Material removal in grinding sapphire wafers with brazed–diamond pellet plates

References

• Wang, L.; Hu, Z.; Yu, Y.; Xu, X. Evaluation of Double-Sided Planetary Grinding Using Diamond Wheels for Sapphire Substrates. Crystals. 2018, 8(7), 262. DOI: 10.3390/cryst8070262.
   Web of Science ®Google Scholar
• Wang, J. B.; Li, Z.; Gao, H.; Shu, D.; Xiao, P. Process Optimization of Lapping Sapphire Substrate with Fixed Diamond Abrasive Pad. Key Eng. Mater. 2016, 693, 1090–1097. DOI: 10.4028/www.scientific.net/KEM.693.1090.
   Google Scholar
• Chae, J. H.; Lim, H. Y.; Cho, B. R. Optical Properties Evaluated according to the Different Thickness Sapphire under the Same Polishing Conditions. Mater. Sci. Forum. 2018, 922, 80–85. DOI: 10.4028/www.scientific.net/MSF.922.80.
   Google Scholar
• Lee, H. S.; Lee, H. J.; Jeong, H. B.; Choi, S. H.; Lee, Y. K.; Jeong, M. K.; Jeong, H. D. Macroscopic and Microscopic Investigation on Chemical Mechanical Polishing of Sapphire Wafer. J. Nanosci. Nanotechnol. 2012, 12(2), 1256–1259. DOI: 10.1166/jnn. 2012.4679
   PubMed Web of Science ®Google Scholar
• Kim, D.; Kim, H.; Lee, S.; Jeong, H. Effect of Initial Deflection of Diamond Wire on Thickness Variation of Sapphire Wafer in Multi-Wire Saw. Int. J. Prec. Eng. Manuf. Technol. 2015, 2(2), 117–121. DOI: 10.1007/s40684-015-0015-x.
   Web of Science ®Google Scholar
• Pawar, P.; Ballav, R.; Kumar, A. Machining Process of Sapphire: An Overview. Int. J. Modern Manuf. Technol. 2017, 9(1), 47–72.
   Google Scholar
• Yuan, Z.; Cheng, K.; He, Y.; Zhang, M. Investigation on Smoothing Silicon Carbide Wafer with a Combined Method of Mechanical Lapping and Photocatalysis Assisted Chemical Mechanical Polishing. Proceedings of the ASME 2018 International Manufacturing Science and Engineering Conference MSEC 2018, College Station, Texas, USA, June 18–22, 2018.
   Google Scholar
• Pal, R. K.; Garg, H.; Sarepaka, R. G. V.; Karar, V. Experimental Investigation of Material Removal and Surface Roughness during Optical Glass Polishing. Mater. Manuf. Processes. 2000, 15(4), 503–520. DOI: 10.1080/10426914.2015.1103867.
   Google Scholar
• Mamalis, G.; Hidasi, B.; Dudas, Z.; Branis, A. S. On the Lapping Mechanism of Sintered Al2O3 Ceramic Surfaces Using Diamonds. Mater. Manuf. Processes. 2016, 31(12), 1613–1620. DOI: 10.1080/10426910008913002.
   Google Scholar
• Katoh, T.; Kang, H. G.; Paik, U.; Park, J. G. Effects of Abrasive Morphology and Surfactant Concentration on Polishing Rate of Ceria Slurry. Jpn, J. Appl. Phys. 2003, 42, 1150–1153. DOI: 10.1143/JJAP.42.1150.
   Web of Science ®Google Scholar
• Kasuga, H.; Ohmori, H.; Mizutani, M.; Nemoto, A. Mirror Surface Grinding of Sapphire by Coarse Grain Size Diamond Wheels. Int. J. Nanomanuf. 2014, 10(3), 309–318. DOI: 10.1504/IJNM.2014.060801.
   Google Scholar
• Lee, T.; Lee, S.; Jo, W.; Jeong, H.; Kim, H. Study on the Lapping Characteristics of Sapphire Wafer by Using a Fixed Abrasive Plate. Tribol. Lubric. 2016, 32(2), 44–49. DOI: 10.9725/kstle.2016.32.2.44.
   Google Scholar
• Gagliardi, J. J.; Kim, D.; Sokol, J. J.; Zazzera, L. A.; Romero, V. D.; Atkinson, M. R.; Nabulsi, F.; Zhang, H. A Case for 2-Body Material Removal in Prime LED Sapphire Substrate Lapping and Polishing. J. Manuf. Process. 2013, 15(3), 348–354. DOI: 10.1016/j.jmapro.2012.11.005.
   Web of Science ®Google Scholar
• Kim, H. M.; Manivannan, R.; Moon, D. J.; Xiong, H.; Park, J. G. Evaluation of Double Sided Lapping Using a Fixed Abrasive Pad for Sapphire Substrates. Wear. 2013, 302(1–2), 1340–1344. DOI: 10.1016/j.wear.2012.11.075.
   Web of Science ®Google Scholar
• Wu, H. W.; Chen, Y. Y.; Horng, J. H. The Analysis of Three-Body Contact Temperature under the Different Third Particle Size, Density, and Value of Friction. Micromachines. 2017, 8(10), 302. DOI: 10.3390/mi8100302.
   PubMed Web of Science ®Google Scholar
• Zuo, D.; Sun, Y.; Zhao, Y.; Zhu, Y. Basic Research on Polishing with Ice Bonded Nanoabrasive Pad. J. Vac. Sci. Technol. B: Microelectron. Nanometer Struct. Process., Meas., Phenom. 2009, 27(3), 1514–1519. DOI: 10.1116/1.3125272.
   Web of Science ®Google Scholar
• Fang, C.; Liu, C.; Zhao, Z.; Lin, Y.; Hu, Z.; Xu, X. Study on Geometrical Patterns of Textured Fixed-Abrasive Pads in Sapphire Lapping Based on Trajectory Analysis. Prec. Eng. 2018, 53, 169–178. DOI: 10.1016/j.precisioneng.2018.03.008.
   Web of Science ®Google Scholar
• Yang, N.; Li, Z. Q.; Zong, W. J.; Sun, T. Complex Trajectory Planning for Lapping of Diamond Cutting Tool. Key Eng. Mater. 2014, 625, 453–457. DOI: 10.4028/www.scientific.net/KEM.625.453.
   Google Scholar
• Fang, C.; Zhao, Z.; Hu, Z. Pattern Optimization for Phyllotactic Fixed Abrasive Pads Based on the Trajectory Method. IEEE Trans. Semicond. Manuf. 2017, 30(1), 78–85. DOI: 10.1109/TSM.2016.2637058.
   Web of Science ®Google Scholar
• Hu, Z.; Fang, C.; Deng, W.; Zhao, Z.; Lin, Y.; Xu, X. Speed Ratio Optimization for Ceramic Lapping with Fixed Diamond Pellets. Int. J. Adv. Manuf. Technol. 2017, 90(9–12), 3159–3169. DOI: 10.1007/s00170-016-9644-7.
   Web of Science ®Google Scholar
• Dong, Z.; Cheng, H.; Tam, H. Y. Investigation on Removal Features of Multidistribution Fixed Abrasive Diamond Pellets Used in the Polishing of SiC Mirrors. Appl. Opt. 2012, 51(35), 8373–8382. DOI: 10.1364/AO.51.008373.
   PubMed Web of Science ®Google Scholar
• Wang, X.; Zhang, X. Theoretical Study on Removal Rate and Surface Roughness in Grinding a RB-SiC Mirror with a Fixed Abrasive. Appl. Opt. 2009, 48(5), 904–910. DOI: 10.1364/AO.48.000904.
   PubMed Web of Science ®Google Scholar
• Ebina, Y.; Hang, W.; Zhou, L. B.; Shimizu, J.; Onuki, T.; Ojima, H.; Tashiro, Y. Study on Grinding Processing of Sapphire Wafer. Adv. Mater. Res. 2012, 565, 22–27. DOI: 10.4028/www.scientific.net/AMR.565.22.
   Google Scholar
• Wang, L.; Hu, Z.; Fang, C.; Yu, Y.; Xu, X. Study on the Double-Sided Grinding of Sapphire Substrates with the Trajectory Method. Prec. Eng. 2018, 51, 308–318. DOI: 10.1016/j.precisioneng.2017.09.001.
   Web of Science ®Google Scholar
• Gao, S.; Kang, R. K.; Dong, Z. G.; Zhang, B.; Wang, Z. G.; Integrity, S. Removal Mechanism in Grinding Sapphire Wafers with Noval Vitrified Bond Diamond Plates. Mater. Manuf. Processes. 2017, 32(2), 121–126. DOI: 10.1080/10426914.2016.1140194.
   Web of Science ®Google Scholar
• Huang, G.; Zhang, M.; Xu, X. The Effects of Temperature Curves on the Diamond/Ni-Cr Interfacial Properties in High-Frequency Induction Brazing. Int. J. Abra. Technol. 2017, 8(2), 133–146. DOI: 10.1504/IJAT.2017.089290.
   Google Scholar
• Su, H.; Dai, J.; Ding, W.; Zhang, K.; Xu, W. Experimental Research on Performance of Monolayer Brazed Diamond Wheel through a New Precise Dressing Method—Plate Wheel Dressing. Int. J. Adv. Manuf. Technol. 2016, 87(9–12), 3249–3259. DOI: 10.1007/s00170-016-8646-9.
   Web of Science ®Google Scholar
• Sun, B. J.; Xiao, B. Mechanical Properties of Diamond Grinding Discs Brazed in a Continuous-Belt Tunnel Furnace or Vacuum Furnace. Int. J. Adv. Manuf. Technol. 2017, 89(5–8), 1379–1386. DOI: 10.1007/s00170-016-9195-y.
   Web of Science ®Google Scholar
• Bifano, T. G.; Dow, T. A.; Scattergood, R. O. Ductile-Regime Grinding: A New Technology for Machining Brittle Materials. J. Eng. Ind. 1991, 113(2), 184–189. DOI: 10.1115/1.2899676.
   Google Scholar
• Gavas, M.; Karacan, İ.; Kaya, E. A Novel Method to Improve Surface Quality in Cylindrical Grinding. Exp. Tech. 2011, 35(1), 26–32. DOI: 10.1111/j.1747-1567.2009. 00575.x
   Web of Science ®Google Scholar
• Zhang, B.; Fu, Y. Grinding of Brittle Materials with Brazed Diamond Grinding Wheel. Int. J. Adv. Manuf. Technol. 2013, 67, 2845–2852. DOI: 10.1007/s00170-012-4697-8.
   Web of Science ®Google Scholar
• Li, S. S.; Xu, J. H.; Xiao, B.; Yan, M. H.; Fu, Y. C.; Xu, H. J. Performance of Brazed Diamond Wheel in Grinding Cemented Carbide. Mater. Sci. Forum. 2006, 532, 381–384. DOI: 10.4028/www.scientific.net/MSF.532-533.381.
   Google Scholar
• Chen, J. Y.; Shen, J. Y.; Huang, H.; Xu, X. P. Grinding Characteristics in High Speed Grinding of Engineering Ceramics with Brazed Diamond Wheels. J. Mater. Process. Technol. 2010, 210, 899–906. DOI: 10.1016/j.jmatprotec.2010.02.002.
   Web of Science ®Google Scholar
• Xu, L.; Xu, Q.; Rao, J.; Han, Y. Experimental Grinding of Cubic Zirconia with Grooved and Non-Grooved Diamond Discs. Int. J. Adv. Manuf. Technol. 2018, 97, 3087–3097. DOI: 10.1007/s00170-018-2135-2.
   Web of Science ®Google Scholar
• Preston, F. W.;. The Theory and Design of Plate Glass Polishing Machines. J. Soc. Glass Tech. 1927, 11, 214–256.
   Google Scholar