References
- Das, T. K.; Ghosh, P.; Das, N. C. Preparation, Development, Outcomes, and Application Versatility of Carbon Fiber-Based Polymer Composites: A Review. Adv. Compos. Hybrid Mater. 2019, 2(2), 214–233. DOI: https://doi.org/10.1007/s42114-018-0072-z.
- Rajak, D. K.; Pagar, D. D.; Menezes, P. L.; Linul, E. Fiber-Reinforced Polymer Composites: Manufacturing, Properties, and Applications. Polymers (Basel). 2019, 11(10), 1–37. DOI: https://doi.org/10.3390/polym11101667.
- Wu, Y.; Xia, C.; Cai, L.; Garcia, A. C.; Shi, S. Q. Development of Natural Fiber-Reinforced Composite with Comparable Mechanical Properties and Reduced Energy Consumption and Environmental Impacts for Replacing Automotive Glass-Fiber Sheet Molding Compound. J. Clean. Prod. 2018, 184, 92–100. DOI: https://doi.org/10.1016/j.jclepro.2018.02.257.
- Sanjay, M. R.; Madhu, P.; Jawaid, M.; Senthamaraikannan, P.; Senthil, S.; Pradeep, S. Characterization and Properties of Natural Fiber Polymer Composites: A Comprehensive Review. J. Clean. Prod. 2018, 172, 566–581. DOI: https://doi.org/10.1016/j.jclepro.2017.10.101.
- Petinakis, E.; Yu, L.; Simon, G.; De, K. 2013. Natural Fibre Bio-Composites Incorporating Poly(Lactic Acid). In Fiber Reinforced Polymers - the Technology Applied for Concrete Repair, Masuelli, M., Ed., 41–59. InTech: Rijeka, Croatia. doi:https://doi.org/10.5772/52253.
- Miller, S. A.;. Natural Fiber Textile Reinforced Bio-Based Composites: Mechanical Properties, Creep, and Environmental Impacts. J. Clean. Prod. 2018, 198, 612–623. DOI: https://doi.org/10.1016/j.jclepro.2018.07.038.
- United Nations EnvironmentProgramme. Single-Use Plastics: A Roadmap for Sustainability. 2018 (Rev. ed., pp. vi; 6), Nairobi, Kenya.
- Lila, M. K.; Komal, U. K.; Singh, Y.; Singh, I. Extraction and Characterization of Munja Fibers and Its Potential in the Biocomposites. J. Nat. Fibers. 2020, 1–19, In Press. DOI: https://doi.org/10.1080/15440478.2020.1821287.
- Chaitanya, S.; Singh, I. Novel Aloe Vera Fiber Reinforced Biodegradable Composites - Development and Characterization. J. Reinf. Plast. Compos. 2016, 35(19), 1411–1423. DOI: https://doi.org/10.1177/0731684416652739.
- Sangregorio, A.; Guigo, N.; van der Waal, J. C.; Sbirrazzuoli, N. All ‘Green’ Composites Comprising Flax Fibres and Humins’ Resins. Compos. Sci. Technol. 2019, 171(November 2018), 70–77. DOI: https://doi.org/10.1016/j.compscitech.2018.12.008.
- Bajpai, P. K.; Singh, I.; Madaan, J. Development and Characterization of PLA-Based Green Composites. J. Thermoplast. Compos. Mater. 2014, 27(1), 52–81. DOI: https://doi.org/10.1177/0892705712439571.
- Komal, U. K.; Sharma, H.; Singh, I. 2019. Lignocellulosic Polymer Composites: Processing, Challenges, and Opportunities. In Processing of Green Composites, Rakesh Pawan, K., Singh, I., Eds., 15–30. Singapore: Springer: doi:https://doi.org/10.1007/978-981-13-6019-0_2.
- Dungani, R.; Karina, M.; Sbyakto,; Sulaeman, A.; Hermawan, D.; Hadiyane, A. Agricultural Waste Fibers Towards Sustainability and Advanced Utilization: A Review. Asian J. Plant Sci. 2016, 15(1), 42–55. DOI: https://doi.org/10.3923/ajps.2016.42.55.
- Asim, M.; Abdan, K.; Jawaid, M.; Nasir, M.; Dashtizadeh, Z.; Ishak, M. R.; Hoque, M. E. A. Review on Pineapple Leaves Fibre and Its Composites. Int. J. Polym. Sci. 2015, 950567, 1–16. DOI: https://doi.org/10.1155/2015/950567.
- Satyanarayana, K. G.; Pillai, C. K. S.; Sukumaran, K.; Pillai, S. G. K.; Rohatgi, P. K.; Vijayan, K. Structure Property Studies of Fibres from Various Parts of the Coconut Tree. J. Mater. Sci. 1982, 17, 2453–2462. DOI: https://doi.org/10.1007/BF00543759.
- Natural Fibers, Biopolymers, and Biocomposites. Amar K. Mohanty, Misra, M., Drzal, L. T., Eds.; Taylor & Francis, CRC Press: Boca Raton, Florida, USA, 2005.
- Kabir, M. M.; Wang, H.; Lau, K. T.; Cardona, F. Chemical Treatments on Plant-Based Natural Fibre Reinforced Polymer Composites: An Overview. Compos. Part B Eng. 2012, 43(7), 2883–2892. DOI: https://doi.org/10.1016/j.compositesb.2012.04.053.
- Nopparut, A.; Amornsakchai, T. Influence of Pineapple Leaf Fiber and It’s Surface Treatment on Molecular Orientation In, and Mechanical Properties Of, Injection Molded Nylon Composites. Polym. Test. 2016, 52, 141–149. DOI: https://doi.org/10.1016/j.polymertesting.2016.04.012.
- Anuar, H.; Zuraida, A.; Kovacs, J. G.; Tabi, T. Improvement of Mechanical Properties of Injection-Molded Polylactic Acid-Kenaf Fiber Biocomposite. J. Thermoplast. Compos. Mater. 2012, 25(2), 153–164. DOI: https://doi.org/10.1177/0892705711408984.
- Graupner, N.; Herrmann, A. S.; Müssig, J. Natural and Man-Made Cellulose Fibre-Reinforced Poly(Lactic Acid) (PLA) Composites: An Overview about Mechanical Characteristics and Application Areas. Compos. Part A Appl. Sci. Manuf. 2009, 40(6–7), 810–821. DOI: https://doi.org/10.1016/j.compositesa.2009.04.003.
- Pan, P.; Zhu, B.; Kai, W.; Serizawa, S.; Iji, M.; Inoue, Y. Crystallization Behavior and Mechanical Properties of Bio-Based Green Composites Based on Poly(L-Lactide) and Kenaf Fiber. J. Appl. Polym. Sci. 2007, 105, 1511–1520. DOI: https://doi.org/10.1002/app.
- Chaitanya, S.; Singh, I. Sisal Fiber-Reinforced Green Composites: Effect of Ecofriendly Fiber Treatment. Polym. Compos. 2017, 16(2), 101–113. DOI: https://doi.org/10.1002/pc.
- Chaitanya, S.; Singh, I. Ecofriendly Treatment of Aloe Vera Fibers for PLA Based Green Composites. Int. J. Precis. Eng. Manuf. - Green Technol. 2018, 5(1), 143–150. DOI: https://doi.org/10.1007/s40684-018-0015-8.
- Bodros, E.; Pillin, I.; Montrelay, N.; Baley, C. Could Biopolymers Reinforced by Randomly Scattered Flax Fibre Be Used in Structural Applications? Compos. Sci. Technol. 2007, 67(3–4), 462–470. DOI: https://doi.org/10.1016/j.compscitech.2006.08.024.
- Serizawa, S.; Inoue, K.; Iji, M. Kenaf-Fiber-Reinforced Poly(Lactic Acid) Used for Electronic Products. J. Appl. Polym. Sci. 2006, 100(1), 618–624. DOI: https://doi.org/10.1002/app.23377.
- Chaitanya, S.; Singh, I. Processing of PLA/Sisal Fiber Biocomposites Using Direct and Extrusion-Injection Molding. Mater. Manuf. Process. 2016, 32(5), 468–474. DOI: https://doi.org/10.1080/10426914.2016.1198034.
- Komal, U. K.; Lila, M. K.; Chaitanya, S.; Singh, I. Fabrication of Short Fiber Reinforced Polymer Composites. In Reinforced Polymer Composites: Processing, Characterization and Post Life Cycle Assessment; Bajpai, P. K., Singh, I., Eds.; Wiley-VCH Verlag GmbH Co. KGaA; Weinheim, Germany, 2019; pp 21–38. DOI: https://doi.org/10.1002/9783527820979.ch2
- Fairuz, A. M.; Sapuan, S. M.; Zainudin, E. S.; Jaafar, C. N. Pultrusion Process of Natural Fibre- Reinforced Polymer Composites. In Manufacturing of Natural Fibre Reinforced Polymer Composites; Salit, M. S., Jawaid, M., Yusoff, N. B., Hoque, M. E., Eds.; Springer International Publishing: Cham, 2015; pp 217–231. DOI: https://doi.org/10.1007/978-3-319-07944-8.
- Wang, L.; Tong, Z.; Ingram, L. O.; Cheng, Q.; Matthews, S. Green Composites of Poly (Lactic Acid) and Sugarcane Bagasse Residues from Bio-Refinery Processes. J. Polym. Environ. 2013, 21(3), 780–788. DOI: https://doi.org/10.1007/s10924-013-0601-3.
- Annicchiarico, D.; Alcock, J. R. Review of Factors that Affect Shrinkage of Molded Part in Injection Molding. Mater. Manuf. Process. 2014, 29(6), 662–682. DOI: https://doi.org/10.1080/10426914.2014.880467.
- Lila, M. K.; Shukla, K.; Komal, U. K.; Singh, I. Accelerated Thermal Ageing Behaviour of Bagasse Fibers Reinforced Poly (Lactic Acid) Based Biocomposites. Compos. Part B Eng. 2019, 156(January 2019), 121–127. DOI: https://doi.org/10.1016/j.compositesb.2018.08.068.
- Du, Y.; Wu, T.; Yan, N.; Kortschot, M. T.; Farnood, R. Fabrication and Characterization of Fully Biodegradable Natural Fiber-Reinforced Poly(Lactic Acid) Composites. Compos. Part B Eng. 2014, 56, 717–723. DOI: https://doi.org/10.1016/j.compositesb.2013.09.012.
- Azwa, Z. N.; Yousif, B. F.; Manalo, A. C.; Karunasena, W. A Review on the Degradability of Polymeric Composites Based on Natural Fibres. Mater. Des. 2013, 47, 424–442. DOI: https://doi.org/10.1016/j.matdes.2012.11.025.
- Suwan, T.; Fan, M. Effect of Manufacturing Process on the Mechanisms and Mechanical Properties of Fly Ash-Based Geopolymer in Ambient Curing Temperature. Mater. Manuf. Process. 2017, 32(5), 461–467. DOI: https://doi.org/10.1080/10426914.2016.1198013.
- Palanisamy, D.; Venkateshwarapuram Rengaswami, G. D. Novel Manufacturing Process for Improving Mechanical Properties of Flax/PP Composites. Mater. Manuf. Process. 2018, 33(5), 580–586. DOI: https://doi.org/10.1080/10426914.2017.1388525.
- Komal, U. K.; Lila, M. K.; Singh, I. PLA/Banana Fiber Based Sustainable Biocomposites: A Manufacturing Perspective. Compos. Part B Eng. 2020, 180(October 2019), 107535. DOI: https://doi.org/10.1016/j.compositesb.2019.107535.
- Azad, R.; Shahrajabian, H. Experimental Study of Warpage and Shrinkage in Injection Molding of HDPE/RPET/Wood Composites with Multiobjective Optimization. Mater. Manuf. Process. 2019, 34(3), 274–282. DOI: https://doi.org/10.1080/10426914.2018.1512123.
- Vonk, C. G.;. Computerization of Ruland’s X-Ray Method for Determination of the Crystallinity in Polymers. J. Appl. Crystallogr. 1973, 6(2), 148–152. DOI: https://doi.org/10.1107/S0021889873008332.
- Brezinová, J.; Guzanová, A. Friction Conditions during the Wear of Injection Mold Functional Parts in Contact with Polymer Composites. J. Reinf. Plast. Compos. 2010, 29(11), 1712–1726. DOI: https://doi.org/10.1177/0731684409341675.
- Lila, M. K.; Singhal, A.; Banwait, S. S.; Singh, I.; Recyclability, A. Study of Bagasse Fiber Reinforced Polypropylene Composites. Polym. Degrad. Stab. 2018, 152, 272–279. DOI: https://doi.org/10.1016/j.polymdegradstab.2018.05.001.
- Zhang, Y.; Wu, J.; Wang, B.; Sui, X.; Zhong, Y.; Zhang, L.; Mao, Z.; Xu, H. Cellulose Nanofibril-Reinforced Biodegradable Polymer Composites Obtained via a Pickering Emulsion Approach. Cellulose. 2017, 24(8), 3313–3322. DOI: https://doi.org/10.1007/s10570-017-1324-8.
- Shibata, S.; Bozlur, R. M.; Fukumoto, I.; Kanda, Y. Effects of Injection Temperature on Mechanical Properties of Bagasse/Polypropylene Injection Molding Composites. BioResources. 2010, 5(4), 2097–2111. DOI: https://doi.org/10.15376/biores.5.4.2097-2111.
- Lila, M. K.; Komal, U. K.; Singh, I. Thermal Post-Processing of Bagasse Fiber Reinforced Polypropylene Composites. Compos. Commun. 2020, 23(April 2020), 100546. DOI: https://doi.org/10.1016/j.coco.2020.100546.
- Silverajah, V. S. G.; Ibrahim, N. A.; Yunus, W. M. Z. W.; Hassan, H. A.; Woei, C. B.; Comparative, A. Study on the Mechanical, Thermal and Morphological Characterization of Poly (Lactic Acid)/ Epoxidized Palm Oil Blend. Int. J. Mol. Sci. 2012, 13, 5878–5898. DOI: https://doi.org/10.3390/ijms13055878.
- Borchani, K. E.; Carrot, C.; Jaziri, M. Rheological Behavior of Short Alfa Fibers Reinforced Mater-Bi® Biocomposites. Polym. Test. 2019, 77(December 2018), 105895. DOI: https://doi.org/10.1016/j.polymertesting.2019.05.011.
- Raghu, N.; Kale, A.; Raj, A.; Aggarwal, P.; Chauhan, S. Mechanical and Thermal Properties of Wood Fibers Reinforced Poly(Lactic Acid)/Thermoplasticized Starch Composites. J. Appl. Polym. Sci. 2018, 135(15), 1–10. DOI: https://doi.org/10.1002/app.46118.
- Saba, N.; Jawaid, M.; Alothman, O. Y.; Paridah, M. T. A. Review on Dynamic Mechanical Properties of Natural Fibre Reinforced Polymer Composites. Constr. Build. Mater. 2016, 106, 149–159. DOI: https://doi.org/10.1016/j.conbuildmat.2015.12.075.
- Cheung, H. Y.; Lau, K. T.; Tao, X. M.; Hui, D.; Potential, A. Material for Tissue Engineering: Silkworm Silk/PLA Biocomposite. Compos. Part B Eng. 2008, 39(6), 1026–1033. DOI: https://doi.org/10.1016/j.compositesb.2007.11.009.
- Huda, M. S.; Drzal, L. T.; Mohanty, A. K.; Misra, M. Effect of Fiber Surface-Treatments on the Properties of Laminated Biocomposites from Poly(Lactic Acid) (PLA) and Kenaf Fibers. Compos. Sci. Technol. 2008, 68(2), 424–432. DOI: https://doi.org/10.1016/j.compscitech.2007.06.022.
- Komal, U. K.; Verma, V.; Ashwani, T.; Verma, N.; Singh, I. Effect of Chemical Treatment on Thermal, Mechanical and Degradation Behavior of Banana Fiber Reinforced Polymer Composites. J. Nat. Fibers. 2018, 17(7), 1026–1038. DOI: https://doi.org/10.1080/15440478.2018.1550461.
- Espert, A.; Vilaplana, F.; Karlsson, S. Comparison of Water Absorption in Natural Cellulosic Fibres from Wood and One-Year Crops in Polypropylene Composites and Its Influence on Their Mechanical Properties. Compos. Part A Appl. Sci. Manuf. 2004, 35(11), 1267–1276. DOI: https://doi.org/10.1016/j.compositesa.2004.04.004.
- Lin, J.; Yang, Z.; Hu, X.; Hong, G.; Zhang, S.; Song, W. The Effect of Alkali Treatment on Properties of Dopamine Modification of Bamboo Fiber/Polylactic Acid Composites. Polymers (Basel). 2018, 10(4), 403. DOI: https://doi.org/10.3390/polym10040403.
- Chaitanya, S.; Singh, I.; Song, J. I. Recyclability Analysis of PLA/Sisal Fiber Biocomposites. Compos. Part B Eng. 2019, 173(May), 106895. DOI: https://doi.org/10.1016/j.compositesb.2019.05.106.
- Kamarudin, S. H.; Abdullah, L. C.; Aung, M. M.; Ratnam, C. T. A. Study of Mechanical and Morphological Properties of PLA Based Biocomposites Prepared with EJO Vegetable Oil Based Plasticiser and Kenaf Fibres. IOP Conf. Ser. Mater. Sci. Eng. 2018, 368(1), 012011. DOI: https://doi.org/10.1088/1757-899X/368/1/012011.