.; Buranajant, N.; Opartpunyasarn, M.; Dumkum, C. Experimental Investigation and Optimization of Micro-EDMing Process for Silicon Substrates. Mater. Manuf. Processes 2015, 30(8), 974–982. DOI:10.1080/10426914.2014.973594
   Web of Science ®Google Scholar
• Liu, Q. Y.; Zhang, Q. H.; Zhang, M.; Zhang, J. H. Effect of Crystallographic Anisotropy on Micro EDM Process. Mater. Manuf. Processes 2015, 30(8), 961–967. DOI:10.1080/10426914.2014.962660
   Web of Science ®Google Scholar
• Kuriachen, B.; Mathew, J. Effect of Powder Mixed Dielectric on Material Removal and Surface Modification in Microelectric Discharge Machining of Ti-6Al-4V. Mater. Manuf. Processes 2016, 31(4), 439–446. DOI:10.1080/10426914.2015.1004705
   Web of Science ®Google Scholar
• Moses, M. D.; Jahan, M. P. Micro-EDM Machinability of Difficult-to-Cut Ti-6Al-4V Against Soft Brass. Int. J. Adv. Manuf. Technol. 2015, 81(5–8), 1345–1361. DOI:10.1007/s00170-015-7306-9
   Web of Science ®Google Scholar
• Koyano, T.; Sugata, Y.; Hosokawa, A.; Furumoto, T. Micro Electrical Discharge Machining Using High Electric Resistance Electrodes. Pre. Eng. J. Int. Soc. Pre. Eng. Nano. 2017, 47, 480–486. DOI:10.1016/j.precisioneng.2016.10.003
   Google Scholar
• Natarajan, U.; Suganthi, X. H.; Periyanan, P. R. Modeling and Multiresponse Optimization of Quality Characteristics for the Micro-EDM Drilling Process. Trans. Indian Inst. Met. 2016, 69(9), 1675–1686. DOI:10.1007/s12666-016-0828-5
   Web of Science ®Google Scholar
• Das, A. K.; Kumar, P.; Sethi, A.; Singh, P. K.; Hussain, M. Influence of Process Parameters on the Surface Integrity of Micro-Holes of ss304 Obtained by Micro-EDM. J. Bra. Soc. Mech. Sci. Eng. 2016, 38(7), 2029–2037. DOI:10.1007/s40430-016-0488-8
   Web of Science ®Google Scholar
• D’Urso, G.; Maccarini, G.; Quarto, M.; Ravasio, C. Investigation on Power Discharge in Micro-EDM Stainless Steel Drilling Using Different Electrodes. J. Mech. Sci. Technol. 2015, 29(10), 4341–4349. DOI:10.1007/s12206-015-0932-1
   Web of Science ®Google Scholar
• Al-Ahmari, A.M. A.; Rasheed, M. S.; Mohammed, M. K.; Saleh, T. A Hybrid Machining Process Combining Micro-EDM and Laser Beam Machining of Nickel Titanium-Based Shape Memory Alloy. Mater. Manuf. Processes 2016, 31(4), 447–455. DOI:10.1080/10426914.2015.1019102
   Web of Science ®Google Scholar
• Kibria, G.; Sarkar, B. R.; Pradhan, B. B.; Bhattacharyya, B. Comparative Study of Different Dielectrics for Micro-EDM Performance During Microhole Machining of Ti-6Al-4V Alloy. Int. J. Adv. Manuf. Technol. 2010, 48(5–8), 557–570. DOI:10.1007/s00170-009-2298-y
   Web of Science ®Google Scholar
• Hsue, A.W. J.; Chang, Y. F. Toward Synchronous Hybrid Micro-EDM Grinding of Micro-Holes Using Helical Taper Tools Formed by Ni-Co/Diamond Co-Deposition. J. Mater. Process. Technol. 2016, 234, 368–382. DOI:10.1016/j.jmatprotec.2016.04.009
   Web of Science ®Google Scholar
• Chiou, A. H.; Tsao, C. C.;Hsu, C. Y. A Study of the Machining Characteristics of Micro EDM Milling and its Improvement by -Electrode Coating. Int. J. Adv. Manuf. Technol. 2015, 78(9–12), 1857–1864. DOI:10.1007/s00170-014-6778-3
   Web of Science ®Google Scholar
• Peng, Z. L.; Wang, Z. L.; Dong, Y. H.; Chen, H. Development of a Reversible Machining Method for Fabrication of Microstructures by Using Micro-EDM. J. Mater. Process. Technol. 2010, 210(1), 129–136. DOI:10.1016/j.jmatprotec.2009.08.002
   Web of Science ®Google Scholar
• Kuriachen, B.; Mathew, J. Experimental Investigations into the Effects of Microelectric-Discharge Milling Process Parameters on Processing Ti-6Al-4V. Mater. Manuf. Processes 2015, 30(8), 983–990. DOI:10.1080/10426914.2014.984206
   Web of Science ®Google Scholar
• Bajpai, V.; Mahambare, P.; Singh, R. K. Effect of Thermal and Material Anisotropy of Pyrolytic Carbon in Vibration-Assisted Micro-EDM Process. Mater. Manuf. Processes 2016, 31(14), 1879–1888. DOI:10.1080/10426914.2015.1127937
   Web of Science ®Google Scholar
• Zhang, Z.; Cui, H.; Ding, H.; Guo, L. The Reference Plane by Wavelets for 3D Roughness Evaluation of Micro Wire Electrical Discharge Machining (MWEDM). Harbin Gongcheng Daxue Xuebao/J. Harbin Eng. Univ. 2011, 32(9), 1185–1189. DOI:10.3969/j.issn.1007-7043.2011.09.016
   Google Scholar
• Ramasawmy, H.; Blunt, L. Effect of EDM Process Parameters on 3D Surface Topography. J. Mater. Process. Technol. 2004, 148(2), 155–164. DOI:10.1016/S0924-0136(03)00652-6
   Web of Science ®Google Scholar
• Ma, C.; Mei, X. S.; Yang, J.; Zhao, L.; Shi, H. Thermal Characteristics Analysis and Experimental Study on the High-Speed Spindle System. Int. J. Adv. Manuf. Technol. 2015, 79(1–4), 469–489. DOI:10.1007/s00170-015-6821-z
   Web of Science ®Google Scholar
• Feng, W.; Chu, X.; Hong, Y.; Deng, D. Surface Morphology Analysis Using Fractal Theory in Micro Electrical Discharge Machining. Mater. Trans. 2017, 58(3), 433–441. DOI:10.2320/matertrans.M2016381
   Web of Science ®Google Scholar
• Chu, X.; Feng, W.; Wang, C.; Hong, Y. Analysis of Mechanism Based on Two Types of Pulse Generators in micro-EDM Using Single Pulse Discharge. Int. J. Adv. Manuf. Technol. 2017, 89(9), 3217–3230. DOI:10.1007/s00170-016-9287-8
   Web of Science ®Google Scholar
• Hsue, A.W.-J.; Chang, Y.-F. Toward Synchronous Hybrid Micro-EDM Grinding of Micro-Holes Using Helical Taper Tools Formed by Ni-Co/Diamond Co-Deposition. J. Mater. Process. Technol. 2016, 234, 368–382. DOI:10.1016/j.jmatprotec.2016.04.009
   Web of Science ®Google Scholar
• Chu, X. Y.; Zhu, K.; Wang, C. M.; Hu, Z. P.; Zhang, Y. R. A Study on Plasma Channel Expansion in Micro-EDM. Mater. Manuf. Processes 2016, 31(4), 381–390. DOI:10.1080/10426914.2015.1059445
   Web of Science ®Google Scholar
• Wang, J.; Qian, J.; Ferraris, E.; Reynaerts, D. In-situ Process Monitoring and Adaptive Control for Precision Micro-EDM Cavity Milling. Precis. Eng. J. Int. Soc. Precis. Eng. Nano. 2017, 47, 261–275. DOI:10.1016/j.precisioneng.2016.09.001
   Web of Science ®Google Scholar
• Wang, J.; Yang, F.; Qian, J.; Reynaerts, D. Study of Alternating Current Flow in Micro-EDM Through Real-Time Pulse Counting. J. Mater. Processing Technol. 2016, 231, 179–188. DOI:10.1016/j.jmatprotec.2015.12.010
   Web of Science ®Google Scholar
• Tong, H.; Li, Y.; Zhang, L. On-Machine Process of Rough-and-Finishing Servo Scanning EDM for 3D Micro Cavities. Int. J. Adv. Manuf. Technol. 2016, 82(5–8), 1007–1015. DOI:10.1007/s00170-015-7416-4
   Web of Science ®Google Scholar
• Hoang, K. T.; Yang, S. H. Kerf Analysis and Control in Dry Micro-Wire Electrical Discharge Machining. Int. J. Adv. Manuf. Technol. 2015, 78(9–12), 1803–1812. DOI:10.1007/s00170-014-6764-9
   Web of Science ®Google Scholar
• Saleh, T.; Rasheed, A. N.; Muthalif, A. G. A. Experimental Study on Improving Mu-WEDM and Mu-EDM of Doped Silicon by Temporary Metallic Coating. Int. J. Adv. Manuf. Technol. 2015, 78(9–12), 1651–1663. DOI:10.1007/s00170-014-6732-4
   Web of Science ®Google Scholar
• Kien Trung, H.; Yang, S.-H. A New Approach for Micro-WEDM Control Based on Real-Time Estimation of Material Removal Rate. Int. J. Precis. Eng. Manuf. 2015, 16(2), 241–246. DOI:10.1007/s12541-015-0032-2
   Web of Science ®Google Scholar
• Singh, A. K.; Patowari, P. K.; Deshpande, N. V. Experimental Analysis of Reverse Micro-EDM for Machining Microtool. Mater. Manuf. Processes 2016, 31(4), 530–540. DOI:10.1080/10426914.2015.1070426
   Web of Science ®Google Scholar
• Nirala, C. K.; Saha, P. A New Approach of Tool Wear Monitoring and Compensation in RµEDM Process. Mater. Manuf. Processes 2016, 31(4), 483–494. DOI:10.1080/10426914.2015.1058950
   Web of Science ®Google Scholar
• Liu, Q. Y.; Zhang, Q. H.; Zhu, G.; Wang, K.; Zhang, J. H.; Dong, C. J. Effect of Electrode Size on the Performances of Micro-EDM. Mater. Manuf. Processes 2016, 31(4), 391–396. DOI:10.1080/10426914.2015.1059448
   Web of Science ®Google Scholar
• Zhang, G.; Li, H.; Zhang, Z.; Ming, W.; Wang, N.; Huang, Y. Vibration Modeling and Analysis of Wire During the WEDM Process. Mach. Sci. Technol. 2016, 20(2), 173–186. DOI:10.1080/10910344.2015.1085312
   Web of Science ®Google Scholar
• Andhare, A. B.; Jithin, E. V. Analysis of Wire Vibration in Wire Electric Discharge Machining Process. J. Vib. Eng. Technol. 2015, 3(5), 627–635.
   Web of Science ®Google Scholar