References
- Smokovych, I.; Scheffler, M.; Li, S.; Yao, B. New-type Oxidation Barrier Coatings for Titanium Alloys. Adv. Eng. Mater. 2020, 22, 1–10. DOI: https://doi.org/10.1002/adem.201901224.
- Hu, K.; Lo, S.; Wu, H.; To, S. Study on Influence of Ultrasonic Vibration on the Ultra-precision Turning of Ti6Al4V Alloy Based on Simulation and Experiment. IEEE Access. 2019, 7, 33640–33651. DOI: https://doi.org/10.1109/ACCESS.2019.2896731.
- Shao, L.; Wu, S.; Peng, W.; Datye, A.; Liu, J.; Lefoul, M.; Ju, H.; Liu, Y. Microstructure and Mechanical Behavior of an Annealed Automatic Gas Tungsten Arc Weld Joint of TA16 and TC4 Titanium Alloys. Mater. Res. Express. 2019, 6, 1–10. DOI: https://doi.org/10.1088/2053-1591/ab0160.
- Taheri-Behrooz, F.; Aliha, M. R.; Maroofi, M.; Hadizadeh, V. Residual Stresses Measurement in the Butt Joint Welded Metals Using FSW and TIG Methods. Steel Compos. Struct. 2018, 28, 759–766. DOI: https://doi.org/10.12989/scs.2018.28.6.759.
- Junaid, M.; Rahman, K.; Khan, F.; Bakhsh, N.; Baig, M. Comparison of Microstructure, Mechanical Properties, and Residual Stresses in Tungsten Inert Gas, Laser, and Electron Beam Welding of Ti-5Al-2.5 Sn Titanium Alloy. Proc. Inst. Mech. Eng. Pt. L-J. Mater.-Design Appl. 2019, 233, 1336–1351. DOI: https://doi.org/10.1177/1464420717748345.
- Burek, R.; Wydrzyński, D.; Kubit, A.; Łogin, W. The Influence of the Shoulder Depth on the Properties of the Thin Sheet Joint Made by FSW Technology. Aircr. Eng. 2020, 93, 120–126. DOI: https://doi.org/10.1108/AEAT-04-2019-0067.
- Patel, V.; Li, W.; Wang, G.; Wang, F.; Vairis, A.; Niu, P. Friction Stir Welding of Dissimilar Aluminum Alloy Combinations: State-of-the-art. Metals. 2019, 9, 1–19. DOI: https://doi.org/10.3390/met9030270.
- Nie, L.; Wu, Y.; Gong, H. Prediction of Temperature and Residual Stress Distributions in Friction Stir Welding of Aluminum Alloy. Int. J. Adv. Manuf. Technol. 2020, 106, 3301–3310. DOI: https://doi.org/10.1007/s00170-019-04826-4.
- Mohamed, N.; Alias, J. The Influence of Friction Stir Welding of Dissimilar AZ31 and AZ91 Magnesium Alloys on the Microstructure and Tensile Properties. Int. J. Automot. Mech. Eng. 2019, 16, 6675–6683. DOI: https://doi.org/10.15282/ijame.16.2.2019.15.0502.
- Liu, D.; Tang, Y.; Shen, M.; Hu, Y.; Zhao, L. Analysis of Weak Zones in Friction Stir Welded Magnesium Alloys from the Viewpoint of Local Texture: A Short Review. Metals. 2018, 8, 1–16. DOI: https://doi.org/10.3390/met8110970.
- Amirov, A.; Chumaevskii, A.; Vorontsov, A. Formation of (α+ β) Titanium Welds by Friction Stir Welding Using Heat-resistant Alloy Tool. AIP Conf. Proc. 2020, 2310, 1–17. DOI: https://doi.org/10.1063/5.0034654.
- Liu, Z.; Wang, Y.; Ji, S.; Yan, D. Fatigue Properties of Ti-6Al-4V Titanium Alloy Friction Stir Welding Joint. J. Mater. Eng. Perform. 2018, 27, 4308–4316. DOI: https://doi.org/10.1007/s11665-018-3490-8.
- Karna, S.; Cheepu, M.; Venkateswarulu, D.; Srikanth, V. Recent Developments and Research Progress on Friction Stir Welding of Titanium Alloys: An Overview. IOP Conf. Ser. Mater. Sci. Eng. 2018, 330, 1–16. DOI: https://doi.org/10.1088/1757-899X/330/1/012068.
- Ji, S.; Li, Z.; Wang, Y.; Ma, L. Joint Formation and Mechanical Properties of Back Heating Assisted Friction Stir Welded Ti-6Al-4V Alloy. Mater. Des. 2017, 113, 37–46. DOI: https://doi.org/10.1016/j.matdes.2016.10.012.
- Knipling, K.; Fonda, R. Texture Development in the Stir Zone of near-α Titanium Friction Stir Welds. Scr. Mater. 2009, 60, 1097–1100. DOI: https://doi.org/10.1016/j.scriptamat.2009.02.050.
- Zhang, Y.; Sato, Y.; Kokawa, H.; Park, S.; Hirano, S. Grain Structure and Microtexture in Friction Stir Welded Commercial Purity Titanium. Sci. Technol. Weld. Joining. 2010, 15, 500–505. DOI: https://doi.org/10.1179/136217110X12785889549624.
- Mandal, S.; Sivaprasad, P.; Sarma, V. Dynamic Recrystallization in a Ti Modified Austenitic Stainless Steel during High Strain Rate Deformation. Mater. Manuf. Process. 2010, 25, 54–59. DOI: https://doi.org/10.1080/10426910903162985.
- Li, S. Orientation Stability in Equal Channel Angular Extrusion. Part II: Hexagonal Close-packed Materials. Acta Mater. 2008, 56, 1031–1043. DOI: https://doi.org/10.1016/j.actamat.2007.11.003.
- Fonda, R.; Knipling, K.; Rowenhorst, D. EBSD Analysis of Friction Stir Weld Textures. JOM. 2014, 66, 149–155. DOI: https://doi.org/10.1007/s11837-013-0802-1.
- Cabibbo, M.; Zherebtsov, S.; Mironov, S.; Salishchev, G. Loss of Coherency and Interphase α/β Angular Deviation from the Burgers Orientation Relationship in a Ti-6Al-4V Alloy Compressed at 800° C. J. Mater. Sci. 2013, 48, 1100–1110. DOI: https://doi.org/10.1007/s10853-012-6842-z.
- Imatani, Y.; Oue, S.; Kobayashi, A.; Takahashi, T.; Goto, Y.; Nakano, H. Effect of Surface Texture of Steel Sheets on the Crystal Orientation Relationship between Zinc and Iron on Electrogalvanized Steel Sheets. Mater. Trans. 2020, 61, 142–149. DOI: https://doi.org/10.2320/matertrans.MT-M2019288.
- Begley, B.; Markham, K.; Mizak, M.; Pilchak, A.; Miller, V. Prediction of Relative Globularization Rates in α+β Titanium Alloys as a Function of Initial Crystal Orientation. J. Mater. Res. 2020, 35, 1113–1120. DOI: https://doi.org/10.1557/jmr.2020.54.
- Guilmeau, E.; Barbier, T.; Maignan, A.; Chateigner, D. Thermoelectric Anisotropy and Texture of Intercalated TiS2. Appl. Phys. Lett. 2017, 111, 1–4. DOI: https://doi.org/10.1063/1.4998952.
- Fonda, R.; Knipling, K. Texture Development in Friction Stir Welds. Sci. Technol. Weld. Join. 2011, 16, 288–294. DOI: https://doi.org/10.1179/1362171811Y.0000000010.
- Kitsuya, S.; Ohtsubo, H.; Fujita, N.; Ichimiya, K.; Hase, K. Effect of Crystallographic Texture on Anisotropy of Mechanical Properties in High Strength Martensitic Steel. ISIJ Int. 2020, 60, 346–351. DOI: https://doi.org/10.2355/isijinternational.ISIJINT-2019-164.
- Amirov, A.; Eliseev, A.; Beloborodov, V.; Chumaevskii, A.; Gurianov, D. Formation of α’titanium Welds by Friction Stir Welding. J. Phys. 2020, 1611, 1–6. DOI: https://doi.org/10.1088/1742-6596/1611/1/012001.
- Kosturek, R.; Wachowski, M.; Ślęzak, T.; Śnieżek, L.; Mierzyński, J.; Sobczak, U.; Almerich-Chulia, A. I. Research on the Friction Stir Welding of Titanium Grade 1. MATEC Web Conf. 2018, 242, 1–5. DOI: https://doi.org/10.1051/matecconf/201824201006.
- Taylor, G. Plastic Strain in Metals. J. Inst. Met. 1938, 62, 307–324.
- Zheng, G.; Tang, B.; Zhou, Q.; Mao, X.; Dang, R. Development of a Flow Localization Band and Texture in a Forged near-α Titanium Alloy. Metals. 2020, 10, 1–10. DOI: https://doi.org/10.3390/met10010121.