Experimental study on mechanical drilling of carbon/epoxy composite-Ti6Al4V stacks

References

• Impero, F.; Dix, M.; Squillace, A.; Prisco, U.; Palumbo, B.; Tagliaferri, F. A Comparison between Wet and Cryogenic Drilling of CFRP/Ti Stacks. Mater. Manuf. Process. 2018, 33, 1354–1360. DOI: 10.1080/10426914.2018.1453162.
   Web of Science ®Google Scholar
• Xu, J.; Mkaddem, A.; El Mansori, M. Recent Advances in Drilling Hybrid FRP/Ti Composite: A State-of-the-Art Review. Compos. Struct. 2016, 135, 316–338. DOI: 10.1016/j.compstruct.2015.09.028.
   Web of Science ®Google Scholar
• Alberdi, A.; Artaza, T.; Suárez, A.; Rivero, A.; Girot, F. An Experimental Study on Abrasive Waterjet Cutting of CFRP/Ti6Al4V Stacks for Drilling Operations. Int. J. Adv. Manuf. Technol. 2016, 86, 691–704. DOI: 10.1007/s00170-015-8192-x.
   Web of Science ®Google Scholar
• Pecat, O.; Brinksmeier, E. Tool Wear Analyses in Low Frequency Vibration Assisted Drilling of CFRP/Ti6Al4V Stack Material. Procedia CIRP 2014, 14, 142–147. DOI: 10.1016/j.procir.2014.03.050.
   Google Scholar
• Ghassemieh, E.;. Performance and Wear of Coated Carbide Drill in Machining of Carbon Fibre Reinforced Composite/Titanium Stack. Int. J. Mater. Prod. Technol. 2012, 43, 165–183. DOI: 10.1504/IJMPT.2012.047682.
   Web of Science ®Google Scholar
• Park, K. H.; Kwon, P.; Kim, D. Wear Characteristic on BAM Coated Carbide Tool in Drilling of Composite/Titanium Stack. Int. J. Precis. Eng. Manuf. 2012, 13, 1073–1076. DOI: 10.1007/s12541-012-0140-1.
   Web of Science ®Google Scholar
• Isbilir, O.; Ghassemieh, E. Comparative Study of Tool Life and Hole Quality in Drilling of CFRP/Titanium Stack Using Coated Carbide Drill. Mach. Sci. Technol. 2013, 17, 380–409. DOI: 10.1080/10910344.2013.806098.
   Web of Science ®Google Scholar
• Rawat, S.; Attia, H. Wear Mechanisms and Tool Life Management of WC-Co Drills during Dry High Speed Drilling of Woven Carbon Fibre Composites. Wear 2009, 267, 1022–1030. DOI: 10.1016/j.wear.2009.01.031.
   Web of Science ®Google Scholar
• Wang, B.; Gao, H.; Wen, Q.; Maoqing, W.; Zhang, S. Influence of Cutting Heat on Quality of Drilling of Carbon/Epoxy Composites. Mater. Manuf. Process. 2012, 27, 968–972. DOI: 10.1080/10426914.2011.610079.
   Web of Science ®Google Scholar
• Raj, D. S.; Karunamoorthy, L. Study of the Effect of Tool Wear on Hole Quality in Drilling Cfrp to Select a Suitable Drill for Multi-Criteria Hole Quality. Mater. Manuf. Process. 2016, 31, 587–592. DOI: 10.1080/10426914.2015.1004713.
   Web of Science ®Google Scholar
• Babu, J.; Sunny, T.; Paul, N. A.; Mohan, K. P.; Philip, J.; Davim, J. P. Assessment of Delamination in Composite Materials: A Review. Proc. Inst. Mech. Eng. Pt B-J. Eng. Manuf. 2016, 230, 1990–2003. DOI: 10.1177/0954405415619343.
   Web of Science ®Google Scholar
• Che, D.; Saxena, I.; Han, P.; Guo, P.; Ehmann, K. F. Machining of Carbon Fiber Reinforced Plastics/Polymers: A Literature Review. J. Manuf. Sci. Eng.-Trans. ASME 2014, 136, 034001. DOI: 10.1115/1.4026526.
   Web of Science ®Google Scholar
• Krishnaraj, V.; Prabukarthi, A.; Ramanathan, A.; Elanghovan, N.; Senthil Kumar, M.; Zitoune, R.; Davim, J. Optimization of Machining Parameters at High Speed Drilling of Carbon Fiber Reinforced Plastic (CFRP) Laminates. Compos. Pt. B - Eng. 2012, 43, 1791–1799. DOI: 10.1016/j.compositesb.2012.01.007.
   Web of Science ®Google Scholar
• Manikandan, N.; Arulkirubakaran, D.; Palanisamy, D.; Raju, R. Influence of Wire-EDM Textured Conventional Tungsten Carbide Inserts in Machining of Aerospace Materials (Ti–6Al–4V Alloy). Mater. Manuf. Process. 2019, 34, 103–111.
   Web of Science ®Google Scholar
• Nguyen, D.; Yin, S.; Nguyen, N. T.; Phung, X. S.; Duc, L. A. A New Method for Online Monitoring when Grinding Ti-6Al-4V Alloy. Mater. Manuf. Process. 2019, 34, 39–53.
   Web of Science ®Google Scholar
• Liu, Z.; An, Q.; Xu, J.; Chen, M.; Han, S. Wear Performance of (nc-AlTiN)/(a-Si3N4) Coating and (nc-AlCrN)/(a-Si3N4) Coating in High-Speed Machining of Titanium Alloys under Dry and Minimum Quantity Lubrication (MQL) Conditions. Wear 2013, 305, 249–259. DOI: 10.1016/j.wear.2013.02.001.
   Web of Science ®Google Scholar
• Zeilmann, R. P.; Weingaertner, W. L. Analysis of Temperature during Drilling of Ti6Al4V with Minimal Quantity of Lubricant. J. Mater. Process. Technol. 2006, 179, 124–127. DOI: 10.1016/j.jmatprotec.2006.03.077.
   Web of Science ®Google Scholar
• Li, R.; Shih, A. J. Spiral Point Drill Temperature and Stress in High-Throughput Drilling of Titanium. Int. J. Mach. Tools Manuf. 2007, 47, 2005–2017. DOI: 10.1016/j.ijmachtools.2007.01.014.
   Web of Science ®Google Scholar
• Prabukarthi, A.; Krishnaraj, V.; Santhosh, M.; Senthilkumar, M.; Zitoune, R. Optimisation and Tool Life Study in Drilling of Titanium (Ti-6Al-4V) Alloy. Int. J. Mach. Mach. Mater. 2013, 13, 138–157.
   Google Scholar
• Park, K. H.; Beal, A.; Kim, D.; Kwon, P.; Lantrip, J. Tool Wear in Drilling of Composite/Titanium Stacks Using Carbide and Polycrystalline Diamond Tools. Wear 2011, 271, 2826–2835. DOI: 10.1016/j.wear.2011.05.038.
   Web of Science ®Google Scholar
• Kuo, C. L.; Soo, S. L.; Aspinwall, D. K.; Bradley, S.; Thomas, W.; M’Saoubi, R.; Pearson, D.; Leahy, W. Tool Wear and Hole Quality when Single-Shot Drilling of Metallic-Composite Stacks with Diamond-Coated Tools. Proc. Inst. Mech. Eng. Pt B-J. Eng. Manuf. 2014, 228, 1314–1322. DOI: 10.1177/0954405413517388.
   Web of Science ®Google Scholar
• SenthilKumar, M.; Prabukarthi, A.; Krishnaraj, V. Study on Tool Wear and Chip Formation during Drilling Carbon Fiber Reinforced Polymer (CFRP)/Titanium Alloy (Ti6Al4V) Stacks. Procedia Eng. 2013, 64, 582–592. DOI: 10.1016/j.proeng.2013.09.133.
   Google Scholar
• Prabukarthi, A.; Senthilkumar, M.; Krishnaraj, V. Study on Drilling of CFRP/Ti6Al4V Stack with Modified Twist Drills Using Acoustic Emission Technique. Steel Compos. Struct. 2016, 21, 573–588. DOI: 10.12989/scs.2016.21.3.573.
   Web of Science ®Google Scholar
• Cong, W.; Pei, Z.; Treadwell, C. Preliminary Study on Rotary Ultrasonic Machining of CFRP/Ti Stacks. Ultrasonics 2014, 54, 1594–1602. DOI: 10.1016/j.ultras.2014.03.012.
   PubMed Web of Science ®Google Scholar
• Sanda, A.; Arriola, I.; Navas, V. G.; Bengoetxea, I.; Gonzalo, O. Ultrasonically Assisted Drilling of Carbon Fibre Reinforced Plastics and Ti6Al4V. J. Manuf. Process. 2016, 22, 169–176. DOI: 10.1016/j.jmapro.2016.03.003.
   Web of Science ®Google Scholar
• Wang, X.; Kwon, P. Y.; Sturtevant, C.; Kim, D.; Lantrip, J. Tool Wear of Coated Drills in Drilling CFRP. J. Manuf. Process. 2013, 15, 127–135. DOI: 10.1016/j.jmapro.2012.09.019.
   Web of Science ®Google Scholar
• Gaugel, S.; Sripathy, P.; Haeger, A.; Meinhard, D.; Bernthaler, T.; Lissek, F.; Kaufeld, M.; Knoblauch, V.; Schneider, G. A Comparative Study on Tool Wear and Laminate Damage in Drilling of Carbon-Fiber Reinforced Polymers (CFRP). Compos. Struct. 2016, 155, 173–183. DOI: 10.1016/j.compstruct.2016.08.004.
   Web of Science ®Google Scholar
• Faraz, A.; Biermann, D.; Weinert, K. Cutting Edge Rounding: An Innovative Tool Wear Criterion in Drilling CFRP Composite Laminates. Int. J. Mach. Tools Manuf. 2009, 49, 1185–1196. DOI: 10.1016/j.ijmachtools.2009.08.002.
   Web of Science ®Google Scholar
• Chen, W. C.;. Some Experimental Investigations in the Drilling of Carbon Fiber-Reinforced Plastic (CFRP) Composite Laminates. Int. J. Mach. Tools Manuf. 1997, 37, 1097–1108. DOI: 10.1016/S0890-6955(96)00095-8.
   Web of Science ®Google Scholar
• Palanikumar, K.; Prakash, S.; Shanmugam, K. Evaluation of Delamination in Drilling GFRP Composites. Mater. Manuf. Process. 2008, 23, 858–864. DOI: 10.1080/10426910802385026.
   Web of Science ®Google Scholar