References
- Ghalehbandi, S.M.; Malaki,M.; Gupta,M. Accumulative Roll Bonding—A Review. Applied Sciences. 2019, 9(17), 3627. DOI: https://doi.org/10.3390/app9173627.
- Xu, X.J.; Li,C.; Wang, S.F.; Tabie, V.M.; Liu, Z.G.; Zhang,T. Microstructural Evolution and Mechanical Properties of Al-Zn-Mg-Cu Alloy Processed by Integrated Extrusion and Equal Channel Angular Pressing and Heat Treatment. Mater. Resea. Expre. 2019, 6, 8. DOI: https://doi.org/10.1088/2053-1591/ab23a0.
- Silva, N.A.N.; Pereira, P.H.R.; Corrêa, ,. E.C.; Paulino Aguilar, C.S.M.T.P.; Cetlin, P.R. Microstructural Evolution and Mechanical Properties in aZn–Al–Cu–Mg Hypoeutectic Alloy Processed by Multi-directional Forging at Room Temperature. Materials Science and Engineering: A. 2021, 801, 140420. DOI: https://doi.org/10.1016/j.msea.2020.140420.
- Li,P.; Wu, G.S.; Yan, S.L.; Zhou, J.L.; Xue, K.M.; Shi, W.C.; Improve Stress Corrosion Cracking Resistance and Mechanical Properties of Al-Zn-Mg-Cu-Zr Alloy with Heterogeneous Lamellae Structure Produced by High Pressure Torsion. Mater. wiss. Werks. 2019, 51, 1273. DOI:https://doi.org/10.1002/mawe.201800115.
- Patel, V.V.; Badheka,V.; Kumar,A. Influence of Friction Stir Processed Parameters on Superplasticity of Al-Zn-Mg-Cu Alloy. Materials and Manufacturing Processes. 2016, 31(12), 1573–1582. DOI: https://doi.org/10.1080/10426914.2015.1103868.
- Mishra, R.S.; Mahoney, M.W.; McFaden, S.X.; Mara, N.A.; Mukherjee, A.K. High Strain Rate Superplasticity in aFriction Stir Processed 7075 Al Alloy. Scr. Mater. 1999, 42(2), 163–168. DOI: https://doi.org/10.1016/S1359-6462(99)00329-2.
- Ghavimi, A.H.; Aboutalebi, M.R.; Seyedein, S.H. Exit-hole Repairing in Friction Stir Welding of AA5456 Pipe Using Consumable Pin. Materials and Manufacturing Processes. 2020, 35(11), 1240–1250. DOI: https://doi.org/10.1080/10426914.2020.1772491.
- Orozco-Caballero,A.; Álvarez-Leal,M.; Verdera,D.; Rey,P.; Ruano, O.A.; Carreño,F. Evaluation of the Mechanical Anisotropy and the Deformation Mechanism in a Multi-pass Friction Stir Processed Al-Zn-Mg-Cu Alloy. . Materials & Design. 2017, 125, 116–125. DOI: https://doi.org/10.1016/j.matdes.2017.03.081.
- Carvalho, G.H.S.F.L.; Galvão,I.; Mendes,R.; Leal, R.M.; Loureiro,A. Friction Stir Welding and Explosive Welding of Aluminum/copper: Process Analysis. Materials and Manufacturing Processes. 2019, 34(11), 1243–1250. DOI: https://doi.org/10.1080/10426914.2019.1644452.
- Gangil,N.; Maheshwari,S.; Siddiquee, A.N. Multipass FSP on AA6063-T6 Al: Strategy to Fabricate Surface Composites. Materials and Manufacturing Processes. 2018, 33(7), 805–811. DOI: https://doi.org/10.1080/10426914.2017.1415448.
- Sharma, A.V.; Sharma, V.M.; Mewar,S.; Pal, S.K.; Paul, J. Friction Stir Processing of Al6061- SiC -graphite Hybrid Surface Composites. Materials and Manufacturing Processes.2018, 33(7), 795–804. DOI: https://doi.org/10.1080/10426914.2017.1401726.
- Godasu, A.K.; Kumar,A.; Mula,S. Influence of Cryocooling on Friction Stir Processing of Al-5083 Alloy. Materials and Manufacturing Processes. 2020, 35(2), 202–213. DOI: https://doi.org/10.1080/10426914.2019.1697442.
- Li,K.; Liu,X.; Zhao,Y. Research Status and Prospect of Friction Stir Processing Technology. Coatings. 2019, 9(2), 129. DOI: https://doi.org/10.3390/coatings9020129.
- Singh,T.; Tiwari, S.K.; Shukla, D.K.; Effect of Nano-sized Particles on Grain Structure and Mechanical Behavior of Friction Stir Welded Al-nanocomposites. Proceed. Instit. Mechani. Eng. Part L: J.Mater. 2019, 2342, 51–56. DOI:https://doi.org/10.1177/1464420719885156.
- Liu, W.Y.; Wu, D.T.; Duan, S.W.; Wang,T.; Zou,Y. A Study on Fatigue Crack Propagation for Friction Stir Welded Plate of 7N01 Al-Zn-Mg Alloy by EBSD. Materials.2020, 13(2), 330–341. DOI: https://doi.org/10.3390/ma13020330.
- Chen,Y.; Ding,H.; Li,J.-Z.; Zhao,J.-W.; Fu,M.-J.; Li,X.-H. Effect of Welding Heat Input and Post-welded Heat Treatment on Hardness of Stir Zone for Friction Stir-welded 2024-T3 Aluminum Alloy. . Transactions of Nonferrous Metals Society of China. 2015, 25(8), 2524–2532. DOI: https://doi.org/10.1016/S1003-6326(15)63871-7.
- El-Rayes, M.M.; El-Danaf, E.A. The Influence of Multi-pass Friction Stir Processing on the Microstructural and Mechanical Properties of Aluminum Alloy 6082. Journal of Materials Processing Technology. 2012, 212(5), 1157–1168. DOI: https://doi.org/10.1016/j.jmatprotec.2011.12.017.
- Jata, K.V.; Sankaran, K.K.; Ruschau, J.J. Friction-stir Welding Effects on Microstructure and Fatigue of Aluminum Alloy 7050-T7451. . Metallurgical and Materials Transactions A. 2000, 31(9), 2181–2192. DOI: https://doi.org/10.1007/s11661-000-0136-9.
- John,R.;. Residual Stress Effects on Near-threshold Fatigue Crack Growth in Friction Stir Welds in Aerospace Alloys. International Journal of Fatigue. 2003, 25(9–11), 939–948. DOI: https://doi.org/10.1016/j.ijfatigue.2003.08.002.
- Rao, T.S.; Reddy, G.M.; RAO, S.R.K.O.T.E.S.W.A.R.A. Microstructure and Mechanical Properties of Friction Stir Welded AA7075–T651 Aluminum Alloy Thick Plates. . Transactions of Nonferrous Metals Society of China. 2015, 25(6), 1770–1778. DOI: https://doi.org/10.1016/S1003-6326(15)63782-7.
- Yang, W.J.; Ding,H.; Mu, Y.L.; Li, J.Z.; Zhang, W.J. Achieving High Strength and Ductility in Double-Sided Friction Stir Processing 7050-T7451 Aluminum Alloy. Materials Science and Engineering: A. 2017, 707, 193–198. DOI: https://doi.org/10.1016/j.msea.2017.09.028.
- Zolghadr,P.; Akbari,M.; Asadi,P. Formation of Thermo-mechanically Affected Zone in Friction Stir Welding. Mater. Resea. Expre. 2019, 6, 8. https://doi.org/10.1088/2053-1591/ab1d25
- Tayon, W.A.; Domack, M.S.; Hoffman, E.K.; Hales, S.J. Texture Evolution within the Thermomechanically Affected Zone of an Al-Li Alloy 2195 Friction Stir Weld. . Metallurgical and Materials Transactions A. 2013, 44(11), 4906–4913. DOI: https://doi.org/10.1007/s11661-013-1802-z.
- Mahoney, M.W.; Rhodes, C.G.; Flintoff, J.G.; Bingel, W.H.; Spurling, R.A. Properties of Friction-stir-welded 7075 T651 Aluminum. . Metallurgical and Materials Transactions A. 1998, 29(7), 1955–1964. DOI: https://doi.org/10.1007/s11661-998-0021-5.
- Zhang,Z.; Xiao, B.L.; Ma, Z.Y. Hardness Recovery Mechanism in the Heat-affected Zone during Long-term Natural Aging and Its Influence on the Mechanical Properties and Fracture Behavior of Friction Stir Welded 2024Al–T351 Joints. Acta Materialia. 2014, 73, 227–239. DOI: https://doi.org/10.1016/j.actamat.2014.04.021.
- Li,N.; Li, W.Y.; Yang, X.W.; Alexopoulos, N.D. Corrosion Performance and Mechanical Properties of Friction Stir Welded AA2024‐T3 Joints under Different Corrosion Solution Exposure. Mater. Corrosion. 2017, 30, 97–105. DOI: https://doi.org/10.1002/maco.201609346.
- Liu, X.Q.; Liu, H.J.; Wang, T.H.; Wang, X.G.; Yang,S. Correlation between Microstructures and Mechanical Properties of High-speed Friction Stir Welded Aluminum Hollow Extrusions Subjected to Axial Forces. Journal of Materials Science & Technology. 2018, 34(1), 102–111. DOI: https://doi.org/10.1016/j.jmst.2017.11.015.
- Kwon, Y.J.;. Mechanical Properties of Fine-grained Aluminum Alloy Produced by Friction Stir Process. . Scripta Materialia. 2003, 49(8), 785–789. DOI: https://doi.org/10.1016/S1359-6462(03)00407-X.
- Oyarzábal,M.; Martínez-de-Guerenu,A.; Gutiérrez,I. Microstructural Evolution and mechanical Properties in a . Zn–Al–Cu–Mg Hypoeutectic Alloy Processed by Multi-directional Forging at Room Temperature. Materials Science and Engineering: A. 2021, 801(1), 200–209. DOI: https://doi.org/10.1016/j.msea.2020.140420.
- Shimizu,I.; Ueda,T.; Grain Size Evolution in Dynamic Recrystallization of Quartz: Influence of Grain Boundary Energy. Geotectonic Res. 2015, 971, 160. DOI:https://doi.org/10.1127/1864-5658/2015-80.
- Golafshani, K.B.; Nourouzi,S.; Aval, H.J. Evaluating the Microstructure and Mechanical Properties of Friction Stir Processed Al–Si Alloy. . Materials Science and Technology. 2019, 35(9), 1–10. DOI: https://doi.org/10.1080/02670836.2019.1612577.
- Wang,J.; Lu, Y.L.; Zhou, D.S.; Zhang,Y.; Bai, Z.H.; Li,X.; Effects of Cooling Condition on Microstructural Evolution and Mechanical Properties of Friction Stir Processed 2A14 Aluminum Alloy. Mater. Resea. Expre. 2019, 612, 12. DOI:https://doi.org/10.1088/2053-1591/ab429d.
- Patel, S.K.; Singh, V.P.; Kuriachen,B. Friction Stir Processing of Alloys with Secondary Phase Particles: An Overview. Materials and Manufacturing Processes. 2019, 34(13), 1429–1457. DOI: https://doi.org/10.1080/10426914.2019.1662037.
- Conserva,M.; Buratti,M.; Russo, E.D.; Gatto,F. Age Hardening Behavior of TMT Processed Al-Zn-Mg-Cu Alloy. Mater. Sci. Eng. A. 1973, 11, 87–119. DOI: https://doi.org/10.1016/0025-5416(73)90050-5.
- Charai,A.; Walther,T. Coexistence of Clusters, GPB Zones, S″-, S′- and S-phases in an Al-0.9% Cu-1.4% Mg Alloy. Acta Mater. 2000, 48, 2751–2764. DOI: https://doi.org/10.1016/S1359-6454(99)00422-X.
- Lotfi, A.H.; Nourouzi,S. Effect of Welding Parameters on Microstructure, Thermal, and Mechanical Properties of Friction-Stir Welded Joints of AA7075-T6 Aluminum Alloy. Metallurgical and Materials Transactions A. 2014, 45(6), 2792–2807. DOI: https://doi.org/10.1007/s11661-014-2235-z.
- Fadaeifard,F.; Pakmanesh, M.R.; Esfahani, M.S.; Matori, K.A.; Chicot,D. Nanoindentation Analysis of Friction Stir Welded 6061-T6 Al Alloy in As-Weld and Post Weld Heat Treatment. Physics of Metals and Metallography. 2019, 120(5), 483–491. DOI: https://doi.org/10.1134/S0031918X1905003X.
- Hirota,N.; Yin,F.; Azuma,T.; Inoue,T. Yield Stress of Duplex Stainless Steel Specimens Estimated Using aCompound Hall–Petch Equation. Science and Technology of Advanced Materials. 2010, 11(2), 025004. DOI: https://doi.org/10.1088/1468-6996/11/2/025004.
- Mondal,C.; Mukhopadhyay, A.K. On the Nature of T (Al2mg3zn3) and S (Al2cumg) Phases Present in As-cast and Annealed 7055 Aluminum Alloy. Mater. Sci. Eng. A. 2005, 391, 367–376. DOI: https://doi.org/10.1016/j.msea.2004.09.013.
- Garcia-Garcia, A.L.; Dominguez-Lopez,I.; Lopez-Jimenez,L.; Barceinas-Sanchez, J.D.O. Comparative Quantification and Statistical Analysis of η′ and η Precipitates in Aluminum Alloy AA7075-T651 by TEM and AFM. Mater. Charac. 2014, 87, 116–124. DOI: https://doi.org/10.1016/j.matchar.2013.11.007.
- Yang, X.B.; Liu, J.Z.; Chen, J.H.; Wan, C.Y.; Fang,L.; Liu,P.; Wu, C.L.; Relationship between the Strengthening Effect and the Morphology of Precipitates in Al-7.4Zn-1.7Mg-2.0Cu Alloy. Acta Metallurgica Sinica (English Letters). 2014, 276, 1070–1077. DOI:https://doi.org/10.1007/s40195-014-0122-7.
- Reynolds, A.P.; Tang,W.; Khandkar,Z.; Khan, J.A.; Lindner,K.; Relationships between Weld Parameters, Hardness Distribution and Temperature History in Alloy 7050 Friction Stir Welds. Sci. Techn. Weldi. Joini. 2005, 12, 190–199. DOI:https://doi.org/10.1179/174329305X37024.
- Hwang, R.Y.; Chou, C.P. The Study on Microstructural and Mechanical Properties of Weld Heat Affected Zone of 7075-T651 Aluminum Alloy. Scri. Mater. 1997, 38(2), 215–221.
- Yang, W.J.; Li, J.Z.; Wen,X.; Ding,H. Improvement of Microstructure and Mechanical Properties of 7050-T7451 Aluminum by aNovel Double-Sided Friction Stir Processing. Mater. Sci. Forum. 2016, 838–839, 385–391. doi: https://doi.org/10.4028/scientific.net/MSF.838-839.385.
- Zhao,S.; Bi, Q.Z.; Wang, Y.H.; Shi,J. Empirical Modeling for the Effects of Welding Factors on Tensile Properties of Bobbin Tool Friction Stir-welded 2219-T87 Aluminum Alloy. International J.Adva. Manuf. Techn. 2016, 90, 1105–1118. DOI: https://doi.org/10.1007/s00170-016-9450-2.
- Bussu,G.; Irving, P.E. The Role of Residual Stress and Heat Affected Zone Properties on Fatigue Crack Propagation in Friction Stir Welded 2024-T351 Aluminium Joints. Inter. J.Fatig. 2003, 25, 77–88. DOI: https://doi.org/10.1016/S0142-1123(02)00038-5.
- Fuller, C.B.; Mahoney, M.W. Evolution of Microstructure and Mechanical Properties in Naturally Aged 7050 and 7075 Al Friction Stir Welds. Mater. Sci. Eng. A. 2010, 527, 2233–2240. DOI: https://doi.org/10.1016/j.msea.2009.11.057.
- Li, X.H.; He, J.C.; Ji, Y.J.; Zhang, T.C.; Zhang, Y.H. Study of the Microstructure and Fracture Toughness of TC17 Titanium Alloy Linear Friction Welding Joint. Metals. 2019, 9, 430. DOI: https://doi.org/10.3390/met9040430.
- Liu, H.J.; Fujii,H.; Maeda,M.; Nogi,K.; Tensile Properties and Fracture Locations of Friction-stir-welded Joints of 2017-T351 Aluminum Alloy. J.Mater. Proce. Techn. 2003, 1423, 692–696. DOI:https://doi.org/10.1016/s0924-0136(03)00806-9.