References
- Sahoo, R. K.; Prasad, V.; Kao, I.; Talbott, J.; Gupta, K. P. Towards an Integrated Approach for Analysis and Design of Wafer Slicing by a Wire Saw. J. Electron. Packag. 1998, 120(1), 35–40. DOI: 10.1115/1.2792283.
- Kray, D.; Schumann, M.; Eyer, A.; Willeke, G. P.; Kübler, R.; Beinert, J.; Kleer, G. Solar Wafer Slicing with Loose and Fixed Grain. In Proceeding IEEE 4th World Conference Photovoltaic Energy, Piscataway, NJ, USA, 2006, 948–951. DOI: 10.1109/WCPEC.2006.279613.
- Schindler, F.; Fell, A.; Müller, R.; Benick, J.; Richter, A.; Feldmann, F.; Krenckel, P.; Riepe, S.; Schubert, M. C.; Glunz, S. W. Towards the Efficiency Limits of Multicrystalline Silicon Solar Cells. Sol. Energy Mater. Sol. Cells. 2018, 185, 198–204. DOI: 10.1016/j.solmat.2018.05.006.
- Meinel, B.; Koschwitz, T.; Acker, J. Textural Development of SiC and Diamond Wire Sawed Sc-silicon Wafer. Energy Procedia. 2012, 27, 330–336. DOI: 10.1016/j.egypro.2012.07.072.
- Clark, W. I.; Shih, A. J.; Hardin, C. W.; Lemaster, R. L.; McSpadden, S. B. Fixed Abrasive Diamond Wire machining–Part I: Process Monitoring and Wire Tension Force. Int. J. Mach. Tools Manuf. 2003, 43(5), 523–532. DOI: 10.1016/S0890-6955(02)00215-8.
- Zhang, Y.;. Slicing Mechanism of Multi-Wire Sawing Using Electroplated Diamond Wire. Int. J. Eng. Sci. & Res. Tech. 2017, 6(11), 130–140. DOI: 10.5281/zenodo.1042096.
- Hardin, C. W.; Jun., Q.; Shih, A. J. Fixed Abrasive Diamond Wire Saw Slicing of Single-Crystal Silicon Carbide Wafers. Mater. Manuf. Process. 2004, 19(2), 355–367. DOI: 10.1081/AMP-120029960.
- Liu, T.; Ge, P.; Bi, W.; Wang, P. Fracture Strength of Silicon Wafers Sawn by Fixed Diamond Wire Saw. Sol. Energy. 2017, 157, 427–433. DOI: 10.1016/j.solener.2017.08.063.
- Watanabe, N.; Kondo, Y.; Ide, D.; Matsuki, T.; Takato, H.; Sakata, I. Characterization of Polycrystalline Silicon Wafers for Solar Cells Sliced with Novel Fixed-Abrasive Wire. Prog. Photovolt. Res. Appl. 2010, 18(7), 485–490. DOI: 10.1002/pip.923.
- Kayabasi, E.; Ozturk, S.; Celik, E.; Kurt, H. Determination of Cutting Parameters for Silicon Wafer with a Diamond Wire Saw Using an Artificial Neural Network. Sol. Energy. 2017, 149, 285–293. DOI: 10.1016/j.solener.2017.04.022.
- Jia, Z.; Zhao, L.; Ren, Z.; Wang, F.; Li, D.; Ji, W. Investigation into Influence of Feed Speed on Surface Roughness in Wire Sawing. Mater. Manuf. Process. 2015, 30(7), 875–881. DOI: 10.1080/10426914.2014.984211.
- Tomono, K.; Miyamoto, S.; Ogawa, T.; Furuya, H.; Okamura, Y.; Yoshimoto, M.; Komatsu, R.; Nakayama, M. Recycling of Kerf Loss Silicon Derived from Diamond-Wire Saw Cutting Process by Chemical Approach. Sep. Purif. Technol. 2013, 120, 304–309. DOI: 10.1016/j.seppur.2013.10.014.
- Gao, Y.;. Ge1, P. Analysis of Grit Cut Depth in Fixed-Abrasive Diamond Wire Saw Slicing Single Crystal Silicon. Solid State Phenom. 2011, 175, 72–76. DOI: 10.4028/www.scientific.net/SSP.175.72.
- Yao, C.; Zhang, W.; Liu, K.; Li, H.; Peng, W. A Pneumatic Conveying Method for the Manufacturing of Ultraviolet Curing Diamond Wire Saws. Mater. Manuf. Process. 2017, 32(5), 523–529. DOI: 10.1080/10426914.2016.1257130.
- Kumar, A.; Melkoteb, S. N. Wear of Diamond in Scribing of Multi-Crystalline Silicon. J. Appl. Phys. 2018, 124(6), 065101. DOI: 10.1063/1.5037106.
- Zhang, W.; Yao, C.; Xu, X.; Li, H.; Li, K. Improvement of Magnetic Induction-Wire Sawing Process Using a Magnetic System. Mater. Manuf. Process. 2018, 33(6), 676–682. DOI: 10.1080/10426914.2017.1364858.
- Ozturk, S.; Levent, A.; Celik, E. A Comprehensive Study on Slicing Processes Optimization of Silicon Ingot for Photovoltaic Applications. Sol. Energy. 2018, 161, 109–124. DOI: 10.1016/j.solener.2017.12.040.
- Kim, H.; Kim, D.; Kim, C.; Jeong, H. Multi-Wire Sawing of Sapphire Crystals with Reciprocating Motion of Electroplated Diamond Wires. Cirp. Ann-Manuf. Techn. 2013, 62(1), 335–338. DOI: 10.1016/j.cirp.2013.03.122.
- Halliday, D.; Resnick, R.; Walker, J. Fundamentals of Physics; 9th ed. USA: John Wiley & Sons Inc., 2011.
- Erceg, N.; Aviani, I. Students’ Understanding of Velocity-Time Graphs and the Sources of Conceptual Difficulties. Croat. J. Educ. 2014, 16(1), 43–80. DOI: 10.15516/cje.v16i1.505.
- Sopori, B.; Devayajanam, S.; Shet, S.; Guhabiswas, D.; Basnyat, P.; Moutinho, H.; Gedvilas, L.; Jones, K.; Binns, J. Characterizing Damage on Si Wafer Surfaces Cut by Slurry and Diamond Wire Sawing. In Proceeding 39th IEEE Photovoltaic Special Conference, Denver, CO., USA, 2013, 946–950. DOI: 10.1109/PVSC.2013.6744298.
- Jiang, Y.; Shen, H.; Pu, T.; Zheng, C.; Tang, Q.; Yang, W.; Wu, J.; Rui, C.; Li, Y. Hybrid Process for Texturization of Diamond Wire Sawn Multi-Crystalline Silicon Solar Cell. Phys. Status. Solidi-R. 2016, 12(10), 870–873. DOI: 10.1002/pssr.201600318.
- Teomete, E.; Mechanics of Wire Saw Machining Process: Experimental Analyses and Modeling. Ph.D. dissertation, Engineering Mechanics Dept. Iowa State, Univ. of Iowa State, U.S.A., 2008.
- Cartona, L.; Riva, R.; Nelias, D.; Fourmeau, M.; Coustier, F.; Chabli, A. Comparative Analysis of Mechanical Strength of Diamond-Sawn Silicon Wafers Depending on Saw Mark Orientation Crystalline Nature and Thickness. Sol. Energy Mater. Sol. Cells. 2019, 201, 110068. DOI: 10.1016/j.solmat.2019.110068.