Influence of cutting conditions on surface characteristics in micro-milling of Ti-6Al-7Nb alloy

References

• Mitsuo, N. Recent research and development in titanium alloys for biomedical applications and healthcare goods. Sci. Technol. Adv. Mater. 2003, 4, 445–454. DOI: 10.1016/j.stam.2003.09.002.
   Web of Science ®Google Scholar
• Yoshiki, O. Introduction, Bioscience and Bioengineering of Titanium Materials, 2nd ed.; Elsevier: (USA), 2010.
   Google Scholar
• Luo, Y.; Yang, L.; Tian, M. Application of biomedical-grade titanium alloys in trabecular bone and artificial joints. Biomater. Med. Tribol. 2013, 181–216.
   Google Scholar
• Bai, Y.; Deng, Y.; Zheng, Y.; Zhang, R.; Lv, Y.; Zhao, Q.; Wei, S. Characterization, corrosion behaviour, cellular response and in vivo bone tissue compatibility of titanium–niobium alloy with low Young’s modulus. Mater. Sci. Eng. 2016, 59, 565–576. DOI: 10.1016/j.msec.2015.10.062.
   Google Scholar
• Gepreel, M. A. H.; Niinomi, M. Biocompatibility of Ti-alloys for long-term implantation. J. Mech. Behavi. Biomed .Mater. 2013, 20, 407–415. DOI: 10.1016/j.jmbbm.2012.11.014.
   PubMed Web of Science ®Google Scholar
• De, N. L.; Altomare, L.; Del Curto, B.; Cigada, A.; Draghi, L. Electrochemical Surface Modifications of Titanium and Titanium Alloys for Biomedical Applications, Coatings for Biomedical Applications; Wood head pub.: Sawston, Cambridge, 2012; pp 106–142.
   Google Scholar
• Shalabi, M. M.; Gortemaker, A.; Van’t Hof, M. A.; Jansen, J. A.; Creugers, N. H. J. Implant surface roughness and bone healing: a systematic review. J. Dent. Res. 2006, 85, 496–670. DOI: 10.1177/154405910608500603.
   PubMed Web of Science ®Google Scholar
• Ulutan, D.; Ozel, T. Machining induced surface integrity in titanium and nickel alloys: a review. Int. J. Mach. Tools Manuf. 2011, 51, 250–280. DOI: 10.1016/j.ijmachtools.2010.11.003.
   Web of Science ®Google Scholar
• Lauro, C. H.; Ribeiro Filho, S. L.; Brandao, L. C.; Davim, J. P. Analysis of behaviour biocompatible titanium alloy (ti-6al-7nb) in the micro-cutting. Meas. 2016, 93, 529–540. DOI: 10.1016/j.measurement.2016.07.059.
   Web of Science ®Google Scholar
• Leo Kumar, S. P.; Avinash, D. Experimental biocompatibility investigations of Ti-6Al-7Nb alloy in micro-milling operations in terms of corrosion behaviour and surface characteristics study. J. Braz. Soc. Mech. Sci. Eng. 2019, 41(364), 1–11.
   Web of Science ®Google Scholar
• Bandapalli, C.; Singh, K. K.; Sutaria, B. M.; Bhatt, D. V. Experimental investigation of machinability parameters in high-speed micro-end milling of titanium (grade-2). Int.J. Adv. Manuf. Technol. 2016, 85, 2139–2153. DOI: 10.1007/s00170-015-7443-1.
   Web of Science ®Google Scholar
• Hassanpour, H.; Sadeghi, M. H.; Rezaei, H.; Rasti, A. Experimental study of cutting force, microhardness, surface roughness, and burr size on micromilling of Ti6al4v in minimum quantity lubrication. Mater. Manuf. Process. 2016, 31, 1654–1662. DOI: 10.1080/10426914.2015.1117629.
   Web of Science ®Google Scholar
• Ramesh, S.; Karunamoorthy, L.; Palanikumar, K. Surface roughness analysis in machining of titanium alloy. Mater. Manuf. Process. 2008, 23, 174–181. DOI: 10.1080/10426910701774700.
   Web of Science ®Google Scholar
• Niknam, S. A.; Khettabi, R.; Songmene, V. Machinability and machining of titanium alloys: a review. I.J. Mate. Form. Machi Tribol. 2014, 1–30.
   Google Scholar
• Schueler, G. M.; Engmann, J.; Marx, T.; Haberland, R.; Aurich, J. C.; Burr formation and surface characteristics in micro-end milling of titanium alloys. I. Conf. on Burrs; Burrs - analysis, control and removal, Kaiserslautern, (Germany), 2010,129–138.
   Google Scholar
• Thanongsak, T.; Tugrul, O. Multi objective process optimization for micro-end milling of Ti–6Al–4V titanium alloy. Int. J. Adv. Manuf. Technol. 2012, 63, 903–914. DOI: 10.1007/s00170-012-3980-z.
   Web of Science ®Google Scholar
• Ravi, L.; Vivek, B.; K S, R.; S S, J. Characterization and modeling of burr formation in micro-end milling. Preci. Eng. 2011, 35, 625–637. DOI: 10.1016/j.precisioneng.2011.04.007.
   Web of Science ®Google Scholar
• Leo Kumar, S. P. Experimental investigations and empirical modeling for optimization of surface roughness and machining time parameters in micro end milling using genetic algorithm. Meas. 2018, 124, 386–394. DOI: 10.1016/j.measurement.2018.04.056.
   Web of Science ®Google Scholar
• Montgomery, D. C. Design and Analysis of Experiments; John Wiley & Sons: USA, 2008.
   Google Scholar
• Box, G. E. P.; Draper, N. R. Empirical Model Building and Response Surfaces; John Wiley and Sons: New York, 1987.
   Google Scholar
• Myers, R. H.; Montgomery, D. C.; Anderson-cook, C. M. Response Surface Methodology, 3rd ed.; Wiley Series In Probability And Statistics, John Wiley & Sons: USA, 2009.
   Google Scholar
• Mamoun, F.; Mohamed, L.; Omar, A.; Leila, D.; Ahlem, T.; Hadda, R.; Alain, I. Tribological behavior of Ti-6Al-4V and Ti-6Al-7Nb alloys for total hip prosthesis. Adv. Tribol. 2014, 1–13.
   Google Scholar
• Chakradhar, B.; Kundan, K. S.; Bharatkumar, M. S.; Dhananjay, V. B. Experimental investigation of top burr formation in high-speed micro-end milling of titanium alloy. Mach. Sci. Technol. 2018, 22, 1–23.
   Web of Science ®Google Scholar
• Choudhury, I. A.; Lawal, S. A. Burr formation in machining processes: a review. Compre. Mater. Proces. 2014, 11, 283–294.
   Google Scholar