References
- Beri, N.; Maheshwari, S.; Sharma, C.; Kumar, A. Technological Advancement in Electrical Discharge Machining with Powder Metallurgy Processed Electrodes: A Review. Mater. Manuf. Processes. 2010, 25(10), 1186–1197. DOI: https://doi.org/10.1080/10426914.2010.512647.
- Mohd Abbas, N.; Solomon, D. G.; Md.Bahari, F. A Review on Current Research Trends in Electrical Discharge Machining. Int. J. Mach. Tools. Manuf. 2007, 47, 1214–1228. DOI: https://doi.org/10.1016/j.ijmachtools.2006.08.026.
- Beri, N.; Maheshwari, S.; Sharma, C.; Kumar, A. Performance Evaluation of Powder Metallurgy Electrode in Electrical Discharge Machining of AISI D2 Steel Using Taguchi Method. Int. J. Mech, Aerosp., Ind., Mechatronic. Manuf. Eng. 2008, 2, 225–229.
- Khanra, A. K.; Sarkar, B. R.; Bhattacharya, B.; Pathak, L. C.; Godkhindi, M. M. Performance of ZrB2-Cu Composite as an EDM Electrode. J. Mater. Process. Technol. 2007, 183(1), 122–126. DOI: https://doi.org/10.1016/j.jmatprotec.2006.09.034.
- El-Taweel, T. A. Multi-Response Optimization of EDM with Al–Cu–Si–TiC P/M Composite Electrode. Int. J. Adv. Manuf. Technol. 2009, 44, 100–113. DOI: https://doi.org/10.1007/s00170-008-1825-6.
- Li, L.; Wong, Y. S.; Fuh, J. Y. H.; Lu, L. EDM Performance of TiC/Copper-Based Sintered Electrodes. Mater. Des. 2001, 22, 669–678. DOI: https://doi.org/10.1016/s0261-3069(01)00010-3.
- Ahmed, A. Deposition and Analysis of Composite Coating on Aluminium Using Ti-B4C Powder Metallurgy Tools in EDM. Mater. Manuf. Processes. 2016, 31(4), 467–474. DOI: https://doi.org/10.1080/10426914.2015.1025967.
- Singh, G. A.; Kumar, S. Surface Roughness and Microhardness Evaluation for EDM with Cu-Mn Powder Metallurgy Tool. Mater. Manuf. Processes. 2016, 31(4), 514–521. DOI: https://doi.org/10.1080/10426914.2015.1070412.
- Das, A.; Prakash, M. J. Experimental Investigation on Surface Modification of Aluminum By Electric Discharge Coating Process Using Tic/Cu Green Compact Tool-Electrode. Mach. Sci. Technol.: Int. J. 2012, 16(4), 601–623. DOI: https://doi.org/10.1080/10910344.2012.731951.
- Singh, B.; Kumar, J.; Kumar, S. Optimization and Surface Modification in Electrical Discharge Machining of AA 6061/SiCp Composite Using Cu–W Electrode. Proc. Inst. Mech. Eng., Part L 2015, 0(13), 1–17. DOI: https://doi.org/10.1177/1464420715596544.
- Marafona, J.; Wykes, C. A New Method of Optimising Material Removal Rate Using EDM with Copper-Tungstan Electrodes. Int. J. Mach. Tool. Manuf. 2000, 40, 153–164. DOI: https://doi.org/10.1016/s0890-6955(99)00062-0.
- Patowari, P. K.; Mishra, U. K.; Saha, P.; Mishra, P. K. Surface Integrity of C-40 Steel Processed with WC-Cu Powder Metallurgy Green Compact Tools in EDM. Mater. Manuf. Processes. 2011, 26(5), 668–676. DOI: https://doi.org/10.1080/10426914.2010.512652.
- Kumar, P.; Parkash, R. Experimental Investigation and Optimization of EDM Process Parameters for Machining of Aluminum Boron Carbide (Al–B4C) Composite. Mach. Sci. Technol. 2016, 20(2), 330–348. DOI: https://doi.org/10.1080/10910344.2016.1168931.
- Balasubramaniana, P.; Senthilvelanb, T. Optimization of Machining Parameters in EDM Process Using Cast and Sintered Copper Electrodes. Procedia Mater. Sci. 2014, 6, 1292–1302.
- Dwivedi, A. P.; Choudhury, S. K. Effect of Tool Rotation on MRR, TWR, and Surface Integrity of AISI-D3 Steel Using the Rotary EDM Process. Mater. Manuf. Processes. 2016, 31(14), 1844–1852. DOI: https://doi.org/10.1080/10426914.2016.1140198.
- Baraskar, S. S.; Banwait, S. S.; Laroiya, S. C. Multiobjective Optimization of Electrical Discharge Machining Process Using a Hybrid Method. Mater. Manuf. Processes. 2012, 28(4), 348–354. DOI: https://doi.org/10.1080/10426914.2012.700152.
- Majumder, A.; Das, P. K.; Majumder, A.; Debnath, M. An Approach to Optimize the EDM Process Parameters Using Desirability-Based Multi-Objective PSO. Prod. Manuf. Res. 2014, 2(1), 228–240.
- Ko-Ta, Chiang. Modeling and Analysis of the Effects of Machining Parameters on the Performance Characteristics in the EDM Process of Al2O3+TiC Mixed Ceramic. Int. J. Adv. Manuf. Technol. 2008, 37, 523–533. DOI: https://doi.org/10.1007/s00170-007-1002-3.
- Torres, A.; Puertas, I.; Luis, C. J. Modelling of Surface Finish, Electrode Wear and Material Removal Rate in Electrical Discharge Machining of Hard-to-Machine Alloys. Precis. Eng. 2015, 40, 33–45. DOI: https://doi.org/10.1016/j.precisioneng.2014.10.001.
- Patel, K. M.; Pandey, P. M.; Rao, P. V. Determination of an Optimum Parametric Combination Using a Surface Roughness Prediction Model for EDM of Al2O3/SiCw/TiC Ceramic Composite. Mater. Manuf. Processes. 2009, 24(6), 675–682. DOI: https://doi.org/10.1080/10426910902769319.
- Caydas, U.; Hascalik, A. Modeling and Analysis of Electrode Wear and White Layer Thickness in Die-Sinking EDM Process Through Response Surface Methodology. Int. J. Adv. Manuf. Technol. 2008, 38, 1148–1156.
- Mohal, S.; Kumar, H. Parametric Optimization of Multiwalled Carbon Nanotube-Assisted Electric Discharge Machining of Al-10%SiCp Metal Matrix Composite by Response Surface Methodology. Mater. Manuf. Processes. 2016, 32(3), 263–273. DOI: https://doi.org/10.1080/10426914.2016.1140196.
- Kao, J. Y.; Tsao, C. C.; Wang, S. S.; Hsu, C. Y. Optimization of the EDM Parameters on Machining Ti–6Al–4V with Multiple Quality Characteristics. Int. J. Adv. Manuf. Technol. 2010, 47, 395–402. DOI: https://doi.org/10.1007/s00170-009-2208-3.
- Guo, Y; Wang, L; Zhang, G; Hou, P. Multi-Response Optimization of the Electrical Discharge Machining of Insulating Zirconia. Mater. Manuf. Processes. 2016, 32(3), 294–301. DOI: https://doi.org/10.1080/10426914.2016.1176180.
- Somashekhar, K. P.; Ramachandran, N.; Mathew, J. Optimization of Material Removal Rate in Micro-EDM Using Artificial Neural Network and Genetic Algorithms. Mater. Manuf. Processes. 2010, 25(6), 467–475. DOI: https://doi.org/10.1080/10426910903365760.
- Singh, B.; Kumar, J.; Kumar, S. Influences of Process Parameters on MRR Improvement in Simple and Powder-Mixed EDM of AA6061/10%SiC Composite. Mater. Manuf. Processes. 2015, 30(3), 303–312. DOI: https://doi.org/10.1080/10426914.2014.930888.