References
- Ravikant; Dhami, S. S. Spectroscopy Analysis and Confirmation of EN31 Steel. Jusst. 2021, 23, 304–306. DOI: https://doi.org/10.51201/Jusst12620.
- Natarajan, Y.; Murugesan, P. K.; Mohan, M.; Khan, S. A. L. A. Abrasive Water Jet Machining Process: A State of Art of Review. J. Manuf. Process. 2020, 49, 271–322. DOI: https://doi.org/10.1016/j.jmapro.2019.11.030.
- Dubey, G.; Dutta, V. Optimization of Process Parameters for Rotary EDM Using EN31 Tool Steel: Present and Future Scope. Int. J. sci. 2017, 4, 81–84. DOI: https://doi.org/10.1088/1757-899X/330/1/012071.
- Hashish, M.;. Optimization Factors in Abrasive-waterjet Machining. J. Manuf. Sci. Eng. 2008, 113, 29. DOI: https://doi.org/10.1115/1.2899619.
- Kechagias, J.; Petropoulos, G.; Vaxevanidis, N. Application of Taguchi Design for Quality Characterization of Abrasive Water Jet Machining of TRIP Sheet Steels. Int. J. Adv. Manuf. 2012, 62, 635–643. DOI: https://doi.org/10.1007/s00170-011-3815-3.
- Kale, A.; Singh, S. K.; Sateesh, N.; Subbiah, R. A Review on Abrasive Water Jet Machining Process and Its Process Parameters. Mater. Today. 2020, 26, 1032–1036. DOI: https://doi.org/10.1016/j.matpr.2020.01.309.
- Jeykrishnan, J.; Ramnath, B. V.; Vignesh, S. S.; Sridharan, P.; Saravanan, B. Optimization of Process Parameters in Abrasive Water Jet Machining/Cutting (AWJM) of Nickel Alloy Using Traditional Analysis to Minimize Kerf Taper Angle. Mater. Today. 2019, 16, 392–397. DOI: https://doi.org/10.1016/j.matpr.2019.05.106.
- Abhang, L. B.; Hameedullah, M. Parametric Investigation of Turning Process on En-31 Steel. Procedia Manuf. 2014, 6, 1516–1523. DOI: https://doi.org/10.1016/j.mspro.2014.07.132.
- Kumar, R.; Banwait, S. S. Experimental Investigation of Different Additives Used for Surface Modification of EN31 Steel by EDM Process. Am. J. Mech. Eng. 2016, 226–235. DOI: https://doi.org/10.12691/ajme-4-6-4.
- Manimaran, G.; Kumar, M. P. Investigation of Cooling Environments in Grinding EN 31 Steel. Mater. Manuf. Process. 2013, 28, 424–429. DOI: https://doi.org/10.1080/10426914.2013.763957.
- Rajaparthiban, J.; Ravichandran, M.; Stalin, B.; Kumar, P. R.; Mohanavel, V. Machining of EN31 Steel Using Carbide Insert– A Statistical Approach. Mater. Today. 2020, 22, 2559–2564. DOI: https://doi.org/10.1016/j.matpr.2020.03.386.
- Ribeiro, J. E.; César, M. B.; Lopes, H. Optimization of Machining Parameters to Improve the Surface Quality. Procedia Struct. Integr. 2017, 5, 355–362. DOI: https://doi.org/10.1016/j.prostr.2017.07.182.
- Venkata, A. K. G.; Vishnu, V. R. D.; Nakka, N. Multi-Objective Optimization of End Milling Process Parameters in Machining of EN 31 Steel: Application of AHP Embedded with VIKOR and WASPAS Methods. Mech. Eng. J. 2018, 8, 39–46. DOI: https://doi.org/10.26634/jme.8.4.14676.
- Faisal, N.; Kumar, K. Optimization of Machine Process Parameters in EDM for EN 31 Using Evolutionary Optimization Techniques. Technologies. 2018, 6, 54. DOI: https://doi.org/10.3390/technologies6020054.
- Armağan, M.; Arici, A. A. Cutting Performance of Glass-vinyl Ester Composite by Abrasive Water Jet. Mater. Manuf. Process. 2017, 32, 1715–1722. DOI: https://doi.org/10.1080/10426914.2016.1269919.
- Kumar, K. R.; Sreebalaji, V. S.; Pridhar, T. Characterization & Optimization of Abrasive Water Jet Machining Parameters of Aluminium/tungsten Carbide Composites. Measurement. 2018, 117, 57–66. DOI: https://doi.org/10.1016/j.measurement.2017.11.059.
- Bhandarkar, V.; Singh, V.; Gupta, T. V. K. Experimental Analysis and Characterization of Abrasive Water Jet Machining of Inconel 718. Mater. Today. 2020, 23, 647–650. DOI: https://doi.org/10.1016/j.matpr.2019.04.227.
- Kumar, S.; Ghoshal, S. K.; Arora, P. K.; Nagdeve, L. Multi-variable optimization in die-sinking EDM process of AISI420 stainless steel. Mater. Manuf. Process. 2020, 36, 572-582. DOI: https://doi.org/10.1080/10426914.2020.1843678.