Relationship between cutting process parameters and white layer thickness in orthogonal cutting

References

• Kundrák, J.; Mamalis, A. G.; Markopoulos, A. Finishing of Hardened Boreholes: Grinding or Hard Cutting? Mater. Manuf. Proc. 2004, 19, 979–993. DOI:10.1081/amp-200034480
   Web of Science ®Google Scholar
• Hosseini, S. B.; Thuvander, M.; Klement, U.; Sundell, G.; Ryttberg, K. Atomic-scale investigation of carbon atom migration in surface induced white layers in high-carbon medium chromium (AISI 52100) bearing steel. Acta Mater. 2017, 130, 155–163. DOI:10.1016/j.actamat.2017.03.030
   Web of Science ®Google Scholar
• Gaitonde, V. N.; Karnik, S. R.; Figueira, L.; Davim, J. P. Analysis of Machinability During Hard Turning of Cold Work Tool Steel (Type: AISI D2). Mater. Manuf. Proc. 2009, 24, 1373–1382. DOI:10.1080/10426910902997415
   Web of Science ®Google Scholar
• Kurniawan, D.; Yusof, N. M.; Sharif, S. Hard Machining of Stainless Steel Using Wiper Coated Carbide: Tool Life and Surface Integrity. Mater. Manuf. Proc. 2010, 25, 370–377. DOI:10.1080/10426910903179930
   Web of Science ®Google Scholar
• Guo, Y. B.; Warren, A. W.; Hashimoto, F. The Basic Relationships between Residual Stress, White Layer, and Fatigue Life of Hard Turned and Ground Surfaces in Rolling Contact. CIRP J. Manuf. Sci. Technol. 2010, 2, 129–134. DOI:10.1016/j.cirpj.2009.12.002
   Google Scholar
• Revel, P.; Jouini, N.; Thoquenne, G.; Lefebvre, F. High Precision Hard Turning of AISI 52100 Bearing Steel. Precision Eng. 2016, 43, 24–33. DOI:10.1016/j.precisioneng.2015.06.006
   Web of Science ®Google Scholar
• Lmai, Z. P. Á.; Kundrák, J. The Effect of Technological Conditions of Hard Turning on the Formation of White layer. Mater. Sci. Forum 2016, 862, 1–8. DOI:10.4028/www.scientific.net/msf.862.96
   Google Scholar
• Griffiths, B. J. Mechanisms of White Layer Generation With Reference to Machining and Deformation Processes. J. Tribol. 1987, 109, 525–530. DOI:10.1115/1.3261495
   Web of Science ®Google Scholar
• Ramesh, A.; Melkote, S. N.; Allard, L. F.; Riester, L.; Watkins, T. R. Analysis of White Layers Formed in Hard Turning of AISI 52100 Steel. Mater. Sci. Eng. A 2005, 390, 88–97. DOI:10.1016/j.msea.2004.08.052
   Web of Science ®Google Scholar
• Hosseini, S. B.; Klement, U.; Yao, Y.; Ryttberg, K. Formation Mechanisms of White Layers Induced by Hard Turning of AISI 52100 Steel. Acta Mater. 2015, 89, 258–267. DOI:10.1016/j.actamat.2015.01.075
   Web of Science ®Google Scholar
• Jomaa, W.; Songmene, V.; Bocher, P. An Investigation of Machining-Induced Residual Stresses and Microstructure of Induction-Hardened AISI 4340 Steel. Mater. Manuf. Proc. 2015, 31, 838–844. DOI:10.1080/10426914.2015.1070431
   Web of Science ®Google Scholar
• Akcan, S., Shah, S.; Molyan, S. P.; Chhabra, P. N.; Chandrasekar, S.; Yang, H. T. Y. Formation of White Layers in Steels by Machining and their Characteristics. Metall. Mater. Trans. 2002, 33, 1245–1254. DOI:10.1007/s11661-002-0225-z
   Web of Science ®Google Scholar
• Umbrello, D. Influence of Material Microstructure Changes on Surface Integrity in Hard Machining of AISI 52100 Steel. Int. J. Adv. Manuf. Technol. 2011, 54, 887–898. DOI:10.1007/s00170-010-3003-x
   Web of Science ®Google Scholar
• Umbrello, D.; Caruso, S.; Imbrogno, S. Finite Element Modelling of Microstructural Changes in Dry and Cryogenic Machining AISI 52100 Steel. Mater. Sci. Technol. 2016, 836, 1062–1070. DOI:10.1080/02670836.2015.1104085
   Web of Science ®Google Scholar
• Chou, Y. K.; Song, H. Tool Nose Radius Effects on Finish Hard Turning. J. Mater. Process. Technol. 2004, 148, 259–268. DOI:10.1016/j.jmatprotec.2003.10.029
   Web of Science ®Google Scholar
• Varela, P. I.; Rakurty, C. S.; Balaji, A. K. Surface Integrity in Hard Machining of 300 M Steel: Effect of Cutting-Edge Geometry on Machining Induced Residual Stresses. Proc. CIRP 2014, 13, 288–293. DOI:10.1016/j.procir.2014.04.049
   Google Scholar
• Dogra, M.; Sharma, V. S.; Sachdeva, A.; Suri, N. M. Finish Hard Turning of Continuous and Interrupted Surfaces with Cubic Boron Nitride (CBN) and Coated Carbide Tools. Mater. Manuf. Proc. 2012, 27, 523–530. DOI:10.1080/10426914.2011.593238
   Web of Science ®Google Scholar
• Zhang, X.; Huang, X.; Chen, L.; Leoplod J.; Ding H. Effects of Sequential Cuts on White Layer Formation and Retained Austenite Content in Hard Turning of AISI52100 Steel. J. Manuf. Sci. Eng. 2017, 139, 64502–1–64502–12. DOI:10.1115/1.4035125
   Web of Science ®Google Scholar
• Shi, J., Liu, C. R. On Predicting Chip Morphology and Phase Transformation in Hard Machining. Int. J. Adv. Manuf. Technol. 2006, 27, 645–654. DOI:10.1007/s00170-004-2242-0
   Web of Science ®Google Scholar
• Johnson, G. R.; Cook, W. H. Fracture Characteristics of Three Metals Subjected to Various Strains, Strain Rates, Temperatures and Pressures. Eng. Fracture Mech. 1985, 21, 31–48. DOI:10.1016/0013-7944(85)90052-9
   Web of Science ®Google Scholar
• Zhang, X.; Wu, S.; Wang, H., Liu, C. R. Predicting the Effects of Cutting Parameters and Tool Geometry on Hard Turning Process Using Finite Element Method. J. Manuf. Sci. Eng. 2011, 133, 041010-1–041010-13. DOI:10.1115/1.4004611
   Web of Science ®Google Scholar
• Duan, C.; Kong, W.; Hao, Q.; Zhou, F. Modeling of White Layer Thickness in High Speed Machining of Hardened Steel Based on Phase Transformation Mechanism. Int. J. Adv. Manuf. Technol. 2013, 69, 59–70. DOI:10.1007/s00170-013-5005-y
   Web of Science ®Google Scholar
• Puneet, C.; Valetti, K.; Venu Gopal, A.; Joshi, S. V. CrAlSiN Nanocomposite Thin Films for High-Speed Machining Applications. Mater. Manuf. Proc. 2017. DOI:10.1080/10426914.2017.1303157
   Web of Science ®Google Scholar
• Katna, R.; Singh, K.; Agrawal, N.; Jain, S. Green Manufacturing- Performance of a Biodegradable Cutting Fluid. Mater. Manuf. Proc. 2017. DOI:10.1080/10426914.2017.1328119
   Web of Science ®Google Scholar
• Liao, M.; Sun, H.; Huang, K.; Yang, L. Cutting Performance and Failure Mechanisms of a Pure WC Cutting Tool in Dry Cutting of Cr12Mn5Ni4Mo3Al Stainless Steels and HT200 Grey Cast Iron. Mater. Manuf. Proc. 2017, 1–10. DOI:10.1080/10426914.2017.1279315
   Web of Science ®Google Scholar
• Kountanya, R.; Al-Zkeri, I., Altan, T. Effect of Tool Edge Geometry and Cutting Conditions on Experimental and Simulated Chip Morphology in Orthogonal Hard Turning of 100Cr6 Steel. J. Mater. Process. Technol. 2009, 209, 5068–5076. DOI:10.1016/j.jmatprotec.2009.02.011
   Web of Science ®Google Scholar
• Zhang, X. M.; Chen, L.; Ding, H. Effects of Process Parameters on White Layer Formation and Morphology in Hard Turning of AISI52100 Steel. J. Manuf. Sci. Eng. 2016, 138, 0745021–074502-9. DOI:10.1115/1.4032769
   Web of Science ®Google Scholar
• Zou, L.; Huang, Y.; Zhou, Y. M.; Duan, L. Investigation on Diamond Tool Wear in Ultrasonic Vibration-Assisted Turning Die Steels. Mater. Manuf. Proc. 2017, 1–7. DOI:10.1080/10426914.2017.1291958
   Web of Science ®Google Scholar
• Khan, S. A.; Ahmad, M. A.; Saleem, M. Q., Ghulam, Z.; Qureshi, M. A. M. High-Feed Turning of AISI D2 Tool Steel using Multi-Radii Tool Inserts: Tool Life, Material Removed, and Workpiece Surface Integrity Evaluation. Mater. Manuf. Proc. 2016, 32, 670–677. DOI:10.1080/10426914.2016.1232815
   Web of Science ®Google Scholar
• Chou, Y. K.; Evans, C. J. White Layers and Thermal Modeling of Hard Turned Surfaces. Int. J. Machine Tools Manuf. 1999, 39, 1863–1881. DOI:10.1016/s0890-6955(99)00036-x
   Web of Science ®Google Scholar
• Fratila, D. Numerical and Experimental Approach of Cutting Temperatures to Green Turning of 42CrMo4 Steel. Mater. Manuf. Proc. 2015, 31, 657–666. DOI:10.1080/10426914.2015.1004708
   Web of Science ®Google Scholar
• Sivaiah, P.; Chakradhar, D. Experimental Investigation on Feasibility of Cryogenic, MQL, Wet and Dry Machining Environments in Turning of 17–4 PH Stainless Steel. Mater. Manuf. Proc. 2017. DOI:10.1080/10910344.2017.1337129
   Web of Science ®Google Scholar
• Kundrák, J.; Gácsi, Z.; Gyáni, K.; Bana, V.; Tomolya, G. X-ray Diffraction Investigation of White Layer Development in Hard-Turned Surfaces. Int. J. Adv. Manuf. Technol. 2012, 62, 457–469. DOI:10.1007/s00170-011-3811-7
   Web of Science ®Google Scholar
• Attanasio, A.; Umbrello, D.; Cappellini, C.; Rotella, G.; Saoubi, R. M. Tool Wear Effects on White and Dark Layer Formation in Hard Turning of AISI 52100 Steel. Wear 2012, 286–287, 98–107. DOI:10.1016/j.wear.2011.07.001
   Web of Science ®Google Scholar
• Denkena, B.; Grove, T.; Maiss, O. Influence of the Cutting Edge Radius on Surface Integrity in Hard Turning of Roller Bearing Inner Rings. Prod. Eng. 2015, 9, 299–305. DOI:10.1007/s11740-015-0615-x
   Google Scholar
• Zhou, J. M.; Walter, H.; Andersson, M.; Stahl, J. E. Effect of Chamfer Angle on Wear of PCBN Cutting Tool. Int. J. Machine Tools Manuf. 2003, 43, 301–305. DOI:10.1016/s0890-6955(02)00214-6
   Web of Science ®Google Scholar
• Ng, E. G.; Aspinwall, D. K.; Brazil, D.; Monaghan, J. Modelling of Temperature and Forces when Orthogonally Machining Hardened Steel. Int. J. Machine Tools Manuf. 1999, 39, 885–903. DOI:10.1016/s0890-6955(98)00077-7
   Web of Science ®Google Scholar
• Tanaka, R.; Morishita, H.; Lin, Y.; Hosokawa, A.; Ueda, T.; Furumoto, T. Cutting Tool Edge Temperature in Finish Hard Turning of Case Hardened Steel. Key Eng. Mater. 2009, 407–409, 538–541. DOI:10.4028/www.scientific.net/kem.407-409.538
   Google Scholar
• Rowe, W. B.; Black, S. C. E.; Mills, B.; Morgan, M. N.; Qi, H. S. Grinding Temperatures and Energy Partitioning. Proc. R. Soc. A London 1997, 453, 1083–1104. DOI:10.1098/rspa.1997.0061
   Google Scholar
• Habak, M. Etude de l’influence de la microstructure et des paramètres de coupe sur le comportement en tournage dur de l’acier à roulement 100Cr6. Ph.D. Thesis ENSAM, CER d’Angers, France, 2006.
   Google Scholar