Experimental investigations into transient roughness reduction in ball-end magneto-rheological finishing process

References

• Maan, S.; Singh, G.; Singh, A. K. Nano-Surface-Finishing of Permanent Mold Punch Using Magnetorheological Fluid-Based Finishing Processes. Mater. Manuf. Processes 2017, 32(9), 1004–1010.
   Web of Science ®Google Scholar
• Nagdeve, L.; Jain, V. K.; Ramkumar, J. Differential Finishing of Freeform Surfaces (Knee Joint) Using R-MRAFF Process and Negative Replica of Workpiece as a Fixture. Mach. Sci. Technol. 2017, 22(4), 1–25.
   Web of Science ®Google Scholar
• Sambharia, J.; Mali, H. S. Characterization and Optimization of Rheological Parameters of Polymer Abrasive Gel for Abrasive Flow Machining. J. Mater. Sci. Surf. Eng. 2017, 5(3), 549–555.
   Google Scholar
• Kordonski, W.; Shorey, A. Magnetorheological (MR) Jet Finishing Technology. J. Intel. Mater. Syst. Struct. 2007, 18, 1127–1130.
   Web of Science ®Google Scholar
• Kordonski, W. I.; Jacobs, S. D. Magnetorheological Finishing. Int. J. Mod. Phys. 1996, B 10, 2857–2865.
   Web of Science ®Google Scholar
• Singh, A. K.; Jha, S.; Pandey, P. M. Magnetorheological Ball End Finishing Process. Mater. Manuf. Processes 2012, 27(4), 389–394.
   Web of Science ®Google Scholar
• Singh, A. K.; Jha, S.; Pandey, P. M. Nanofinishing of a Typical 3D Ferromagnetic Workpiece Using Ball End Magnetorheological Finishing Process. Int. J. Mach. Tools Manuf. 2012, 63, 21–31.
   Web of Science ®Google Scholar
• Singh, A. K.; Jha, S.; Pandey, P. M. Nanofinishing of Fused Silica Glass Using Ball-End Magneto Rheological Finishing Tool. Mater. Manuf. Processes 2012, 27(10), 1139–1144.
   Web of Science ®Google Scholar
• Saraswathamma, K.; Jha, S.; Rao, P. V. Experimental Investigation into Ball End Magneto Rheological Finishing of Silicon. Precis. Eng. 2015, 42, 218–223.
   Web of Science ®Google Scholar
• Khan, D. A.; Alam, Z.; Jha, S. Nanofinishing of Copper Using Ball End Magnetorheological Finishing (BEMRF) Process, Proceedings of the ASME 2016 International Mechanical Engineering Congress and Exposition.
   Google Scholar
• Skalski, P.; Kalita, K. Role of Magnetorheological Fluids and Elastomers in Today’s World. Acta Mech. Autom. 2017, 11(4), 267–274.
   Web of Science ®Google Scholar
• Alam, Z.; Jha, S. Modeling of Surface Roughness in Ball End Magnetorheological Finishing (BEMRF) Process. Wear 2017, 374–375C, 54–62.
   Web of Science ®Google Scholar
• Khan, D. A.; Kumar, J.; Jha, S. Magneto-Rheological Nano-Finishing of Polycarbonate. Int. J. Precis. Technol. 2016, 6/2, 89–100.
   Google Scholar
• Niranjan, M.; Jha, S.; Kotnala, R. K. Ball End Magneto Rheological Finishing using Bi-Disperse Magneto Rheological Polishing Fluid. Mater. Manuf. Processes 2014, 29/4, 487–492.
   Web of Science ®Google Scholar
• Singh, A. K.; Jha, S.; Pandey, P. M. Performance Analysis of Ball End Magneto Rheological Finishing Process with MR Polishing Fluid. Mater. Manuf. Processes 2015, 30/12, 1482–1489.
   Web of Science ®Google Scholar
• Barman, A.; Das, M. Simulation and Experimental Investigation of Finishing Forces in Magnetic Field Assisted Finishing Process. Mater. Manuf. Processes 2018, 33(11), 1–10.
   Web of Science ®Google Scholar
• Iqbal, F.; Jha, S. Nanofinishing of Free Form Surfaces Using BEMRF. In Nanofinishing Science and Technology: Basic and Advanced Finishing and Polishing Processes; Jain, V. K.; Ed.; CRC Press: Florida, 2017.
   Google Scholar
• Seghiour, A.; Seghier, T.; Zegnini, B.; Georgoulas, G. Multi-Class Classification Approach for the Diagnosis of Broken Rotor Bars Based on Air-Gap Magnetic Flux Density. Electrotehn. Electron. Autom. (EEA) 2017, 65(2), 31–39.
   Google Scholar
• Pathak, S.; Jain, N. K. Critical Review of Electrochemical Honing: Sustainable and Alternative Gear Finishing Process. Part 2: Effects of Various Process Parameters on Surface Characteristics and Material Removal Rate. Trans. IMF 2017, 95(5), 241–254.
   Web of Science ®Google Scholar
• Sarkar, M.; Jain, V. K. Nanofinishing of Freeform Surfaces Using Abrasive Flow Finishing Process. Proc. Inst. Mech. Eng. Part B 2017, 231(9), 1501–1515.
   Web of Science ®Google Scholar
• Iqbal, F.; Alam, Z.; Khan, D. A.; Jha, S. Localized Finishing by Ball End Magnetorheological Finishing Process Using Integrated Confocal Sensor for In-Situ Surface Roughness Measurement, In 39th International MATADOR Conference on Advanced Manufacturing, 5–7 July 2017, University of Manchester, UK.
   Google Scholar