Process parameters influence on laser-assisted machining-induced residual stresses

References

• Sutanto, H.; Madl, J. Residual Stress Development in Hard Machining: A Review. Mater. Sci. Eng 2018, 420, 1680–1689. DOI: 10.1088/1757-899x/420/1/012031.
   Google Scholar
• Ulutan, D.; Ozel, T. Hard Machining. In Modern Manufacturing Processes, 1st ed.; Koc, M., Ozel, T., Eds.; John Wiley & Sons: Hoboken, USA, 2019; pp 309–321.
   Google Scholar
• Pourmostaghimi, V.; Zadshakoyan, M. Optimization of Cutting Parameters during Hard Turning Using Evolutionary Algorithms, 1st, ed.; Kumar, K., Davim, J.P., Eds.; John Wiley & Sons: Hoboken, USA, 2019. 77–96.
   Google Scholar
• Saini, A.; Pabla, B. S.; Dhami, S. S. Development in Cutting Tool Technology in Improving Machinability of Ti6Al4V Alloy: A Review. Proc. IMechE B J. Eng. Manuf. 2016, 230(11), 1977–1989. DOI: 10.1177/0954405416640176.
   Web of Science ®Google Scholar
• Khajehzadeh, M.; Moradpour, J.; Razfar, M. R. Influence of Nanofluids Application on Contact Length during Hard Turning. Mater. Manuf. Processes. 2018, 1–9. DOI: 10.1080/10426914.2018.1532091.
   Web of Science ®Google Scholar
• Amiril, S. A. S.; Rahim, E. A.; Hishamudin, A. Z. Effect of Nozzle Distance and Cutting Parameters on MQL Machining of AISI 1045. J. Phys. 2019, 1150, 1–7. DOI: 10.1088/1742-6596/1150/1/012045.
   Google Scholar
• Khajehzadeh, M.; Akhlaghi, M.; Razfar, M. R. Finite Element Simulation and Experimental Investigation of Tool Temperature during Ultrasonically Assisted Turning of Aerospace Aluminum Using Multicoated Carbide Inserts. Int. J. Adv. Manuf. Technol. 2014, 75(58), 1163–1175. DOI: 10.1007/s00170-014-6163-2.
   Google Scholar
• Vali, A.; Longuemard, J. P.; Marot, G. Residual Stress Conditions in Laser-Assisted Machining. Welding Int. 1999, 13(4), 296–299. DOI: 10.1080/09507119909447382.
   Google Scholar
• Langan, S. M.; Ravindra, D.; Mann, A. B. Process Parameter Effects on Residual Stress and Phase Purity after Micro Laser-Assisted Machining of Silicon. Mater. Manuf. Processes. 2018, 33(14), 1578–1586. DOI: 10.1080/10426914.2018.1453145.
   Web of Science ®Google Scholar
• Shen, X.; Numerical Modeling and Experimental Investigation of Laser Assisted Machining of Silicon Nitride Ceramic. Ph.D. Dissertation, Kansas State University: Manhattan, USA, 2010.
   Google Scholar
• Kashani, M. M.; Movahhedy, M. R.; Ahmadian, M. T.; Razavi, R. S. In-process Determination of Laser Beam Absorption Coefficient for Laser-Assisted Turning Processes. Int. J. Adv. Manuf. Technol. 2017, 92(58), 2929–2938. DOI: 10.1007/s00170-017-0326-x.
   Google Scholar
• Ding, H.; Shin, Y. C. Laser-assisted Machining of Hardened Steel Parts with Surface Integrity Analysis. Int. J. Mach. Tools Manuf. 2010, 50(1), 106–114. DOI: 10.1016/j.ijmachtools.2009.09.001.
   Web of Science ®Google Scholar
• Nasr, M. N. A.; On Modelling of Machining-Induced Residual Stresses. Ph.D. Dissertation, McMaster University: Ontario, Canada, 2007.
   Google Scholar
• Ulutan, D.; Machining-induced Residual Stresses: Investigation of Machining Parameter Effects. Ph.D. Dissertation, The State University of New Jersey: New Brunswick, USA, 2013.
   Google Scholar
• Jafarian, F.; Amirabadi, H.; Sadri, J. Integration of Finite Element Simulation and Intelligent Methods for Evaluation of Thermo-Mechanical Loads during Hard Turning Process. Proc. IMechE B J. Eng. Manuf. 2013, 227(2), 235–248. DOI: 10.1177/0954405412466995.
   Web of Science ®Google Scholar
• Samanta, A.; Teli, M.; Singh, R. Experimental Characterization and Finite Element Modeling of the Residual Stresses in Laser-Assisted Mechanical Micromachining of Inconel 625. Proc. IMechE B J. Eng. Manuf. 2015, 231(10), 1735–1751. DOI: 10.1177/0954405415612677.
   Web of Science ®Google Scholar
• Hung, Z.; He, S.; Kejia, Z.; Zhang, X.; Ding, H. An Analysis of Cutting Parameters, Coated Materials and Nose Radii on Residual Stresses When Turning Inconel 718. Procedia CIRP. 2016, 46, 368–371. DOI: 10.1016/j.procir.2016.03.123.
   Google Scholar
• Balbaa, M. A.; Nasr, M. N. A.; Elgamal, H. A Sensitivity Analysis on the Effect of Laser Power on Residual Stresses When Laser-Assisted Machining AISI 4340. Procedia CIRP. 2017, 58, 31–36. DOI: 10.1016/j.procir.2017.03.182.
   Google Scholar
• Song, H.; Dam, J.; Chen, X.; Xiao, J. Experimental Investigation of Machinability in Laser-Assisted Machining of Fused Silica. Int. J. Adv. Manuf. Technol. 2018, 97(14), 267–278. DOI: 10.1007/s00170-018-1917-x.
   Google Scholar
• Kugalur-Palanisamy, N.; Rivière-Lorphèvre, E.; Ducobu, F.; Arrazola, P. J. Influence of the Choice of the Parameters on Constitutive Models and Their Effects on the Results of Ti6Al4V Orthogonal Cutting Simulation. Procedia Manuf. 2020, 47, 458–465. DOI: 10.1016/j.promfg.2020.04.335.
   Google Scholar
• Sanborn, B.; Song, B.; Thompson, A.; Reece, B.; Attaway, S. High Strain Rate Tensile Response of A572 and 4140 Steel. Procedia Eng. 2017, 197, 33–41. DOI: 10.1016/j.proeng.2017.08.079.
   Google Scholar
• Hou, X.; Liu, Z.; Wang, B.; Lv, W.; Liang, X.; Hua, Y. Stress-strain Curves and Modified Material Constitutive Model for Ti-6Al-4V over the Wide Ranges of Strain Rate and Temperature. Mater. 2018, 11(6), 938. DOI: 10.3390/ma11060938.
   Google Scholar
• Calamaz, M.; Coupard, D.; Girot, F. A New Material Model for 2D Numerical Simulation of Serrated Chip Formation When Machining Titanium Alloy Ti–6Al–4V. Int. J. Mach. Tools Manuf. 2008, 48(34), 275–288. DOI: 10.1016/j.ijmachtools.2007.10.014.
   Google Scholar
• Nasr, M.; Ng, E. G.; Elbestawi, M. Effects of Workpiece Thermal Properties on Machining-induced Residual Stresses-thermal Softening and Conductivity. Proc. IMechE B J. Eng. Manuf.2007, 221(9), 1387–1400. DOI: 10.1243/09544054JEM856.
   Web of Science ®Google Scholar
• Moradi, M.; Mehrabi, O.; Azdast, T.; Benyounis, K. Y. Enhancement of Low Power CO2 Laser Cutting Process for Injection Molded Polycarbonate. Optics Laser Technol. 2017, 96, 208–218. DOI: 10.1016/j.optlastec.2017.05.022.
   Web of Science ®Google Scholar
• ISO/TS 21432: 2005. Non-destructive testing–Standard test method for determining residual stresses by neutron diffraction.
   Google Scholar
• Prevey, P. S. X-ray Diffraction Residual Stress Techniques. ASM Int., ASM Handbook. 1986, 10, 380–392.
   Google Scholar