References
- Abbas, N. M.; Solomon, D. G.; Bahari, M. F. A. Review on Current Research Trends in Electrical Discharge Machining (EDM). Int. J. Mach. Tools Manuf. 2007, 47(7–8), 1214–1228.
- Shackelford, J. F.; Doremus, R. H. Ceramic and Glass Materials, Structure, Properties and Processing; Springer: Boston, MA, 2008.
- Konig, W.; Dauw, D. F.; Levy, G.; Panten, U.; Future, E. D. M. Steps Towards the Machining of Ceramics. CIRP Ann. 1988, 37(2), 623–631.
- Tani, T.; Fukuzawa, Y.; Mohri, N.; Saito, N.; Okada, M. Machining Phenomena in WEDM of Insulating Ceramics. J. Mater. Proc. Tech. 2004, 149, 124–128.
- Mohri, N.; Fukuzawa, Y.; Mohri, N.; Saito, N.; Furutani, K. Assisting Electrode Method for Machining Insulating Ceramics. ClRP Ann. 1996, 45(1), 201–204.
- Hou, P.; Guo, Y.; Shao, D.; Li, Z.; Wureli, Y.; Tang, L. Influence of Open-circuit Voltage on High-speed Wire Electrical Discharge Machining of Insulating Zirconia. Int. J. Adv. Manuf. Tech. 2014, 73, 229–239.
- Hanaoka, D.; Ito, R.; Fukuzawa, Y. Electrical Discharge Machined Surface of the Insulating ZrO2 Ceramics. J. Adv. Mech. Desig. Sys. Manuf. 2011, 5, 372–384.
- Lin, Y.-J.; Lin, Y.-C.; Wang, A.-C.; Wang, D.-A.; Chow, H.-M. Machining Characteristic of EDM for Non-conductive Ceramics Using Adherent Copper Foil. Adv. Mater. Res. 2011, 794–805.
- Ojha, N.; Hosel, T.; Muller, C.; Reinecke, H. Characterization of the Conductive Layer Formed during µ-electric Discharge Machining of Non-conductive Ceramics. Proces. Prop. Adv. Ceram. Comp. V (Ceram. Trans. Ser.). 2013, 240, 105–110.
- Muttamara, A.; Fukuzawa, Y.; Mohri, N.; Tani, T. Probability of Precision Micromachining of Insulating Si3N4. J. Mater. Proc. Tech. 2003, 140, 243–247.
- Fukuzawa, Y.; Mohri, N.; Tani, T.; Muttamara, A. Electrical Discharge Machining Properties of Noble Crystals. J. Mater. Proc. Tech. 2004, 149, 393–397.
- Guo, Y. F.; Bai, J. C.; Deng, G. Q.; Lu, Z. S. High Speed Wire Electrical Discharge Machining (HS-WEDM) Phenomena of Insulating Si3N4 Ceramics with Assisting Electrode. Key Engg. Mater. 2007, 339, 281–285.
- Hosel, T.; Muller, C.; Reinkencke, H. Spark Erosive Structuring of Electrically Nonconductive Zirconia. CIRP J. Manuf. Sci. Tech. 2011, 4, 357–361.
- Hosel, T.; Muller, C.; Reinkencke, H. Analysis of Surface Reaction Mechanisms on Electrically Non-Conductive Zirconia Occurring within the Spark Erosion Process Chain. Key Engg. Mater. 2012, 504, 1171–1176.
- Sabur, A.; Yeakub, M. A.; Maleque, A.; Kahn, A. A. Investigation of Material Removal Characteristics in EDM of Nonconductive ZrO2 Ceramic. Proc. Eng. 2013, 56, 696–701.
- Guo, Y.; Huo, P.; Shao, D.; Li, Z.; Wang, L.; Tang, L. High Speed Wire Electrical Discharge Machining of Insulating Zirconia with a Novel Assisting Electrode. Mater. Manuf. Proc. 2014, 29(5), 526–531.
- Banu, A.; Ali, M. Y.; Rahman, M. A. Micro-Electro Discharge Machining of Non-Conductive Zirconia Ceramic: Investigation of MRR and Recast Layer Hardness. Int. J. Adv. Manuf. Tech. 2014, 75(1–4), 257–267.
- Shinde, B. D.; Pawade, R. S. Experimental Investigations in EDM of Low Electrical Conductive 92.7% Al2O3 Ceramic. Int. J. Engg. Sci. Tech. 2017, 9, 97–102.
- Mohri, N.; Fukuzawa, Y.; Tani, T.; Sata, T. Some Considerations to Machining Characteristics of Insulating Ceramics -towards Practical Use in Industry. CIRP Ann. 2002, 51(1), 161–164.
- Muttamara, A.; Fukuzawab, Y.; Mohri, N.; Tani, T. Effect of Electrode Material on Electrical Discharge Machining of Alumina. J. Mater. Proc. Tech. 2009, 209, 2545–2552.
- Ji, R.; Liu, Y.; Zhang, Y.; Wang, F.; Cai, B.; Fu, X. Single Discharge Machining Insulating Al2O3Ceramic with High Instantaneous Pulse Energy in Kerosene. Mater. Manuf. Proc. 2012, 27, 676–682.
- Guo, Y.; Wang, L.; Zhang, G.; Hou, P. Multi-Response Optimization of the Electrical Discharge Machining of Insulating Zirconia. Mater. Manuf. Proc. 2017, 32(3), 294–301.