Micro-forming analysis of ultra-thin brass foil

References

• Razali, A. R.; Qin, Y. A Review on Micro-Manufacturing, Micro-Forming and Their Key Issues. Procedia Eng. 2013, 53, 665–672. DOI: 10.1016/j.proeng.2013.02.086.
   Google Scholar
• Jiang, Z.; Zhao, J.; Xie, H. Microforming Technology – Theory, Simulation and Practice; Elsevier, 2017.
   Google Scholar
• Kim, G.-Y.; Jun, N.; Koç, M. Modeling of the Size Effects on the Behavior of Metals in Microscale Deformation Processes. J. Manuf. Sci. Eng. 2007, 129(3), 470. DOI: 10.1115/1.2714582.
   Web of Science ®Google Scholar
• Leu, D.-K.;. Modeling of Size Effect on Tensile Flow Stress of Sheet Metal in Microforming. J. Manuf. Sci. Eng. 2009, 131(1), 011001–011008. DOI: 10.1115/1.3039520.
   Web of Science ®Google Scholar
• Cao, J.; Krishnan, N.; Wang, Z.; Hongsheng, L.; Liu, W. K.; Swanson, A. Microforming: Experimental Investigation of the Extrusion Process for Micropins and Its Numerical Simulation Using RKEM. J. Manuf. Sci. Eng. 2005, 126(4), 642–652. DOI: 10.1115/1.1813468.
   Web of Science ®Google Scholar
• Yin, H.; Jiang, Z.; Xie, H.; Jia, F.; Wang, X.; Zhou, C. Micro Forming of Metallic Composites. Procedia Manuf. 2018, 15, 1429–1436. DOI: 10.1016/j.promfg.2018.07.338.
   Google Scholar
• Zhang, R.; Shao, Z.; Lin, J. A Review on Modelling Techniques for Formability Prediction of Sheet Metal Forming. Int. J. Light. Mater. Manuf. 2018, 1(3), 115–125. DOI: 10.1016/j.ijlmm.2018.06.003.
   Google Scholar
• Hattalli, V. L.; Shivshankar, R. Srivatsa, Sheet Metal Forming Processes – Recent Technological Advances. Mater. Today Proc. 2018, 5(1), 2564–2574. DOI: 10.1016/j.matpr.2017.11.040.
   Google Scholar
• Xu, Z. T.; Peng, L. F.; Fu, M. W.; Lai, X. M. Size Effect Affected Formability of Sheet Metals in Micro/Meso Scale Plastic Deformation: Experiment and Modeling. Int. J. Plast. 2015, 68, 34–54. DOI: 10.1016/j.ijplas.2014.11.002.
   Web of Science ®Google Scholar
• Saotome, Y.; Yasuda, K.; Kaga, H. Microdeep Drawability of Very Thin Sheet Steels. J. Mater. Process. Technol. 2001, 113(1–3), 641–647. DOI: 10.1016/S0924-0136(01)00626-4.
   Web of Science ®Google Scholar
• Michael Abspoel, M. E.; Scholting, J. M.; Droog, M. A New Method For Predicting Forming Limit Curves From Mechanical Properties. J. Mater. Process. Technol. 2013, 213(5), 759–769. DOI: 10.1016/j.jmatprotec.2012.11.022.
   Web of Science ®Google Scholar
• Bleck, W.; Deng, Z.; Papamantellos, K.; Gusek, C. O. A Comparative Study of the Forming Limit Diagram Models for Sheet Steels. J. Mater. Process. Technol. 1998, 83(1–3), 223–230. DOI: 10.1016/S0924-0136(98)00066-1.
   Web of Science ®Google Scholar
• Ahmadi, S.; Eivani, A. R.; Akbarzadeh, A. Experimental and Analytical Studies on the Prediction of Forming Limit Diagrams. Comput. Mater. Sci. 2009, 44(4), 1252–1257. DOI: 10.1016/j.commatsci.2008.08.008.
   Web of Science ®Google Scholar
• Shinge, V. R.; Dabade, U. A. Experimental Investigation on Forming Limit Diagram of Mild Carbon Steel Sheet. Procedia Manuf. 2018, 20, 141–146. DOI: 10.1016/j.promfg.2018.02.020.
   Google Scholar
• Moshksar, M. M.; Mansorzadeh, S. Determination of the Forming Limit Diagram for Al 3105 Sheet. J. Mater. Process. Technol. 2003, 141(1), 138–142. DOI: 10.1016/S0924-0136(03)00262-0.
   Web of Science ®Google Scholar
• Sudarsan, C.; Banker, K. H.; Hazra, S.; Bhagat, R.; Panda, S. K. Experimental Investigations on Forming Limit Diagram of Ultra Thin SS 304 Steel: Effect of Circular Grid Size, Sheet Orientation, Punch Size and Deformation Speed. Adv. Mater. Process. Technol. 2018, 5(1), 25–38. DOI: 10.1080/2374068X.2018.1510679.
   Google Scholar
• Marciniak, Z.; Kuczyński, K. Limit Strains in the Processes of Stretch-Forming Sheet Metal. Int. J. Of Mech. Sci. 1967, 9(9), 609–620. DOI: 10.1016/0020-7403(67)90066-5.
   Google Scholar
• Sahu, J.; Mishra, S. Limit Dome Height Test of Very Thin Brass Sheet considering the Scaling Effect. J. Phys. Conf. Ser. 2016, 734(3), 1–4. DOI: 10.1088/1742-6596/734/3/032114.
   Google Scholar
• Chen, C.-H.; Gau, J.-T.; Lee, R.-S. An Experimental and Analytical Study on the Limit Drawing Ratio of Stainless Steel 304 Foils for Microsheet Forming. Mater. Manuf. Processes. 2009, 24(12), 1256–1265. DOI: 10.1080/10426910903129786.
   Web of Science ®Google Scholar
• Ravishankar, C.; Krishna Kumar, R. Finite Element Simulation of Sheet Stretched over a Hemispherical Punch: A Parametric Study. Mech. Adv. Mat. Struct. 2012, 19(8), 663–675. DOI: 10.1080/15376494.2011.563406.
   Web of Science ®Google Scholar
• Sheng, Z.; Mallick, P. Predicting Forming Limit Curve Using a New Ductile Failure Criterion. SAE Technical Paper. 2017, 2017-01-0312. DOI: 10.4271/2017-01-0312.
   Google Scholar
• Vaz, M., Jr; De Santi, N., Jr; Verran, G. O. Ductile Fracture Prediction in Metal Forming Processes. Int. J. Mechatron. Manuf. Syst. 2008, 232–242. DOI: 10.1504/IJMMS.2008.020508.
   Google Scholar
• Zhu, J.; Huang, S.; Liu, W.; Jianhua, H.; Zou, X. Forming Limit Prediction of Sheet Metals by M-K Model with Various Yield Functions. Int. J. Microstruct. Mater. Prop. 2017, 12(5/6), 348–362. DOI: 10.1504/IJMMP.2017.092163.
   Google Scholar
• Woo, M.-A.; Song, W.-J.; Kang, B.-S.; Kim, J. Acquisition and Evaluation of Theoretical Forming Limit Diagram of Al 6061-T6 in Electrohydraulic Forming Process. Metals. 2019, 9(401), 1–15. DOI: 10.3390/met9040401.
   Google Scholar
• Bayat, H. R.; Sarkar, S.; Anantharamaiah, B.; Italiano, F.; Bach, A.; Tharani, S.; Wulfinghoff, S.; Reese, S. Modeling of Forming Limit Bands for Strain-Based Failure-Analysis of Ultra-High-Strength Steels. Metals. 2018, 8(631), 1–25. DOI: 10.3390/met8080631.
   Google Scholar
• Nikhare, C. P.; Vorisek, E.; Nolan, J. R.; Roth, J. T. Forming Limit Differences in Hemispherical Dome and Biaxial Test during Equibiaxial Tension on Cruciform. J. Eng. Mater. Technol. 2017, 139(4), 041011–1:9. DOI: 10.1115/1.4037020.
   Web of Science ®Google Scholar
• Kolasangiani, K.; Shariati, M.; Farhangdoost, K. Prediction of Forming Limit Curves (FLD, MSFLD and FLSD) and Necking Time for SS304L Sheet Using Finite Element Method and Ductile Fracture Criteria. J. Comput. Appl. Res. Mech. Eng. 2015, 4(2), 121–132.
   Google Scholar