References
- Chattopadhyay, A. B.; Bose, A.; Chattopadhyay, A. K. Improvements in Grinding Steels by Cryogenic Cooling. Precis. Eng. 1985, 7(2), 93–98. DOI: 10.1016/0141-6359(85)90098-4.
- Suresh, P.; McDonald, S. D.; Dargusch, M. S. Effects of Coolant Pressure on Chip Formation while Turning Ti-6A1-4V Alloy. Int. J. Mach. Tools Manuf. 2009, 49, 739–743. DOI: 10.1016/j.ijmachtools.2009.02.010.
- Dhar, N. R.; Paul, S.; Chattopadhyay, A. B. Machining of AISI 4140 Steel under Cryogenic Cooling - Tool Wear, Surface Roughness and Dimensional Deviation. J. Mate. Process. Technol. 2002, 123, 483–489. DOI: 10.1016/S0924-0136(02)00134-6.
- Jebaraj, M.; Kumar, M. P.; Yuvaraj, N.; Rahman, G. M. Experimental Study of the Influence of the Process Parameters in the Milling of Al6082-T6 Alloy. Mater. Manuf. Processes. 2019, 34(12), 1411–1427. DOI: 10.1080/10426914.2019.1594271.
- Jerold, D.; Kumar, M. P. Machining of AISI 316 Stainless Steel under Carbon-Di-Oxide Cooling. Mater. Manuf. Processes. 2012, 27(10), 1059–1065. DOI: 10.1080/10426914.2011.654153.
- Elanchezhian, J.; Kumar, M. P. Effect of Nozzle Angle and Depth of Cut on Grinding Titanium under Cryogenic CO2. Mater. Manuf. Processes. 2018, 33(13), 1466–1470. DOI: 10.1080/10426914.2018.1453151.
- De Chiffre, L.; Andrease, J. L.; Lagerberg, S.; Theesken, I. B. Performance Testing of Cryogenic CO2 as Cutting Fluid in Parting/Grooving and Threading Austenitic Stainless Steel. CIRP Annal. 2007, 56(1), 101–104. DOI: 10.1016/j.cirp.2007.05.026.
- Liu, J.; Kevinchou, Y. On Temperatures and Tool Wear in Machining Hypereutectic Al–Si Alloys with Vortex-Tube Cooling. Int. J. Mach. Tool. Manu. 2007, 47(3–4), 635–645. DOI: 10.1016/j.ijmachtools.2006.04.008.
- Cakir, O.; Kiyak, M.; Altan, E. Comparison of Gases Applications to Wet and Dry Cuttings in Turning. J. Mate. Process. Technol. 2004, 153–154, 35–41. DOI: 10.1016/j.jmatprotec.2004.04.190.
- Mayer, P.; Robert, S.; Marek, S.; Dietmar, E.; Jan, C. A. Deformation Induced Surface Hardening When Turning Metastable Austenitic Steel AISI 347 with Different Cryogenic Cooling Strategies. Procedia CIRP. 2014, 14, 101–106. DOI: 10.1016/j.procir.2014.03.097.
- Klocke, F.; Dieter, L.; Alexander, K.; Tolga, C.; Hubertus, S. S. Potential of Modern Lubricoolant Strategies on Cutting Performance. Key Engg. Mate. 2013, 554–557, 2062–2071. DOI: 10.4028/.scientific.net/KEM.554-557.2062.
- Jebaraj, M.; Kumar, M. P.; Yuvaraj, N.; Anburaj, R. Investigation of Surface Integrity in End Milling of 55NiCrMoV7 Die Steel under the Cryogenic Environments. Mach. Sci. Technol. 2020, 24(3), 465–488. DOI: 10.1080/10910344.2019.1698612.
- Khanna, N.; Shah, P.; Chetan. Comparative Analysis of Dry, Flood, MQL and Cryogenic CO2 Techniques during the Machining of 15-5-PH SS Alloy. Tribol. Int. 2020, 146, 106196. DOI: 10.1016/j.triboint.2020.106196.
- Tapoglou, N.; Lopez, M. I. A.; Cook, I.; Taylor, C. M. Investigation of the Influence of CO2 Cryogenic Coolant Application on Tool Wear. Procedia CIRP. 2017, 63, 745–749. DOI: 10.1016/j.procir.2017.03.351.
- Ahmed, M. I.; Ismail, A. F.; Abakr, Y. A.; Amin, A. K. M. N. Effectiveness of Cryogenic Machining with Modified Tool Holder. J. Mate. Process. Technol. 2007, 185(1–3), 91–96. DOI: 10.1016/j.jmatprotec.2006.03.123.
- Singla, A. K.; Singh, J.; Sharma, V. S. Processing of Materials at Cryogenic Temperature and Its Implications in Manufacturing: A Review. Mater. Manuf. Processes. 2018, 33(15), 1603–1640. DOI: 10.1080/10426914.2018.1424908.
- Jebaraj, M.; Kumar, M. P. Effect of Cryogenic CO2 and LN2 Coolants in Milling of Aluminum Alloy. Mater. Manuf. Processes. 2019, 34(5), 511–520. DOI: 10.1080/10426914.2018.1532591.
- Jawahir, I. S.; Attia, H.; Biermann, D.; Duflou, J.; Klocke, F.; Meyer, D.; Newman, S. T.; Pusavec, F.; Putz, M.; Rech, J.; et al. Cryogenic Manufacturing Processes. CIRP Ann. Manu. Technol. 2016, 65(2), 713–736. DOI: 10.1016/j.cirp.2016.06.007.