Influence of materials and machining parameters on WEDM of Al/AlCoCrFeNiMo_0.5 MMC

References

• Yan, B. H.; Wang, C. C. Machinability of SiC Particle Reinforced Aluminum Alloy Composite Material. J. Jpn. Inst. Light Met. 1993, 43(4), 187–192. DOI: 10.2464/jilm.43.187.
   Google Scholar
• Garg, M. P.; Sharma, A. Examination of Accuracy Aspect in Machining of ZrSiO4p/6063 Aluminium MMC Using CNC Wire Electrical Discharge Machining. Compos. Commun. 2017, 6, 6–10. DOI: 10.1016/j.coco.2017.07.002.
   Web of Science ®Google Scholar
• Kumar, V.; Jangra, K. K.; Kumar, V.; Sharma, N. WEDM of Nickel Based Aerospace Alloy: Optimization of Process Parameters and Modeling. Int. J. Interact. Des. Manuf. 2017, 11(4), 917–929. DOI: 10.1007/s12008-016-0298-3.
   Google Scholar
• Arun Kumar, N. E.; Suresh Babu, A. Influence of Input Parameters in Enhancing the Machinability of Monel Alloy Using Near- Dry WEDM. Mater. Manuf. Processes. 2018, 33(1), 85–92. DOI: 10.1080/10426914.2017.1279297.
   Web of Science ®Google Scholar
• Garg, R. K.; Singh, K. K.; Sachdeva, A.; Sharma, V. S.; Ojha, K.; Singh, S. Review of Research Work in Sinking EDM and WEDM on Metal Matrix Composite Materials. Int. J. Adv. Manuf. Technol. 2010, 50, 611–624. DOI: 10.1007/s00170-010-2534-5.
   Web of Science ®Google Scholar
• Satishkumar, D.; Kanthababu, M.; Vajjiravelu, V.; Anburaj, R.; Thirumalai Sundarrajan, N.; Arul, H. Investigation of Wire Electrical Discharge Machining Characteristics of Al6063/SiCp Composites. Int. J. Adv. Manuf. Technol. 2011, 56, 975–986. DOI: 10.1007/s00170-011-3242-5.
   Web of Science ®Google Scholar
• Patil, N. G.; Brahmankar, P. K. Some Studies into Wire Electro-Discharge Machining of Alumina Particulate-Reinforced Aluminum Matrix Composites. Int. J. Adv. Manuf. Technol. 2010, 48, 537–555. DOI: 10.1007/s00170-009-2291-5.
   Web of Science ®Google Scholar
• Suresh Kuma, S.; Uthayakumar, M.; Thirumalai Kumaran, S.; Parameswaran, P.; Mohandas, E.; Kempulraj, G.; Ramesh Babu, B. S.; Natarajan, S. A. Parametric Optimization of Wire Electrical Discharge Machining on Aluminium Based Composites through Grey Relational Analysis. J. Manuf. Processes. 2015, 20(1), 33–39. DOI: 10.1016/j.jmapro.2015.09.011.
   Google Scholar
• Sanjeev Garg, K.; Manna, A.; Jain, A. An Experimental Investigation for Optimization of WEDM Parameters during Machining of Fabricated Al/ZrO2(p)-MMC. Arab. J. Sci. Eng. 2013, 38, 3471–3483. DOI: 10.1007/s13369-013-0657-3.
   Web of Science ®Google Scholar
• Lal, S.; Kumar, S.; Khan, Z. A.; Siddiquee, A. N. An Investigation on Effects of Wire Electrical Discharge Machining Parameters on Surface Roughness of Newly Developed Hybrid Metal Matrix Composite. Proc. Inst. Mech. Eng. B. 2014, 228(5), 653–662. DOI: 10.1177/0954405413506703.
   Web of Science ®Google Scholar
• Thankachan, T.; Soorya Prakash, K.; Loganathan, M. WEDM Process Parameter Optimization of FSPed Copper-BN Composites. Mater. Manuf. Processes. 2018, 33(3), 350–358. DOI: 10.1080/10426914.2017.1339311.
   Web of Science ®Google Scholar
• Gopal, P. M.; Soorya Prakash, K.; Jayaraj, S. WEDM of Mg/CRT/BN Composites: Effect of Materials and Machining Parameters. Mater. Manuf. Processes. 2018, 33(1), 77–84. DOI: 10.1080/10426914.2017.1279316.
   Web of Science ®Google Scholar
• Soorya Prakash, K.; Sathiya Moorthy, R.; Gopal, P. M.; Kavimani, V. Effect of Reinforcement, Compact Pressure and Hard Ceramic Coating on Aluminium Rock Dust Composite Performance. Int. J. Refract. Met. Hard. Mater. 2016, 54, 223–229. DOI: 10.1016/j.ijrmhm.2015.07.037.
   Web of Science ®Google Scholar
• Gopal, P. M.; Soorya Prakash, K. Minimization of Cutting Force, Temperature and Surface Roughness through GRA, TOPSIS and Taguchi Techniques in End Milling of Mg Hybrid MMC. Measurement. 2018, 116, 178–192. DOI: 10.1016/j.measurement.2017.11.011.
   Web of Science ®Google Scholar
• Gopal, P. M.; Soorya Prakash, K. Wire Electric Discharge Machining of Silica Rich E-Waste CRT and BN Reinforced Hybrid Magnesium MMC. Silicon. 2018. DOI: 10.1007/s12633-018-9951-8.
   Web of Science ®Google Scholar
• Chaubey, S. K.; Jain, N. K. Investigations on Microgeometry of Meso Bevel and Meso Helical Gears Manufactured by WEDM Process. Int. J. Adv. Manuf. Technol. 2017, 93(9–12), 4217–4231. DOI: 10.1007/s00170-017-0884-y.
   Web of Science ®Google Scholar
• Pramanik, A.; Littlefair, G. Wire EDM Mechanism of MMCs with the Variation of Reinforced Particle Size. Mater. Manuf. Processes. 2016, 31(13), 1700–1708. DOI: 10.1080/10426914.2015.1117621.
   Web of Science ®Google Scholar
• Ravi Kumar, K.; Sreebalaji, V. S.; Ganesan, V. Analysis of Kerf Width and Cutting Speed Characteristics of Aluminium/Tungsten Carbide Composites. J. Mineral Metal Mater. Eng. 2015, 1, 47–56.
   Google Scholar