Effects of machining parameters on surface quality of composites reinforced with natural fibers

References

• Maleki, H. R.; Hamedi, M.; Kubouchi, M.; Arao, Y. Experimental Investigation on Drilling of Natural Flax Fiber-Reinforced Composites. Mater. Manuf. Process. 2019, 34(3), 283–292. DOI: 10.1080/10426914.2018.1532584.
   Web of Science ®Google Scholar
• Chandramohan, D.; Marimuthu, K. A. Review on Natural Fibers. Int. J. Res. Rev. Appl. Sci. 2011, 8(2), 194–206.
   Google Scholar
• Vinayagamoorthy, R.; Rajmohan, T. Machining and Its Challenges on Bio-Fiber Reinforced Plastics: A Critical Review. J. Reinf. Plast. Compos. 2018, 37(16), 1037–1050. DOI: 10.1177/0731684418778356.
   Web of Science ®Google Scholar
• Çelik, Y. H.; Alp, M. S. Determination of Milling Performance of Jute and Flax Fiber Reinforced Composites. J. Nat. Fibers. 2020, 0478, 1–15. DOI: 10.1080/15440478.2020.1764435.
   Google Scholar
• Bhattacharyya, D.; Horrigan, D. P. W. A. Study of Hole Drilling in Kevlar Composites. Compos. Sci. Technol. 1998, 58(2), 267–283. DOI: 10.1016/S0266-3538(97)00127-9.
   Web of Science ®Google Scholar
• Nassar, M. M. A.; Arunachalam, R.; Alzebdeh, K. I. Machinability of Natural Fiber Reinforced Composites: A Review. Int. J. Adv. Manuf. Technol. 2017, 88(9–12), 2985–3004. DOI: 10.1007/s00170-016-9010-9.
   Web of Science ®Google Scholar
• Caggiano, A.;. Machining of Fibre Reinforced Plastic Composite Materials. Materials. 2018, 11(3), 442. DOI: 10.3390/ma11030442.
   PubMed Web of Science ®Google Scholar
• Meng, Q.; Cai, J.; Cheng, H.; Zhang, K. Investigation of CFRP Cutting Mechanism Variation and the Induced Effects on Cutting Response and Damage Distribution. Int. J. Adv. Manuf. Technol. 2020, 106(7–8), 2893–2907. DOI: 10.1007/s00170-019-04667-1.
   Web of Science ®Google Scholar
• Sekhar, R.; Singh, T. P. Mechanisms in Turning of Metal Matrix Composites: A Review. J. Mater. Res. Technol. 2015, 4(2), 197–207. DOI: 10.1016/j.jmrt.2014.10.013.
   Google Scholar
• Dash, S.; Nayak, R. K.; Routara, B. C. Process Parameter Optimization in Drilling Al2O3- and TiO2-filled GFRP Composites to Minimize Thrust Force and Delamination. Composite. 2016, 7(1), 1–16. DOI: 10.1615/CompMechComputApplIntJ.v7.i1.10.
   Google Scholar
• Palanikumar, K.;. Modeling and Analysis of Delamination Factor and Surface Roughness in Drilling GFRP Composites. Mater. Manuf. Process. 2010, 25(10), 1059–1067. DOI: 10.1080/10426910903575830.
   Web of Science ®Google Scholar
• Somsakova, Z.; Zajac, J.; Michalik, P.; Kasina, M. Machining of Wood Plastic Composite (Pilot Experiment). Mater. Plast. 2012, 1, 55–57.
   Google Scholar
• Babu, D.; Babu, K. S.; Gowd, B. U. M. Drilling Uni-Directional Fiber-Reinforced Plastics Manufactured by Hand Lay-Up Influence of Fibers. Am. J. Mater. Sci. Technol. 2012, 11, 1–12. DOI:10.7726/ajmst.2012.1001.
   Google Scholar
• Lotfi, A.; Li, H.; Dao, D. V. Machinability Analysis in Drilling Flax Fiber Reinforced Polylactic Acid Bio-Composite Laminates. Int. J. Min. Met. Mater. 2019, 13(9), 443–447. DOI: 10.5281/zenodo.3455743.
   Google Scholar
• Maleki, H. R.; Hamedi, M.; Kubouchi, M.; Arao, Y. Experimental Study on Drilling of Jute Fiber Reinforced Polymer Composites. J. Compos. Mater. 2019, 53(3), 283–295. DOI: 10.1177/0021998318782376.
   Web of Science ®Google Scholar
• Azmi, A. I.; Lin, R. J. T.; Bhattacharyya, D. Machinability Study of Glass Fibre-Reinforced Polymer Composites during End Milling. Int. J. Adv. Manuf. Technol. 2013, 64(1–4), 247–261. DOI: 10.1007/s00170-012-4006-6.
   Web of Science ®Google Scholar
• Babu, G. D.; Babu, K. S.; Gowd, B. U. M. Effect of Machining Parameters on Milled Natural Fiber-Reinforced Plastic Composites. J. Adv. Mech. Eng.. 2013, 1, 1–12. DOI: 10.7726/jame.2013.1001.
   Google Scholar
• Basavarajappa, S.; Venkatesh, A.; Gaitonde, V. N.; Karnik, S. R. Experimental Investigations on Some Aspects of Machinability in Drilling of Glass Epoxy Polymer Composites. J. Thermoplast. Compos. Mater. 2012, 25(3), 363–387. DOI: 10.1177/0892705711408166.
   Web of Science ®Google Scholar
• Tan, C. L.; Azmi, A. I. Analytical Study of Critical Thrust Force for On-Set Delamination Damage of Drilling Hybrid Carbon/Glass Composite. Int. J. Adv. Manuf. Technol. 2017, 92(1–4), 929–941. DOI: 10.1007/s00170-017-0152-1.
   Web of Science ®Google Scholar
• Razfar, M. R.; Zadeh, Z. M. R. Optimum Damage and Surface Roughness Prediction in End Milling Glass Fibre-Reinforced Plastics, Using Neural Network and Genetic Algorithm. P I Mech. Eng. B-J. Eng. 2009, 2236, 653–664. DOI:10.1243/09544054JEM1409.
   PubMed Web of Science ®Google Scholar
• Ho-Cheng, H.; Dharan, C. K. H. Delamination during Drilling in Composite Laminates. J. Manuf. Sci. Eng. Trans. ASME. 1990, 112(3), 236–239. DOI: 10.1115/1.2899580.
   Google Scholar
• Geng, D.; Liu, Y.; Shao, Z.; Lu, Z.; Cai, J.; Li, X.; Jiang, X.; Zhang, D. Delamination Formation, Evaluation and Suppression during Drilling of Composite Laminates: A Review. Compos. Struct. 2019, 216, 168–186. DOI: 10.1016/j.compstruct.2019.02.099.
   Web of Science ®Google Scholar
• Sheikh-Ahmad, J. Y.;. Machining of Polymer Composites; Springer: New York, 2009. DOI: 10.1007/978-0-387-68619-6.
   Google Scholar
• Hocheng, H.; Tsao, C. C. The Path Towards Delamination-Free Drilling of Composite Materials. J. Mater. Process. Technol. 2005, 167(2–3), 251–264. DOI: 10.1016/j.jmatprotec.2005.06.039.
   Web of Science ®Google Scholar
• König, W.; Wulf, C.; Graß, P.; Willerscheid, H. Machining of Fiber Reinforced Plastics. CIRP Ann. 1985, 34(2), 537–548. DOI: 10.1016/S0007-8506(07)60186-3.
   Google Scholar
• Bhattacharyya, D.; Allen, M. N.; Mander, S. J. Cryogenic Machining of Kevlar Composites. Mater. Manuf. Process. 1993, 8(6), 631–651. DOI: 10.1080/10426919308934871.
   Google Scholar
• Xu, W.; Zhang, L.; Wu, Y. Effect of Tool Vibration on Chip Formation and Cutting Forces in the Machining of Fiber-Reinforced Polymer Composites. Mach. Sci. Technol. 2016, 20(2), 312–329. DOI: 10.1080/10910344.2016.1168930.
   Web of Science ®Google Scholar
• Sheikh-Ahmad, J. Y.; Davim, J. P. Cutting and Machining of Polymer Composites. In Wiley Encyclopedia of Composites, 2nd ed.; Nicolias, L., Borzacchiello, A., Eds.; John Wiley & Sons: US, 2012; pp 648–657. DOI: 10.1002/9781118097298.weoc061.
   Google Scholar
• Davim, J. P.;, Ed.. Machinability of Fibre-Reinforced Plastics; De Gruyter: Berlin, 2015.
   Google Scholar
• Chen, Z.; Xu, Y.; Shivkumar, S. Microstructure and Tensile Properties of Various Varieties of Rice Husk. J. Sci. Food Agric. 2018, 98(3), 1061–1070.
   PubMed Web of Science ®Google Scholar