Experimental investigation and optimization of PAC parameters on Monel 400™ superalloy

References

• Uthayakumar, M.; Adam Khan, M.; Thirumalai Kumaran, S.; Slota, A.; Zajac, J. Machinability of nickel-based superalloy by abrasive water jet machining. Mater. Manuf. Processes 2016, 31(13), 1733–1739. doi:10.1080/10426914.2015.1103859
   Web of Science ®Google Scholar
• Kaya, E.; Akyüz, B. Effects of cutting parameters on machinability characteristics of Ni-based superalloys: a review. Open Eng. 2017, 7, 330–342. doi:10.1515/eng-2017-0037
   Web of Science ®Google Scholar
• Selvakumar, G.; Thiruppathi Kuttalingam, K. G.; Selvaraj, M.; Manohar, J. Enhancing die corner accuracy using path modification strategy in wire electrical discharge machining of Monel 400. Proc. Inst. Mech Eng, Part B: J. Eng. Manuf. 2018, 232(2), 207–216. doi:10.1177/0954406216679436
   Web of Science ®Google Scholar
• Yildirim, C. V.; Kivak, T.; Sarikaya, M.; Erzincanli, F. Determination of MQL parameters contributing to sustainable machining in the milling of nickel-base superalloy waspaloy. Arabian J. Sci. Eng. 2017, 42(11), 4667–4681. doi:10.1007/s13369-017-2594-z
   Web of Science ®Google Scholar
• Wu, X.; Chen, J. The temperature process analysis and control on laser-assisted milling of nickel-based superalloy. Int. J. Adv. Manuf. Technol. 2018, 98, 223–235. doi:10.1007/s00170-018-1809-0
   Web of Science ®Google Scholar
• Popli, D.; Gupta, M. Experimental investigation of tool wear and machining rate in rotary ultrasonic machining of nickel alloy. Mach. Sci. Technol. 2017. doi:10.1080/10910344.2017.1365896
   Web of Science ®Google Scholar
• Mathan Kumar, P.; Sivakumar, K.; Jayakumar, N. Multi-objective optimization and analysis of copper–titanium diboride electrode in EDM of Monel 400™ alloy. Mater. Manuf. Processes 2017. doi:10.1080/10426914.2017.1415439
   Web of Science ®Google Scholar
• Jothimurugan, R.; Amirthagadeswaran, K. S. Performance of additive mixed kerosene–servotherm in electrical discharge machining of Monel 400™. Mater. Manuf. Processes 2015, 31(4), 432–438. doi:10.1080/10426914.2014.984202
   Web of Science ®Google Scholar
• Arun Kumar, N. E.; Suresh Babu, A. Influence of input parameters on the near-dry WEDM of Monel alloy. Mater. Manuf. Processes 2017, 33(1), 85–92. doi:10.1080/10426914.2017.1279297
   Web of Science ®Google Scholar
• Patil, D. H.; Mudigonda, S. Investigation on effect of grain orientation in photochemical machining of Monel 400. Mater. Manuf. Processes 2017, 32(16), 1831–1837. doi:10.1080/10426914.2017.1291953
   Web of Science ®Google Scholar
• Ramakrishnan, H.; Balasundaram, R.; Ganesh, N.; Karthikeyan, N. Experimental investigation of cut quality characteristics on SS321 using plasma arc cutting. J. Braz. Soc. Mech. Sci. Eng. 2018, 40(2), 60. doi:10.1007/s40430-018-0997-8
   Web of Science ®Google Scholar
• Bini, R.; Colosimo, B. M.; Kutlu, A. E.; Monno, M. Experimental study of the features of the kerf generated by a 200 A high tolerance plasma arc cutting system. J. Mater. Process. Technol. 2008, 196(1–3), 345–355. doi:10.1016/j.jmatprotec.2007.05.061
   Web of Science ®Google Scholar
• Adalarasan, R.; Santhanakumar, M.; Rajmohan, M. Application of grey Taguchi-based response surface methodology (GT-RSM) for optimizing the plasma arc cutting parameters of 304L stainless steel. Int. J. Adv. Manuf. Technol. 2015, 78(5–8), 1161–1170. doi:10.1016/j.matdes.2005.02.014
   Web of Science ®Google Scholar
• Gullu, A.; Atici, U. Investigation of the effects of plasma arc parameters on the structure variation of AISI 304 and St 52 steels. Mater. Des. 2006, 27(10), 1157–1162. doi:10.1016/j.matdes.2005.02.014
   Web of Science ®Google Scholar
• Abdulnasser, B.; Bhuvenesh, R. Plasma arc cutting optimization parameters for aluminum alloy with two thickness by using Taguchi method. AIP Conf. Proc. 2016, 1756, 60002. doi:10.1063/1.4958776
   Google Scholar
• Kim, S.-I.; Kim, M.-H. Evaluation of cutting characterization in plasma cutting of thick steel ship plates. Int. J. Precis Eng. Manuf. 2013, 14(9), 1571–1575. doi:10.1007/s12541-013-0212-x
   Web of Science ®Google Scholar
• Iosub, A.; Nagit, G.; Negoescu, F. Plasma cutting of composite materials. Int. J. Mater. Form. 2008, 1(S1), 1347–1350. doi:10.1007/s12289-008-0113-1
   Google Scholar
• Chamarthi, S.; Srinivasa Reddy, N.; Elipey, M. K.; Ramana Reddy, D. V. Investigation analysis of plasma arc cutting parameters on the unevenness surface of Hardox-400 material. Procedia Eng. 2013, 64, 854–861. doi:10.1016/j.proeng.2013.09.161
   Google Scholar
• Maity, K. P.; Bagal, D. K. Effect of process parameters on cut quality of stainless steel of plasma arc cutting using hybrid approach. Int. J. Adv. Manuf. Technol. 2015, 78(1–4), 161–175. doi:10.1007/s00170-014-6552-6
   Web of Science ®Google Scholar
• Özek, C.; U., Ç.; E., Ü. A fuzzy model for predicting surface roughness in plasma arc cutting of AISI 4140 steel. Mater. Manuf. Processes 2012, 27(1), 95–102. doi:10.1080/10426914.2011.551952
   Web of Science ®Google Scholar
• Kechagias J.; Pappas M.; Karagiannis S.; Petropoulos G.; Iakovakis V.; Maropoulos S. An ANN approach on the optimization of the cutting parameters during CNC plasma arc cutting. In Proceedings of the ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis, Istanbul, Turkey, July 12–14; 2010; 643–649. doi:10.1115/ESDA2010-24225.
   Google Scholar
• Gariboldi, E.; Previtali, B. High tolerance plasma arc cutting of commercially pure titanium. J. Mater. Process. Technol. 2005, 160(1), 77–89. doi:10.1016/j.jmatprotec.2004.04.366
   Web of Science ®Google Scholar
• Tamilarasan, A.; Rajamani, D. Multi-response optimization of Nd: YAG laser cutting parameters of Ti-6Al-4V superalloy sheet. J. Mech. Sci. Technol. 2017, 31(2), 813–821. doi:10.1007/s12206-017-0133-1
   Web of Science ®Google Scholar
• Chithirai Pon Selvan, M.; Mohana Sundara Raju, N. Effects of process parameters on surface roughness in abrasive waterjet cutting of aluminium. Front. Mech. Eng. 2012, 7(4), 439–444. doi:10.1007/s11465-012-0337-0
   Google Scholar
• Kondayya, D.; Gopala Krishna, A. An integrated evolutionary approach for modelling and optimization of laser beam cutting process. Int. J. Adv. Manuf. Technol. 2013, 65(1–4), 259–274. doi:10.1007/s00170-012-4165-5
   Web of Science ®Google Scholar
• Cai, X.; Qin, S.; Li, J.; An, Q.; Chen, M. Experimental investigation on surface integrity of end milling nickel-based alloy––Inconel 718. Mach. Sci. Technol. 2014, 18(1), 31–46. doi:10.1080/10910344.2014.863627
   Web of Science ®Google Scholar
• Sinha., M. K.; Setti, D.; Ghosh, S.; Venkateswara Rao, P. An investigation on surface burn during grinding of Inconel 718. J. Manuf. Process 2016, 21, 124–133. doi:10.1016/j.jmapro.2015.12.004
   Web of Science ®Google Scholar
• Imran, M.; Mativenga, P. T.; Gholinia, A.; Withers, P. J. Assessment of surface integrity of Ni superalloy after electrical-discharge, laser and mechanical micro-drilling processes. Int. J. Adv. Manuf. Technol. 2015, 79(5–8), 1303–1311. doi:10.1007/s00170-015-6909-5
   Web of Science ®Google Scholar