Scale effects and a method to evaluate similarity in electrochemical micromachining of Nitinol

References

• Rahman, Z.; Das, A. K.; Chattopadhyaya, S. Microhole Drilling through Electrochemical Processes: A Review. Mater. Manuf. Processes. 2018, 33(13), 1379–1405. DOI: 10.1080/10426914.2017.1401721.
   Web of Science ®Google Scholar
• Qianxi, H.; Zhuji, J.; Guannan, J.; Shi, Y. The Investigation on Electrochemical Denatured Layer of 304 Stainless Steel. Mater. Manuf. Processes. 2018, 33(15), 1661–1666. DOI: 10.1080/10426914.2018.1453152.
   Web of Science ®Google Scholar
• Zhu, D.; Yu, L.; Zhang, R. Design of the Cross-structural Cathodes in Electrochemical Machining of Aero-engine Blades. Mach. Sci. Technol. 2018, 22(5), 851–864. DOI: 10.1080/10910344.2017.1415936.
   Web of Science ®Google Scholar
• Zhu, D.; Hu, X.; Lin, J.; Xu, Z.; Liu, J. Investigation into the Blade-formation Process in Electrochemical Trepanning of Diffusers. Mach. Sci. Technol. 2019. DOI: 10.1080/10910344.2019.1701018.
   Web of Science ®Google Scholar
• Mu, C.; Liu, H.; Ziai, L.; Jiyu, L.; Yingjie, X.; Xin, L.; Zhuji, J.; Xuyue, W. Development of Superhydrophilic Al Foil with Micropore Arrays via Mask Electrochemical Machining and Chemical Immersion for Efficient Oil/water Separation. J. Disper. Sci. Technol. 2019. DOI: 10.1080/01932691.2019.1623694.
   Web of Science ®Google Scholar
• Elhami, S.; Razfar, M. R. Effect of Ultrasonic Vibration on the Single Discharge of Electrochemical Discharge Machining. Mater. Manuf. Processes. 2018, 33(4), 444–451. DOI: 10.1080/10426914.2017.1328113.
   Web of Science ®Google Scholar
• Pradeep, N.; Shanmuga Sundaram, K.; Pradeep Kumar, M. Performance Investigation of Variant Polymer Graphite Electrodes Used in Electrochemical Micromachining of ASTMA240 Grade 304. Mater. Manuf. Processes. 2020, 35(1), 72–85. DOI: 10.1080/10426914.2019.1697445.
   Web of Science ®Google Scholar
• Zhang, J.; Xu, Z.; Zhu, D.; Su, W.; Zu, D. Study of Tool Trajectory in Blisk Cannel ECM Wit Spiral Feeding. Mater. Manuf. Processes. 2017, 32(3), 333–338. DOI: 10.1080/10426914.2016.1151040.
   Web of Science ®Google Scholar
• Soundarrajan, M.; Thanigaivelan, R. Effect of Coated and Geometrically Modified Tools on Performance of Electrochemical Micromachining. Mater. Manuf. Processes. 2020, 35, 775–782. DOI: 10.1080/10426914.2020.1740252.
   Web of Science ®Google Scholar
• Mishra, K.; Sarkar, B. R.; Bhattacharya, B. Influence of Inner-spraying Rotating Tool during Electrochemical Milling of Nimonic-263 Alloy. Mater. Manuf. Processes. 2019, 34(7), 807–813. DOI: 10.1080/10426914.2020.1740252.
   Web of Science ®Google Scholar
• Qu, N. S.; Hu, Y.; Zhu, D.; Xu, Z. Y. Electrochemical Machining of Blisk Channels with Progressive-pressure Electrolyte Flow. Mater. Manuf. Processes. 2014, 29(5), 572–578. DOI: 10.1080/10426914.2014.892974.
   Web of Science ®Google Scholar
• Hasan, D.; Oguzhan, Y.; Bahattin, K. A Simplified Mathematical Model Development for the Design of Free-form Cathode Surface in Electrochemical Machining. Mater. Manuf. Processes. 2017, 21(1), 157–173. DOI: 10.1080/10910344.2016.1275192.
   Google Scholar
• Ali, B.; Razfa, M. R. Experimental Study of the Tool Wear during the Electrochemical Discharge Machining. Mater. Manuf. Processes. 2016, 31(5), 574–580. DOI: 10.1080/10426914.2015.1004685.
   Web of Science ®Google Scholar
• Tang, L.; Guo, Y. F. Experimental Study of Special Purpose Stainless Steel on Electrochemical Machining of Electrolyte Composition. Mater. Manuf. Processes. 2013, 28(4), 457–462. DOI: 10.1080/10426914.2012.746784.B.
   Web of Science ®Google Scholar
• Maniraj, S.; Thanigaivelan, R. Effect of Electrode Heating on Performance of Electrochemical Micromachining. Mater. Manuf. Processes. 2019, 34(13), 1494–1501. DOI: 10.1080/10426914.2019.1655153.
   Web of Science ®Google Scholar
• Wang, K.; Shen, Q.; He, B. Localized Electrochemical Deburring of Cross Hole Using Gelatinous Electrolyte. Mater. Manuf. Processes. 2016, 31(13), 1749–1754. DOI: 10.1080/10426914.2015.1117620.
   Web of Science ®Google Scholar
• Rathod, V.; Doloi, B.; Bhattacharyya, B. Sidewall Insulation of Micro Tool for Electrochemical Micromachining to Enhance the Machining Accuracy. Mater. Manuf. Processes. 2014, 29(3), 305–313. DOI: 10.1080/10426914.2013.864407.
   Web of Science ®Google Scholar
• Qian, S.; Feng, J.; Qu, N.; Li, H. Improving the Localization of Surface Texture by Electrochemical Machining with Auxiliary Anode. Mater. Manuf. Processes. 2014, 29(11), 1488–1493. DOI: 10.1080/10426914.2014.930950.
   Web of Science ®Google Scholar
• Fabio, S.; Antonello, A.; Umberto, P.; Antonino, S. Selective Electrochemical Machining of the Steel Molds in Hot Isostatic Pressing of Ti6Al4V Powder. Mater. Manuf. Processes. 2018, 33(14), 1587–1593. DOI: 10.1080/10426914.2018.1424905.
   Web of Science ®Google Scholar
• Nitesh, K.; Niladri, M.; Das, A. K. Micro-machining through Electrochemical Discharge Processes: A Review. Mater. Manuf. Processes. 2020, 35(4), 363–404. DOI: 10.1080/10426914.2020.1711922.
   Web of Science ®Google Scholar
• Goel, H.; Pandey, P. M. Experimental Investigations into the Ultrasonic Assisted Jet Electrochemical Micro-drilling Process. Mater. Manuf. Processes. 2017, 32(13), 1547–1556. DOI: 10.1080/10426914.2017.1279294.
   Web of Science ®Google Scholar
• Kunar, S.; Bhattacharyya, B. Electrochemical Micromachining of Micro Square Pattern Using Reusable Masked Tool. Mater. Manuf. Processes. 2019, 34(5), 487–493. DOI: 10.1080/10426914.2018.1532582.
   Web of Science ®Google Scholar
• Mouliprasanth, B.; Hariharan, P. Measurement of Performance and Geometrical Features in Electrochemical Micromachining of SS304 Alloy. Exp. Tech. 2019. DOI: 10.1007/s40799-019-00350-y.
   Web of Science ®Google Scholar
• Thanigaivelan, R.; Arunachalam, R. M.; Kumar, M.; Deeraj, B. P. Performance of Electrochemical Micromachining of Copper through Infrared Heated Electrolyte. Mater. Manuf. Processes. 2018, 33(4), 383–389. DOI: 10.1080/10426914.2017.1279304.
   Web of Science ®Google Scholar
• Singh, A.; Anandita, S.; Gangopadhyay, S. Microstructural Analysis and Multiresponse Optimization during ECM of Inconel 825 Using Hybrid Approach. Mater. Manuf. Processes. 2014, 30(7), 842–851. DOI: 10.1080/10426914.2014.973575.
   Web of Science ®Google Scholar
• Shen, N.; Ningsong, Q.; Xiaokang, Y.; Gangqiang, L.; Hansong, L. Combined Rough and Finish Machining of Ti–6Al–4V Alloy by Electrochemical Mill-grinding. Mach. Sci. Technol. 2020. DOI: 10.1080/10910344.2020.1752236.
   Web of Science ®Google Scholar
• Sankar, M.; Gnanavelbabu, A.; Rajkumar, K.; Thusal, N. A. Electrolytic Concentration Effect on the Abrasive Assisted Electrochemical Machining of an Aluminum-boron Carbide Composite. Mater. Manuf. Processes. 2017, 32(6), 687–692. DOI: 10.1080/10426914.2016.1244840.
   Web of Science ®Google Scholar
• Liu, Q.; Zhang, Q.; Wang, K.; Zhu, G.; Fu, X.; Zhang, J. Scale Effects and a Method for Similarity Evaluation in Micro Electrical Discharge Machining. Chin. J. Mech. Eng. 2016, 29(6), 1193–1199. DOI: 10.3901/cjme.2016.0622.077.
   Web of Science ®Google Scholar
• Wang, K.; Zhang, Q.; Zhang, J. Evaluation of Scale Effect of Micro Electrical Discharge Machining System. J. Manuf. 2019, 38, 174–178. DOI: 10.1016/j.jmapro.2019.01.005.
   Web of Science ®Google Scholar
• Liu, Q.; Zhang, Q.; Zhang, M.; Zhang, J. Review of Size Effects in Micro Electrical Discharge Machining. Precis. Eng. 2016, 44, 29–40. DOI: 10.1016/j.precisioneng.2016.01.006.
   Web of Science ®Google Scholar
• Vollertsen, F.; Biermann, D.; Hansen, H.; Jawahir, I.; Kuzman, K. Size Effects in Manufacturing of Metallic Components. CIRP Annals. 2009, 58(2), 566–587. DOI: 10.1016/j.cirp.2009.09.002.
   Web of Science ®Google Scholar
• Ning, M.; Yang, C.; Shuguo, Z.; Jingchun, L.; Baofeng, S.; Juhe, S. Preparation of Super-hydrophobic Surface on Al–Mg Alloy Substrate by Electrochemical Etching. Surf. Eng. 2019, 35(5), 394–402. DOI: 10.1080/02670844.2017.1421883.
   Web of Science ®Google Scholar
• Jia-Chang, C.; You-An, L.; Chia-Lung, K.; Chao-Ching, H.; Wing-Hing, Y. A. U. An Improvement in the Quality of Holes Drilled in Quartz Glassby Electrochemical Discharge Machining. Smart. Sci. 2019, 7(3), 169–174. DOI: 10.1080/23080477.2019.1597579.
   Web of Science ®Google Scholar
• Kunar, S.; Bhattacharya, B. Investigation into Fabrication of Microslot Arrays by Electrochemical Micromachining. Mach. Sci. Technol. 2019, 23(4), 629–649. DOI: 10.1080/10910344.2019.1575406.
   Web of Science ®Google Scholar
• Yeong Jae, J.; Sung Jin, K. Effect of the Electrochemically Induced Surface Annealing on Corrosion Behaviors of 304L Stainless Steel in an Acidic Environment. Corr. Engg, Sci. Tech. Sci. 2020, 55(3), 217–223. DOI: 10.1080/1478422X.2020.1713534.
   Web of Science ®Google Scholar
• Bhattacharyya, B.; Munda, J. Experimental Investigation on the Influence of Electrochemical Machining Parameters on Machining Rate and Accuracy in Micromachining Domain. Int. J. Mach. Tool. Manu. 2003, 43(13), 1301–1310. DOI: 10.1016/s0890-6955(03)00161-5.
   Web of Science ®Google Scholar
• Faust, C. L.;. Electrochemical Machining of Metals. Trans. IMF. 1964, 41(1), 1–8. DOI: 10.1080/00202967.1967.11869877.
   Google Scholar
• Tsui, H. P.; Hung, J. C.; You, J. C.; Yan, B. H. Improvement of Electrochemical Micro Drilling Accuracy Using Helical Tool. Mater. Manuf. Processes. 2008, 23(5), 499–505. DOI: 10.1080/10426910802104237.
   Web of Science ®Google Scholar
• Kangnan, F.; Zhuji, J.; Xianglong, Z.; Qiulin, W.; Jing, S. A Facile Electrochemical Machining Process to Fabricate Superhydrophobic Surface on Iron Materials and Its Applications in Anti-icing. J. Disper. Sci. Technol. 2019. DOI: 10.1080/01932691.2019.1699429.
   Web of Science ®Google Scholar
• Tarlochan, S.; RajendraKumar, A.; Akshay, D. Experimental Investigations into Rotary Mode Electrochemical Discharge Drilling (RM-ECDD) of Metal Matrix Composites. Mach. Sci. Technol. 2020, 24(2), 195–226. DOI: 10.1080/10910344.2019.1636270.
   Web of Science ®Google Scholar
• Chang, D.-Y.; Shen, P.-C.; Hung, J.-C.; Lee, S.-J.; Tsui, H.-P. Process Simulation-assisted Fabricating Micro-herringbone Grooves for a Hydrodynamic Bearing in Electrochemical Micromachining. Mater. Manuf. Processes. 2011, 26(12), 1451–1458. DOI: 10.1080/10426914.2011.551905.
   Web of Science ®Google Scholar
• Huang, S. F.; Liu, Y. Electrochemical Micromachining of Complex Shapes on Nickel and Nickel Based Super Alloys. Mater. Manuf. Processes. 2014, 29(11–12), 1483–1487. DOI: 10.1080/10426914.2014.930897.
   Web of Science ®Google Scholar
• Xu, L.; Pan, Y.; Zhao, C. Distance Effects in Electrochemical Micromachining. Sci. Rep. 2016, 6(1). DOI: 10.1038/srep31778.
   Google Scholar