References
- Chen, Y.; Guo, Y.; Lu, B.; Xu, M.; Xu, J. Microstructure and Properties of the Interface Area in the Laser Cladded Ni Based Coatings on the 1Cr10Mo1NiWVNbN Steel. Metals. 2017, 7(175), 1–9. DOI: https://doi.org/10.3390/met7050175.
- Chamanfar, A.; Jahazi, M.; Cormier, J. A. Review on Inertia and Linear Friction Welding of Ni-Based Superalloys. Metall. Mater. Trans. A. 2015, 46, 1639–1669. DOI: https://doi.org/10.1007/s11661-015-2752-4.
- Zeng, C.; Tian, W.; He, W.; Hua, L. Microstructure and Porosity Evaluation in Laser-cladding Deposited Ni-based Coatings. Surf. Coat. Technol. 2016, 294, 122–130. DOI: https://doi.org/10.1016/j.surfcoat.2016.03.083.
- Vilar, R.; Almeida, A. Repair and Manufacturing of Single Crystal Ni-based Superalloys Components by Laser Repair and Manufacturing of Single Crystal Ni-based Superalloys Components by Laser Powder Deposition — A Review. J. Laser Appl. 2016, 27, S17004. DOI: https://doi.org/10.2351/1.4862697.
- Wang, X.; Deng, D.; Qi, M.; Zhang, H. Influences of Deposition Strategies and Oblique Angle on Properties of AISI316L Stainless Steel Oblique Thin-walled Part by Direct Laser Fabrication. Opt. Laser Technol. 2016, 80, 138–144. DOI: https://doi.org/10.1016/j.optlastec.2016.01.002.
- Shu, D.; Li, Z.; Zhang, K.; Yao, C.; Li, D.; Dai, Z. In Situ Synthesized High Volume Fraction WC Reinforced Ni-based Coating by Laser Cladding. Mater. Lett. 2017, 195, 178–181. DOI: https://doi.org/10.1016/j.matlet.2017.02.076.
- Liu, H.; Hu, Z.; Qin, X.; Wang, Y.; Zhang, J. Parameter Optimization and Experimental Study of the Sprocket Repairing Using Laser Cladding. Int. J. Adv. Manuf. Technol. 2017, 91, 3967–3975. DOI: https://doi.org/10.1007/s00170-017-0066-y.
- Naghiyan, M.; Shoja-razavi, R.; Allah, H.; Jamali, H. Microstructure Investigation of Inconel 625 Coating Obtained by Laser Cladding and TIG Cladding Methods. Surf. Coat. Technol. 2018, 353, 25–31. DOI: https://doi.org/10.1016/j.surfcoat.2018.08.061.
- Qian, D.; Zhang, A.; Zhu, J.; Li, Y.; Zhu, W.; Qi, B.; Tamura, N.; Li, D.; Chen, K. Hardness and Microstructural Inhomogeneity at the Epitaxial Interface of Laser 3D-printed Ni-based Superalloy. Appl. Phys. Lett. 2016, 109(10), 101907. DOI: https://doi.org/10.1063/1.4962485.
- Teomete, E.; Dimas, L. S.; Buehler, M. J. Study on Pores and Crack Sensitivity of Ni- Based Composite Coating by Laser Cladding Study on Pores and Crack Sensitivity of Ni-based Composite Coating by Laser Cladding. PCM 2015 2015, 87, 012096. DOI: https://doi.org/10.1088/1757-899X/87/1/012096.
- Wen, P.; Cai, Z.; Feng, Z.; Wang, G. Microstructure and Mechanical Properties of Hot Wire Laser Clad Layers for Repairing Precipitation Hardening Martensitic Stainless Steel. Opt. Laser Technol. 2015, 75, 207–213. DOI: https://doi.org/10.1016/j.optlastec.2015.07.014.
- Li, Y.; Chen, K.; Tamura, N. Mechanism of Heat Affected Zone Cracking in Ni-based Superalloy DZ125L Fabricated by Laser 3D Printing Technique. Mater. Des. 2018, 150, 171–181. DOI: https://doi.org/10.1016/j.matdes.2018.04.032.
- Yu, T.; Zhao, Y.; Sun, J.; Chen, Y.; Qu, W. Process Parameters Optimization and Mechanical Properties of Forming Parts by Direct Laser Fabrication of YCF101 Alloy. J. Mater. Process. Technol. 2018, 262, 75–84. DOI: https://doi.org/10.1016/j.jmatprotec.2018.06.023.
- Zhao, Y.; Yu, T.; Sun, J.; Xi, W.; Bi, X. Effect of Laser Cladding on Forming Qualities of YCF101 Alloy Powder in the Different Lap Joint Modes. Int. J. Adv. Manuf. Technol. 2018, 96, 1991–2001. DOI: https://doi.org/10.1007/s00170-018-1732-4.
- Ren, K.; Chew, Y.; Fuh, J. Y. H.; Zhang, Y. F.; Bi, G. J. Thermo-mechanical Analyses for Optimized Path Planning in Laser Aided Additive Manufacturing Processes. Mater. Des. 2019, 162, 80–93. DOI: https://doi.org/10.1016/j.matdes.2018.11.014.
- Paydas, H.; Mertens, A.; Carrus, R.; Lecomte-beckers, J.; Tchuindjang, J. T. Laser Cladding as Repair Technology for Ti–6Al–4V Alloy : Influence of Building Strategy on Microstructure and Hardness. Mater. Des. 2015, 85, 497–510. DOI: https://doi.org/10.1016/j.matdes.2015.07.03.
- Li, Y. X.; Ma, J. Study on Overlapping in the Laser Cladding Process. Surf. Coat. Technol. 1997, 90, 1–5. DOI: https://doi.org/10.1016/s0257-8972(96)03022-8.
- Calleja, A.; Tabernero, I.; Fernández, A.; Celaya, A.; Lamikiz, A.; López De Lacalle, L. N. Improvement of Strategies and Parameters for Multi-axis Laser Cladding Operations. Opt. Lasers Eng. 2014, 56, 113–120. DOI: https://doi.org/10.1016/j.optlaseng.2013.12.017.
- Yi, P.; Liu, Y.; Shi, Y.; Jang, H. Investigation on the Process of Laser Surface Melting Using Two Sequential Scans. Int. J. Adv. Manuf. Technol. 2011, 57, 225–233. DOI: https://doi.org/10.1007/s00170-011-3270-1.
- Petrat, T.; Winterkorn, R.; Graf, B.; Gumenyuk, A.; Rethmeier, M. Build-up Strategies for Temperature Control Using Laser Metal Deposition for Additive Manufacturing. Weld. World 2018, 62, 1073–1081. DOI: https://doi.org/10.1007/s40194-018-0604-8.
- Zhao, Y.; Yu, T.; Wang, Z.; Chen, H. Calculation and Verification of Start/Stop Optimum Overlapping Rate on Metal DLF Technology. Int. J. Adv. Manuf. Technol. 2018, 99, 437–452. DOI: https://doi.org/10.1007/s00170-018-2445-4.
- Zhao, Y.; Yu, T.; Guan, C.; Sun, J.; Tan, X. Microstructure and Friction Coefficient of Ceramic (Tic, TiN and B4C) Reinforced Ni-based Coating by Laser Cladding. Ceram. Int. 2019, 45, 20824–20836. DOI: https://doi.org/10.1016/j.ceramint.2019.07.070.
- Li, K.; Li, D.; Liu, D.; Pei, G.; Sun, L. Microstructure Evolution and Mechanical Properties of Multiple-layer Laser Cladding Coating of 308L Stainless Steel. Appl. Surf. Sci. 2015, 340, 143–150. DOI: https://doi.org/10.1016/j.apsusc.2015.02.171.
- Jang, J. Y.; Shim, H.; Lee, Y. J.; Lee, S. H.; Lee, J. G. Application of Negative Pressure Wound Therapy in Patients with Wound Dehiscence after Abdominal Open Surgery: A Single Center Experience. J. Korean Surg. Soc. 2013, 85, 180–184. DOI: https://doi.org/10.4174/jkss.2013.85.4.180.
- Liu, Y.; Xu, T. H.; Liu, Y.; Gao, Y. L.; Di, C. Wear and Heat Shock Resistance of Ni-WC Coating on Mould Copper Plate Fabricated by Laser. J. Mater. Res. Technol. 2020, 9, 8283–8288. DOI: https://doi.org/10.1016/j.jmrt.2020.05.083.
- Liu, J.; Tian, C. Influence of Second Phase on the Mechanism of Interaction between Fatigue and Creep for GH33A. Acta Aeronautica et Astronautica Sinica (China) 1989, 7, A404–A408.
- Fensin, S. J.; Jones, D. R.; Walker, E. K.; Farrow, A.; Imhoff, S. D.; Clarke, K.; Trujillo, C. P.; Martinez, D. T.; Gray, G. T.; Cerreta, E. K. The Effect of Distribution of Second Phase on Dynamic Damage. J. Appl. Phys. 2016, 120, 085901. DOI: https://doi.org/10.1063/1.4961041.
- Zhang, Z.; Kovacevic, R. A Thermo-mechanical Model for Simulating the Temperature and Stress Distribution during Laser Cladding Process. Int. J. Adv. Manuf. Technol. 2019, 102, 457–472. DOI: https://doi.org/10.1007/s00170-018-3127-y.
- Joseph, J.; Stanford, N.; Hodgson, P.; Fabijanic, D. M. Tension/compression Asymmetry in Additive Manufactured Face Centered Cubic High Entropy Alloy. Scr. Mater. 2017, 129, 30–34. DOI: https://doi.org/10.1016/j.scriptamat.2016.10.023.