Weaving technique applied in submerged arc welding process: metallurgical analysis

References

• Xu, J.; Chen, L.; Zhang, M.; Wu, Y. Butt Welding and Measurement System of Twin-wire Submerged Arc Welding of Thick A105 Steel Plate. Hanjie Xuebao 2006, 27(8), 95.
   Google Scholar
• Sharma, A.; Arora, N.; Mishra, B. K. Statistical Modeling of Deposition Rate in Twin-wire Submerged Arc Welding. Proc. Inst. Mech. Eng. B. 2009, 223(7), 851–863. DOI: 10.1243/09544054JEM1342.
   Web of Science ®Google Scholar
• Huo, G. R.; Zhu, B. K.; Yao, R. G. Relation of Welding Parameters and Bead Appearance in Twin-Wire SAW. Hot Work. Technol. 2007, 36(15), 27–30.
   Google Scholar
• Tušek, J.;. Mathematical Modeling of Melting Rate in Twin-wire Welding. J. Mater. Process. Technol. 2000, 100(1–3), 250–256. DOI: 10.1016/S0924-0136(99)00485-9.
   Web of Science ®Google Scholar
• Lafdani, M. K.; Ghadiri, Z. E.; Galloway, A. M. Optimization Study of Weld Geometry in the Tandem Submerged Arc Welding Process. Proc. Inst. Mech. Eng. B. 2015, 229(6), 1068–1077. DOI: 10.1177/0954405414535578.
   Web of Science ®Google Scholar
• Kiran, D. V.; Basu, B.; Shah, A. K.; Mishra, S.; De, A. Three-dimensional Heat Transfer Analysis of Two Wire Tandem Submerged Arc Welding. ISIJ Int. 2011, 51(5), 793–798. DOI: 10.2355/isijinternational.51.793.
   Web of Science ®Google Scholar
• Cho, D. W.; Kiran, D. V.; Na, S. J. Analysis of the Flux Consumption and Metal Transfer for Tandem Submerged Arc Welding Process under Iso-heat Input Condition. Weld. J. 2015, 94(1), 396–401.
   Google Scholar
• Park, S. J.; Nam, S. K.; Kweon, C. G. Prediction of Weld Penetration and Deposited Metal Area in Accordance with Weld Parameters in Tandem Submerged Arc Welding Process. J. Weld. Joining. 2011, 29(6), 71–76. DOI: 10.5781/KWJS.2011.29.6.691.
   Google Scholar
• Wang, J.; Zhu, J.; Fu, P.; Su, R.; Han, W.; Yang, F. A. Swing Arc System for Narrow Gap GMA Welding. ISIJ Int. 2012, 52(1), 110–114. DOI: 10.2355/isijinternational.52.110.
   Web of Science ®Google Scholar
• Kang, Y. H.; Na, S. J. Characteristics of Welding and Arc Signal in Narrow Groove Gas Metal Arc Welding Using Electromagnetic Arc Oscillation. Weld. J. 2003, 82(5), 93–99.
   Web of Science ®Google Scholar
• Tasalloti, H.; Kah, P.; Martikainen, J. Effects of Welding Wire and Torch Weaving on GMAW of S355MC and AISI 304L Dissimilar Welds. Int. J. Adv. Manuf. Technol. 2014, 71(1–4), 197–205. DOI: 10.1007/s00170-013-5484-x.
   Web of Science ®Google Scholar
• Lara, M.; Díaz, V. V.; Camus, M.; Cunha, T. V. Effect of Transverse Arc Oscillation on Morphology, Dilution and Microstructural Aspects of Weld Beads Produced with Short-circuiting Transfer in GMAW. J. Braz. Soc. Mech. Sci. Eng. 2020, 42(9), 1–13. DOI: 10.1007/s40430-020-02533-w.
   Web of Science ®Google Scholar
• Biradar, N. S.;. Effect of Transverse Mechanical Arc Oscillation on Hot Cracking (Solidification & Liquation) and Weld Metal Properties of AA2014 T6 TIG Welds. AIMS Mater. Sci. 2016, 3(4), 1544–1560. DOI: 10.3934/matersci.2016.4.1544.
   Web of Science ®Google Scholar
• Biradar, N. S.; Raman, R. Investigation of Hot Cracking Behavior in Transverse Mechanically Arc Oscillated Autogenous AA2014 T6 TIG Welds. Metall. Mater. Trans. A. 2012, 43(9), 3179–3191. DOI: 10.1007/s11661-012-1126-4.
   Google Scholar
• Flores, I. G.; Arista, B. V.; Dominguez, J. J. G.; Gonzalez, C. E. C.; Albarran, M. A. G.; Villasana, J. P. Effect of Torch Weaving on the Microstructure, Tensile and Impact Resistances, and Fracture of the HAZ and Weld Bead by Robotic GMAW Process on ASTM A36 Steel. Rev. Soldagem Inspecao. 2017, 22(1), 72–86. DOI: 10.1590/0104-9224/si2201.08.
   Web of Science ®Google Scholar
• Yuan, T.; Luo, Z.; Kou, S. Grain Refining of Magnesium Welds by Arc Oscillation. Acta Mater. 2016, 116(1), 166–176. DOI: 10.1016/j.actamat.2016.06.036.
   Google Scholar
• Yuan, T.; Luo, Z.; Kou, S. Mechanism of Grain Refining in AZ91 Mg Welds by Arc Oscillation. Sci. Technol. Weld. Joining. 2016, 22(2), 97–103. DOI: 10.1080/13621718.2016.1199127.
   Web of Science ®Google Scholar
• Mahajan, S.; Biradar, N. S.; Raman, R.; Mishra, S. Effect of Mechanical Arc Oscillation on the Grain Structure of Mild Steel Weld Metal. Trans. Indian Inst. Met. 2012, 65(2), 171–177. DOI: 10.1007/s12666-012-0118-9.
   Web of Science ®Google Scholar
• Kim, Y.; Rhee, S. A. Study of Heat Input Distribution on the Surface during Torch Weaving in Gas Metal Arc Welding. JSME Int. J., Ser. A. 2005, 48(3), 144–150. DOI: 10.1299/jsmea.48.144.
   Web of Science ®Google Scholar
• Hu, J. F.; Yang, J. G.; Fang, H. Y.; Li, G. M.; Zhang, Y. Numerical Simulation on Temperature and Stress Fields of Welding with Weaving. Sci. Technol. Weld. Joining. 2006, 11(3), 358–365. DOI: 10.1179/174329306X124189.
   Web of Science ®Google Scholar
• Cunha, T. V.; Ribeiro, H. O. Avaliação Do Uso Do Tecimento Na Soldagem a Arco Submerso. Rev. Soldagem Inspecao. 2018, 23(1), 73–82. DOI: 10.1590/0104-9224/si2301.08.
   Google Scholar