Influence of tool electrode feed rate in the electrochemical discharge drilling of a glass substrate

References

• Hof, L. A.; Ziki, J. A. Micro-hole Drilling on Glass Substrates - A Review. Micromachines 2017, 8(2), 53. DOI: 10.3390/mi8020053.
   Web of Science ®Google Scholar
• Lee, J. Y.; Lee, S. W.; Lee, S. K.; Park, J. H. Through-Glass Copper via using the Glass Reflow and Seedless Electroplating Processes for Wafer-Level RF MEMS Packaging. J. Micromech. Microeng. 2013, 23(8), 85012. DOI: 10.1088/0960-1317/23/8/085012.
   Web of Science ®Google Scholar
• Kannojia, H. K.; Arab, J.; Pegu, B. J.; Dixit, P. Fabrication and Characterization of Through-Glass Vias by the ECDM Process. J. Electrochem. Soc. 2019, 166(13), D531–D538. DOI: 10.1149/2.0141913jes.
   Web of Science ®Google Scholar
• Armagan, M.; Armagan, A. A. Cutting Performance of Glass-vinyl Ester Composite by Abrasive Water Jet. Mater. Manuf. Process. 2017, 32(15), 1715–1722.
   Web of Science ®Google Scholar
• Ahmed, N.; Darwish, S.; Alahmari, A. M. Laser Ablation and Laser-Hybrid Ablation Processes: A Review. Mater. Manuf. Process. 2016, 31(9), 1121–1142. DOI: 10.1080/10426914.2015.1048359.
   Web of Science ®Google Scholar
• Haashir, A.; Debnath, T.; Patowari, P. K. A Comparative Assessment of Micro-drilling in Boron Carbide Using Ultrasonic Machining. Mater. Manuf. Process. 2020, 35(1), 86–94. DOI: 10.1080/10426914.2019.1697447.
   Web of Science ®Google Scholar
• Iliescu, C.; Chen, B.; Miao, J. On the Wet Etching of Pyrex Glass. Sens. Actuators. A Phys. 2008, 143(1), 154–161. DOI: 10.1016/j.sna.2007.11.022.
   Web of Science ®Google Scholar
• Singh, T.; Dvivedi, A. Developments in Electrochemical Discharge Machining: A Review on Electrochemical Discharge Machining, Process Variants, and Their Hybrid Methods. Int. J. Mach. Tools Manuf. 2016, 105, 1–13. DOI: 10.1016/j.ijmachtools.2016.03.004.
   Web of Science ®Google Scholar
• Kumar, N.; Mandal, N.; Das, A. K. Micro-machining through Electrochemical Discharge Processes: A Review. Mater. Manuf. Process. 2020, 35(4), 363–404. DOI: 10.1080/10426914.2020.1711922.
   Web of Science ®Google Scholar
• Kurafuji, H.; Suda, K. Electrical Discharge Drilling of Glass. Ann. CIRP. 1968, 16, 415–419.
   Google Scholar
• Nair, S.; Dutta, A.; Narayanan, R.; Giridharan, A. Investigation on EDM Machining of Ti6Al4V with Negative Polarity Brass Electrode. Mater. Manuf. Process. 2019, 36(16), 1824–1831.
   Google Scholar
• Kumar, S.; Bhattacharya, B. Electrochemical Micromachining of Micro Square Pattern Using Reusable Masked Tool. Mater. Manuf. Process. 2019, 34(5), 487–493. DOI: 10.1080/10426914.2018.1532582.
   Web of Science ®Google Scholar
• Mishra, D. K.; Arab, J.; Magar, Y.; Dixit, P. High Aspect Ratio Glass Micromachining by Multi-Pass Electrochemical Discharge Based Micromilling Technique. ECS J. Solid State Sci. Technol. 2019, 8(6), P322–P331. DOI: 10.1149/2.0191906jss.
   Web of Science ®Google Scholar
• Singh, T.; Dvivedi, A. On Pressurized Feeding Approach for Effective Control on Working Gap in ECDM. Mater. Manuf. Process. 2018, 33(4), 462–473. DOI: 10.1080/10426914.2017.1339319.
   Web of Science ®Google Scholar
• Arab, J.; Mishra, D. K.; Kannojia, H. K.; Adhale, P.; Dixit, P. Fabrication of Multiple Through-Holes in Non-conductive Materials by Electrochemical Discharge Machining for RF MEMS Packaging. J. Mater. Process. Technol. 2019, 271, 542–553. DOI: 10.1016/j.jmatprotec.2019.04.032.
   Web of Science ®Google Scholar
• Rathore, R. S.; Dvivedi, A. Sonication of Tool Electrode for Utilizing High Discharge Energy during ECDM. Mater. Manuf. Process. 2020, 35(4), 415–429. DOI: 10.1080/10426914.2020.1718699.
   Web of Science ®Google Scholar
• Sundaram, M.; Kolhekar, K. R. Study of Gas Film Characterization and Its Effect in Electrochemical Discharge Machining. Precis. Eng. 2018, 53, 203–211. Doi:10.1016/j.precisioneng.2018.04.002.
   Web of Science ®Google Scholar
• Panda, M. C.; Yadava, V. Intelligent Modeling and Multiobjective Optimization of Die Sinking Electrochemical Spark Machining Process. Mater. Manuf. Process. 2012, 27(1), 10–25. DOI: 10.1080/10426914.2010.544812.
   Web of Science ®Google Scholar
• Jha, N. K.; Singh, T.; Dvivedi, A.; Rajesha, S. Experimental Investigations into Triplex Hybrid Process of GA-RDECDM during Subtractive Processing of MMC’s. Mater. Manuf. Process. 2019, 34(3), 243–255. DOI: 10.1080/10426914.2018.1512126.
   Web of Science ®Google Scholar
• Goud, M.; Sharma, A. K.; Jawalkar, C. A Review on Material Removal Mechanism in Electrochemical Discharge Machining (ECDM) and Possibilities to Enhance the Material Removal Rate. Precis. Eng. 2016, 45, 1–17. DOI: 10.1016/j.precisioneng.2016.01.007.
   Web of Science ®Google Scholar
• Maillard, P.; Despont, B.; Bleuler, H.; Wüthrich, R. Geometrical Characterization of Micro-holes Drilled in Glass by Gravity-Feed with Spark Assisted Chemical engraving(SACE). J. Micromech. Microeng. 2007, 17, 1343–1349. DOI: 10.1088/0960-1317/17/7/017.
   Web of Science ®Google Scholar
• Ziki, J. D. A.; Wuthrich, R. Forces Exerted on the Tool-electrode during Constant-feed Glass Microdrilling by Spark Assisted Chemical Engraving. Int. J. Mach. Tools Manuf. 2013, 73, 47–54. DOI: 10.1016/j.ijmachtools.2013.06.008.
   Web of Science ®Google Scholar
• Ziki, J. D. A.; Didar, T. F.; Wuthrich, R. Micro-texturing Channel Surfaces on Glass with Spark Assisted Chemical Engraving. Int. J. Mach. Tools Manuf. 2012, 57, 66–72. DOI: 10.1016/j.ijmachtools.2012.01.012.
   Web of Science ®Google Scholar
• Mishra, D. K.; Verma, A. K.; Arab, J.; Marla, D.; Dixit, P. Numerical and Experimental Investigations into Microchannel Formation in Glass Substrate Using Electrochemical Discharge Machining. J. Micromech. Microeng. 2019, 29(7), 75004. DOI: 10.1088/1361-6439/ab1da7.
   Web of Science ®Google Scholar
• Saranya, S.; Ravisankar, A. Fabrication of Precise Microchannels Using a Side-insulated Tool in a Spark Assisted Chemical Engraving Process. Mater. Manuf. Process. 2018, 33(13), 1422–1428. DOI: 10.1080/10426914.2017.1401728.
   Web of Science ®Google Scholar
• Singh, T.; Dvivedi, A. On Performance Evaluation of Textured Tools during Micro-channeling with ECDM. J. Manuf. Process. 2018, 32, 699–713. DOI: 10.1016/j.jmapro.2018.03.033.
   Web of Science ®Google Scholar
• Hajian, M.; Razfar, M. R.; Etefagh, A. H. Experimental Study of Tool Bending Force and Feed Rate in ECDM Milling. Int. J. Adv. Manuf. Technol. 2017, 91, 1677–1687. DOI: 10.1007/s00170-016-9860-1.
   Web of Science ®Google Scholar
• Saranya, S.; Ravisankar, A. Fabrication of Precise Micro-holes on Quartz Substrates with Improved Aspect Ratio Using the Constant Velocity Feed Drilling Technique of an ECDM Process. J. Micromech. Microeng. 2018, 28(12), 125009. DOI: 10.1088/1361-6439/aae8f5.
   Web of Science ®Google Scholar
• Patro, S. K.; Mishra, D. K.; Arab, J.; Dixit, P. Numerical and Experimental Analysis of High-aspect-ratio Micro-tool Electrode Fabrication Using Controlled Electrochemical Machining. J. Appl. Electrochem. 2020, 50, 169–184. DOI: 10.1007/s10800-019-01380-5.
   Web of Science ®Google Scholar
• Arab, J.; Kannojia, H. K.; Dixit, P. Effect of Tool Electrode Roughness on the Geometric Characteristics of Through-holes Formed by ECDM. Precis. Eng. 2019, 60, 437–447. DOI: 10.1016/j.precisioneng.2019.09.008.
   Web of Science ®Google Scholar
• Ziki, J. D. A.; Wuthrich, R. Tool Wear and Tool Thermal Expansion during Micro-machining by Spark Assisted Chemical Engraving. Int. J. Adv. Manuf. Technol. 2012, 61, 481–486. DOI: 10.1007/s00170-011-3731-6.
   Web of Science ®Google Scholar
• Biswas, R.; Kuar, A. S.; Biswas, S. K.; Mitra, S. Effects of Process Parameters on Hole Circularity and Taper in Pulsed Nd: YAGLaser Microdrilling of Tin-Al2O3 Composites. Mater. Manuf. Process. 2010, 25(6), 503–514. DOI: 10.1080/10426910903365737.
   Web of Science ®Google Scholar
• Ohara, T.; Toyoda, K.; Otsubo, R.; Nagatsuka, K.; Kubota, Y.; Yasaka, M.; Naritomi, H.; Minematsu, K. Eccentric Stenosis of the Carotid Artery Associated with Ipsilateral Cerebrovascular Events. Am. J. Neuroradiol. 2008, 29(6), 1200–1203. DOI: 10.3174/ajnr.A0997.
   PubMed Web of Science ®Google Scholar
• Elhami, S.; Razfar, M. R. Effect of Ultrasonic Vibration on the Single Discharge of Electrochemical Discharge Machining. Mater. Manuf. Process. 2018, 33(4), 444–451. DOI: 10.1080/10426914.2017.1328113.
   Web of Science ®Google Scholar
• Behroozfar, A.; Razfar, M. R. Experimental Study of the Tool Wear during the Electrochemical Discharge Machining. Mater. Manuf. Process. 2016, 31(5), 574–580. DOI: 10.1080/10426914.2015.1004685.
   Web of Science ®Google Scholar