A new approach for nanofinishing of complicated-surfaces using rotational abrasive finishing process

References

• Hashimoto, F.; Yamaguchi, H.; Krajnik, P.; Wegener, K.; Chaudhari, R.; Hoffmeister, H.-W.; Kuster, F. Abrasive Fine-Finishing Technology. CIRP Ann. 2016, 65(2), 597–620. DOI: 10.1016/J.CIRP.2016.06.003.
   Web of Science ®Google Scholar
• Iqbal, F.; Jha, S. Experimental Investigations into Transient Roughness Reduction in Ball-end Magneto-rheological Finishing Process. Mater. Manuf. Process. 2018. DOI: 10.1080/10426914.2018.1512131.
   Web of Science ®Google Scholar
• Komanduri, R.; Lucca, D. A.; Tani, Y. Technological Advances in Fine Abrasive Processes. CIRP Ann. 1997, 46(2), 545–596. DOI: 10.1016/S0007-8506(07)60880-4.
   Google Scholar
• Saraeian., P.; SoleimaniMehr, H.; Moradi., B.; Tavakoli., H.; Alrahmani, O. K. Study of Magnetic Abrasive Finishing for AISI321 Stainless Steel. Mater. Manuf. Process. 2016, 31(15), 2023–2029. DOI: 10.1080/10426914.2016.1140195.
   Web of Science ®Google Scholar
• Yamaguchi, H.; Shinmura, T. Internal Finishing Process for Alumina Ceramic Components by a Magnetic Field Assisted Finishing Process. Precis. Eng. 2004, 28(2), 135–142. DOI: 10.1016/J.PRECISIONENG.2003.07.001.
   Web of Science ®Google Scholar
• Yamaguchi, H.; Shinmura, T. Study of an Internal Magnetic Abrasive Finishing Using a Pole Rotation System: Discussion of the Characteristic Abrasive Behavior. Precis. Eng. 2000, 24(3), 237–244. DOI: 10.1016/S0141-6359(00)00037-4.
   Web of Science ®Google Scholar
• Judal., K. B.; Yadava., V.; Pathak, D. Experimental Investigation of Vibration AssistedCylindrical–Magnetic Abrasive Finishing of Aluminum Workpiece. Mater. Manuf. Process. 2013, 28(11), 1196–1202. DOI: 10.1080/10426914.2013.811725.
   Web of Science ®Google Scholar
• Jain, V. K.;. Magnetic Field Assisted Abrasive Based Micro-/Nano-Finishing. J. Mater. Process. Technol. 2009, 209(20), 6022–6038. DOI: 10.1016/J.JMATPROTEC.2009.08.015.
   Web of Science ®Google Scholar
• Rhoades, L.;. Abrasive Flow Machining: A Case Study. J. Mater. Process. Technol. 1991, 28(1–2), 107–116. DOI: 10.1016/0924-0136(91)90210-6.
   Web of Science ®Google Scholar
• Singh., S.; Sankar., M. R.; Jain, V. K. Simulation and Experimental Investigations into Abrasive Flow Nanofinishing of Surgical Stainless Steel Tubes. Mach. Sci. Technol. 2017. DOI: 10.1080/10910344.2017.1365897.
   Web of Science ®Google Scholar
• Singh, S.; Shan, H. S. Development of Magneto Abrasive Flow Machining Process. Int. J. Mach. Tools Manuf. 2002, 42(8), 953–959. DOI: 10.1016/S0890-6955(02)00021-4.
   Web of Science ®Google Scholar
• Jha, S.; Jain, V. K. Design and Development of the Magnetorheological Abrasive Flow Finishing (MRAFF) Process. Int. J. Mach. Tools Manuf. 2004, 44(10), 1019–1029. DOI: 10.1016/J.IJMACHTOOLS.2004.03.007.
   Web of Science ®Google Scholar
• Kathiresan, S.; Mohan, B. Experimental Analysis of Magneto Rheological Abrasive Flow Finishing Process on AISI Stainless Steel 316L. Mater. Manuf. Process. 2018, 33(4), 422–432. DOI: 10.1080/10426914.2017.1279317.
   Web of Science ®Google Scholar
• Walia, R. S.; Shan, H. S.; Kumar, P. Abrasive Flow Machining with Additional Centrifugal Force Applied to the Media. Mach. Sci. Technol. 2006, 10(3), 341–354. DOI: 10.1080/10910340600902157.
   Web of Science ®Google Scholar
• Walia, R. S.; Shan., H. S.; Kumar, P. Parametric Optimization of Centrifugal Force-Assisted Abrasive Flow Machining (CFAAFM) by the Taguchi Method. Mater. Manuf. Process. 2006, 21(4), 375–382. DOI: 10.1080/10426910500411645.
   Web of Science ®Google Scholar
• Sankar, M. R.; Mondal, S.; Ramkumar, J.; Jain., V. K. Experimental Investigations and Modeling of Drill Bit-Guided Abrasive Flow Finishing (DBG-AFF) Process. Int. J. Adv. Manuf. Technol. 2009, 42(7), 678–688. DOI: 10.1007/s00170-008-1642-y.
   Web of Science ®Google Scholar
• Sankar, M. R.; Jain, V. K.; Ramkumar, J. Experimental Investigations into Rotating Workpiece Abrasive Flow Finishing. Wear. 2009, 267(1–4), 43–51. DOI: 10.1016/J.WEAR.2008.11.007.
   Web of Science ®Google Scholar
• Ravi Sankar, M.; Jain, V. K.; Ramkumar, J. Rotational Abrasive Flow Finishing (R-AFF) Process and Its Effects on Finished Surface Topography. Int. J. Mach. Tools Manuf. 2010, 50(7), 637–650. DOI: 10.1016/J.IJMACHTOOLS.2010.03.007.
   Web of Science ®Google Scholar
• Das, M.; Jain, V. K.; Ghoshdastidar, P. S. Nano-finishing of Stainless-steel Tubes Using Rotational Magnetorheological Abrasive Flow Finishing Process. Mach. Sci. Technol. 2010, 14(3), 365–389. DOI: 10.1080/10910344.2010.511865.
   Web of Science ®Google Scholar
• Sharma, A. K.; Venkatesh, G.; Rajesha, S.; Kumar, P. Experimental Investigations into Ultrasonic-Assisted Abrasive Flow Machining (UAAFM) Process. Int. J. Adv. Manuf. Technol. 2015, 80(1), 477–493. DOI: 10.1007/s00170-015-7009-2.
   Web of Science ®Google Scholar
• Yan, B.-H.; Tzeng, H.-J.; Yuan Huang, F.; Lin, Y.-C.; Chow, H.-M. Finishing Effects of Spiral Polishing Method on Micro Lapping Surface. Int. J. Mach. Tools Manuf. 2007, 47(6), 920–926. DOI: 10.1016/J.IJMACHTOOLS.2006.07.009.
   Web of Science ®Google Scholar
• Azami, A.; Azizi, A. Rotational Abrasive Finishing (RAF); Novel Design for Micro/Nanofinishing. Int. J. Adv. Manuf. Technol. 2017, 91, 9–12. DOI: 10.1007/s00170-017-0016-8.
   Web of Science ®Google Scholar
• Azami Gilan, A.; Azizi, A. Rotational Abrasive Micro/nano-finishing. U.S. Patent Application 15/338,382, February 16, 2017.
   Google Scholar
• Azami, A.; Azizi, A.; Khoshanjam, A. Nanofinishing of Stainless-Steel Tubes Using Rotational Abrasive Finishing (RAF) Process. J. Manuf. Process. 2018, 34, 281–291. DOI: 10.1016/j.jmapro.2018.06.027.
   Web of Science ®Google Scholar
• Azami Gilan, A.; Azizi, A. Rotational Abrasive Micro/nano-finishing. U.S. Patent Application 16/271,901, June 6, 2019.
   Google Scholar