Austempering and Cryogenic treatment of Vanadium modified Carbidic Ductile Iron

References

• Sebastián, L.; Jorge, S.; Dommarco Ricardo, C. Wear Behavior of CADI Operating under Different Tribosystems. ISIJ Int. 2010, 50(3), 418–424. DOI: 10.2355/isijinternational.50.418.
   Web of Science ®Google Scholar
• Alejandro, B.; Sebastian, L.; Dommarco Ricardo, C. Wear Behavior of Carbidic Ductile Iron with Different Matrices and Carbide Distribution. Tribol. Trans. 2013, 56(1), 33–40. DOI: 10.1080/10402004.2012.725149.
   Web of Science ®Google Scholar
• Brandon, W.;. Carbidic Austempered Ductile Iron. Int. J. Metalcast. 2015, 9(1), 73–75. DOI: 10.1007/BF03355605.
   Google Scholar
• Barnabas, A. A.; Oyetunji, A.; Seidu, S. O.; Adediran, A. A.; Carbidic Austempered Ductile Iron an Off-spring of Cast Iron for Production of Agricultural Implement: A Review. J. Environ. Sci. Technol. 2019, 121, 10–16. DOI:10.3923/jest.2019.10.16.
   Google Scholar
• Lagarde, M.; Basso, A.; Sikora, J. A.; Dommarco, R. C. Development and Characterization of a New Type of Ductile Iron with a Novel Multiphase Microstructure. ISIJ Int. 2011, 51(4), 645–650. DOI: 10.2355/isijinternational.51.645.
   Web of Science ®Google Scholar
• Hayrynen, K. L.; Brandenberg, K. R.; Carbidic Austempered Ductile Iron (CADI) – The New Wear Material, Trans. AFS, 2003, 111 Paper No 03-088, 845-850.
   Google Scholar
• Cheng, H. Q.; Fu, H. G.; Lin, J.; Lei, Y. Effect of Cr Content on Microstructure and Mechanical Properties of Carbidic Austempered Ductile Iron. Materialprufung. 2018, 60, 31–39. DOI: 10.3139/120.111114.
   Web of Science ®Google Scholar
• Han, C. F.; Wang, Q. Q.; Sun, Y. F.; Li, J. Effects of Molybdenum on the Wear Resistance and Corrosion Resistance of Carbidic Austempered Ductile Iron. Metallogr. Microstruct. Anal. 2015,4, 298–304. DOI: 10.1007/s13632-015-0215-3.
   Google Scholar
• Yang, P. H.; Fu, H. G.; Nan, R.; Guo, X. Y.; Lin, J.; Lei, Y. P. Effect of Ti Modification on Microstructures and Properties of Carbidic Austempered Ductile Iron. J. Mater. Eng. Perform. 2019, 28(4), 2335–2347. DOI: 10.1007/s11665-019-03986-4.
   Web of Science ®Google Scholar
• Pimentel Amanda,; Oliveira, S.; Luiz, G. W.; William Jose’ Rodrigues, C. S.; Portella, P. D.; Woydt, M.; Burbank, J. Abrasive Wear Behavior of Austempered Ductile Iron with Niobium Additions. Wear. 2019, 440–441. DOI: 10.1016/j.wear.2019.203065.
   Web of Science ®Google Scholar
• Chen, X.; Xu, J.; Hu, H.; Mohrbacher, H.; Kang, M.; Zhang, W.; Guo, A.; Zhai, Q. Effects of Niobium Addition on Microstructure and Tensile Behavior of As-cast Ductile Iron. Mater. Sci. Eng. 2017, 688, 416–428. DOI: 10.1016/j.msea.2017.01.032.
   Google Scholar
• Penghui, Y.; Hanguang, F.; Xingye, G.; Bennacer, R.; Jian, L. Mechanism of NbC as Heterogeneous Nucleus of M3C in CADI: First Principle Calculation and Experiment Research. J. Mater. Res. Technol. 2020, 9(3), 3109–3120. DOI: 10.1016/j.jmrt.2020.01.056.
   Google Scholar
• Penghui, Y.; Hanguang, F.; Jian, L.; Haiqiang, C.; Yongping, L.; Experimental and Ab Initio Study of the Influence of a Compound Modifier on Carbidic Ductile Iron. Metall. Res. Technol.. 2019, 1163, 306. DOI:10.1051/metal/2018124.
   Google Scholar
• Han, C.; Sun, Y. F.; Wu, Y.; Ma, Y. H. Effects of Vanadium and Austempering Temperature on Microstructure and Properties of CADI. Metallogr. Microstruct. Anal. 2015, 4(3), 135–145. DOI: 10.1007/s13632-015-0197-1.
   Web of Science ®Google Scholar
• Muhammad Yusof, K.; Abdullah, B.; Idham, M. F.; Saad, N. H. The Effects on Microstructure and Hardness of 0.28 % Vanadium and 0.87 % Nickel Alloyed Ductile Iron after Boronizing Process. Key Eng. Mater. 2017, 740, 65–69. DOI: 10.4028/.scientific.net/KEM.740.65.
   Google Scholar
• Cheng, H. Q.; Fu, H. G.; Ma, S. Q.; Lin, J.; Lei, Y. P. Effects of Austenitizing Process on Microstructures and Properties of Carbidic Austempered Ductile Iron. Mater. Res. Express. 2019, 6(1), 016522. DOI: 10.1088/2053-1591/aae44c.
   Web of Science ®Google Scholar
• Liu, J.-H.; Xiong, P.; Bin-guo, F.; Yang, W.-T.; Zhao, X.-B.; Han, Z.-A.; Guo-lu, L. Effects of Austempering Temperature on Microstructure and Surface Residual Stress of Carbidic Austempered Ductile Iron (CADI) Grinding Balls. China Foundry. 2018, 15(3), 173–181. DOI: 10.1007/s41230-018-7245-9.
   Web of Science ®Google Scholar
• Nan, R.; Fu, H.; Yang, P.; Lin, J.; Guo, X. Microstructure Evolution and Wear Resistance of Cu-Bearing Carbidic Austempered Ductile Iron after Austempering. J. Mater. Eng. Perform. 2020, 29(4), 2440–2459. DOI: 10.1007/s11665-020-04788-9.
   Web of Science ®Google Scholar
• Nan, R.; Fu, H. G.; Ma, S. Q.; Yang, P. H.; Lin, J.; Guo, X. Y.; Lei, Y. P.; Microstructure and Properties of Cu-Bearing Carbidic Austempered Ductile Iron. Int. J. Mater. Res. 2019, 110(7), 621–635. https://doiorg/10.3139/146.111787
   Web of Science ®Google Scholar
• Nan, R.; Fu, H. G.; Yang, P. H.; Lin, J.; Lei, Y. P.; Effect of Austenitizing Temperature on the Microstructure Evolution and Properties of Cu-Bearing CADI. Mater. Test. 2019, 619, 865–874. DOI:10.3139/120.111394.
   Google Scholar
• Dakre, V.; Peshwe, D. R.; Pathak, S. U.; Likhite, A. Effect of Austenitization Temperature on Microstructure and Mechanical Properties of Low-Carbon-Equivalent Austempered Carbidic Ductile Iron. Int. J. Miner. Metall. Mater. 2018, 25(7), 770–778. DOI: 10.1007/s12613-018-1625-4.
   Google Scholar
• Penghui, Y.; Hanguang, F.; Guolu, L.; Jinhai, L.; Xuebo, Z. Microstructures and Properties of Carbidic Austempered Ductile Iron Containing Fe3C Particles and Superfine Ausferrite. Mater. Des. 2020, 186, 108363. DOI: 10.1016/j.matdes.2019.108363.
   Web of Science ®Google Scholar
• Collins, D. N.;; Cryogenic Treatment Deep Cryogenic Treatment of Tool Steels: A Review November 2008. Intl. Heat Treat. Surface Eng. 2008, 23–4, 147–149. DOI:10.1179/174951508X446367.
   Google Scholar
• Das, D.; Dutta, A. K.; Toppo, V.; Ray, K. K. Effect of Deep Cryogenic Treatment on the Carbidic Precipitation and Tribological Behavior of D2 Steel. Mater. Manuf. Process. 2007, 22(4), 474–480. DOI: 10.1080/10426910701235934.
   Web of Science ®Google Scholar
• Vimal, A.; Bensely, J. A.; Mohan Lal, D.; Srinivasan, K. Deep Cryogenic Treatment Improves Wear Resistance of En 31 Steel. Mater. Manuf. Process. 2008, 23(4), 369–376. DOI: 10.1080/10426910801938098.
   Web of Science ®Google Scholar
• Kalsi, N. S.; Rakesh Sehgal, V. S.; Sharma. Cryogenic Treatment of Tool Materials: A Review. Mater. Manuf. Process. 2010, 25(10), 1077–1100. 2010. DOI: 10.1080/10426911003720862.
   Web of Science ®Google Scholar
• Arockia, M.; Mohan Lal, D. Optimization of the Cryogenic Treatment Process for En 52 Valve Steel Using Grey-Taguchi Method. Mater. Manuf. Process. 2010, 25(8), 842–850. DOI: 10.1080/10426910903536766.
   Web of Science ®Google Scholar
• Senthilkumar, D.; Rajendran, I. Optimization of Deep Cryogenic Treatment to Reduce Wear Loss of 4140 Steel. Mater. Manuf. Process. 2012, 27(5), 567–572. DOI: 10.1080/10426914.2011.593237.
   Web of Science ®Google Scholar
• Das, D.; Dutta, A. K.; Ray, K. K. On the Refinement of Carbide Precipitates by Cryotreatment in AISI D2 Steel, Philosophical Magazine. 2009, 89(1), 55–76. DOI: 10.1080/14786430802534552.
   Google Scholar
• Shaohong, L.; Min, N.; Junwan, L.; Xiaochun, W.; Chenhui, L.; Leilei, T. Experimental Verification of Segregation of Carbon and Precipitation of Carbides Due to Deep Cryogenic Treatment for Tool Steel by Internal Friction Method. Mater. Sci. Eng. A. 2013, 575, 51–60. DOI: 10.1016/j.msea.2013.03.070.
   Web of Science ®Google Scholar
• Katoch, S.; Singh, V.; Sehgal, R.; Mechanical Properties and Microstructure Evaluation of Differently Cryogenically Treated AISI-H11 Steel. Int. J. Steel Struct.. 2019, 195, 1381–1392. DOI:10.1007/s13296-019-00216-4.
   Google Scholar
• KatochSanjeev,; Rakesh, S.; Kumar, G. M.; Mozammel, M.; Iulian, P. C. Improvement of Tribological Behavior of H-13 Steel by Optimizing the Cryogenic-treatment Process Using Evolutionary Algorithms. Tribol. Intl.. 2019, 140, 105895. DOI: 10.1016/j.triboint.2019.105895.
   Google Scholar
• Yao, Y.; Zhou, Y. Effects of Deep Cryogenic Treatment on Wear Resistance and Structure of GB 35CrMoV Steel. Metals. 2018, 8(7), 502. DOI: 10.3390/met8070502.
   Web of Science ®Google Scholar
• Ray, K. K.; Das, D. Improved Wear Resistance of Steels by Cryotreatment: The Current State of Understanding. Mater. Sci. Technol. 2017, 33(3), 340–354. DOI: 10.1080/02670836.2016.1206292.
   Web of Science ®Google Scholar
• Singla, A. K.; Singh, J.; Sharma, V. Processing of Materials at Cryogenic Temperature and Its Implications in Manufacturing: A Review. Mater. Manuf. Process. 1603-1640, 33, 15. 2018. DOI: 10.1080/10426914.2018.1424908.
   Google Scholar
• Putatunda, S.; Martis, C.; Papp, R.; Diekman, F.; The Effect of Cryogenic Processing on the Mechanical Properties of Austempered Ductile Cast Iron (ADI), Proceedings of the 26th ASM Heat Treating Society Conference, Cincinnati, Ohio, 2011, 44–49.
   Google Scholar
• Panneerselvam, S.; Martis, C. J.; Putatunda, S. K.; Boileau, J. M. An Investigation on the Stability of Austenite in Austempered Ductile Cast Iron (ADI). Mater. Sci. Eng. A. 2015, 626, 237–246. DOI: 10.1016/j.msea.2014.12.038.
   Web of Science ®Google Scholar
• Sanja Sˇ, O.; Matjazˇ, G.; Zdravko, S.; Donik Cˇ, R. Improvement in Abrasion Wear Resistance and Microstructural Changes with Deep Cryogenic Treatment of Austempered Ductile Cast Iron (ADI). Metall. Mater. Trans. A. 2016, 47(10), 5058–5070. DOI: 10.1007/s11661-016-3659-4.
   Google Scholar
• Junjun, C.; Liqing, C. Microstructure and Abrasive Wear Resistance of an Alloyed Ductile Iron Subjected to Deep Cryogenic and Austempering Treatments. J. Mater. Sci. Technol. 2017, 33(12), 1549–1554. DOI: 10.1016/j.jmst.2017.08.003.
   Web of Science ®Google Scholar
• Liqing, C.; Junjun, C.; Weiping, T.; Effect of Deep Cryogenic Treatment and Tempering on Microstructure and Mechanical Behaviors of a Wear-resistant Austempered Alloyed Bainitic Ductile Iron, MATEC Web of Conferences, Glasgow, UK,2015, 21, 08008.10.1051/matecconf/20152108008.
   Google Scholar
• Da Silva, A. J. S. T.; De Campos, M. F.; Nishikawa, A. S.; Guessur, W. L.; Goldenstein, H.; Quenching and Partitioning Process in Ductile Cast Irons, 10th International Symposium on the Science and Processing of Cast Iron – SPCI10, Argentina, November 2014. ISBN-978-987-45833-0-7.
   Google Scholar