References
- Kaltenboeck, G.; Demetriou, M. D.; Roberts, S.; Johnson, W. L. Shaping Metallic Glasses by Electromagnetic Pulsing. Nat. Commun. 2016, 7, 10576. DOI: https://doi.org/10.1038/ncomms10576.
- Wang, Z.; Huang, L.; Li, J.; Li, X.; Zhu, H.; Ma, F.; Ma, H.; Cui, J. Microstructure and Properties of Friction Stir Welded 2219 Aluminum Alloy under Heat Treatment and Electromagnetic Forming Process. Metals. 2018, 8, 305. DOI: https://doi.org/10.3390/met8050305.
- Cui, X.; Zhang, Z.; Yu, H.; Xiao, X.; Cheng, Y. Springback Calibration of a U-Shaped Electromagnetic Impulse Forming Process. Metals. 2019, 9, 603. DOI: https://doi.org/10.3390/met9050603.
- Shrivastava, A.; Telang, A.; Jha, A. K.; Ahmed, M. Experimental and Numerical Study on the Influence of Process Parameters in Electromagnetic Compression of AA6061 Tube. Mater. Manuf. Process. 2019, 34(13), 1537–1548. DOI: https://doi.org/10.1080/10426914.2019.1655156.
- Satonkar, N.; Gopalan, V. A. Review on Electromagnetic Sheet Metal Forming of Continuum Sheet Metals. SAE Int. J. Mate. Manuf. 2019, 12, 121–134. DOI: https://doi.org/10.2307/26840412.
- Qiu, L.; Yi, N.; Abu-Siada, A.; Tian, J.; Fan, Y.; Deng, K.; Xiong, Q.; Jiang, J. Electromagnetic Force Distribution and Forming Performance in Electromagnetic Forming with Discretely Driven Rings. IEEE Access. 2020, 8, 16166–16173. DOI: https://doi.org/10.1109/ACCESS.2020.2967096.
- Cao, Q.; Du, L.; Li, Z.; Li, L.; Li, Z.; Li, X.; Lai, Z.; Chen, M.; Chen, Q.; Xu, S.;; et al. Investigation of the Lorentz-force-driven Sheet Metal Stamping Process for Cylindrical Cup Forming. J. Mater. Process. Tech. 2019, 271, 532–541. DOI: https://doi.org/10.1016/j.jmatprotec.2019.03.002.
- Duan, L.; Jiang, H.; Zhang, X.; Li, G.; Cui, J. Experimental Investigations of Electromagnetic Punching Process in CFRP Laminate. Mater. Manuf. Process. 2021, 36, 223–234. DOI: https://doi.org/10.1080/10426914.2020.1819546.
- Cao, Q.; Xia, L.; Li, X.; Du, L.; Lai, Z.; Han, X.; Li, L. The Importance of Coil Conductivity and Eddy Current Effects in the Analysis of Electromagnetic Forming Process. High Voltage. 2021, 1–16. DOI: https://doi.org/10.1049/hve2.12109.
- Cao, Q.; Lai, Z.; Xiong, Q.; Chen, Q.; Ding, T.; Han, X.; Li, L. Electromagnetic Attractive Forming of Sheet Metals by Means of a Dual-frequency Discharge Current: Design and Implementation. Int. J. Adv. Manuf. Technol. 2017, 90, 309–316. DOI: https://doi.org/10.1007/s00170-016-9329-2.
- Xiong, Q.; Yang, M.; Tang, H.; Huang, H.; Song, X.; Qiu, L.; Yu, K.; Cao, Q. Flaring Forming of Small Tube Based on Electromagnetic Attraction. IEEE Access. 2020, 8, 104753–104761. DOI: https://doi.org/10.1109/ACCESS.2020.2999125.
- Batygin, Y. V.; Golovashchenko, S. F.; Gnatov, A. V. Pulsed Electromagnetic Attraction of Nonmagnetic Sheet Metals. J. Mater. Process. Tech. 2014, 214, 390–401. DOI: https://doi.org/10.1016/j.jmatprotec.2013.09.018.
- Ouyang, S.; Li, X.; Li, C.; Du, L.; Peng, T.; Han, X.; Li, L.; Lai, Z.; Cao, Q. Investigation of the Electromagnetic Attractive Forming Utilizing a Dual-coil System for Tube Bulging. J. Manuf. Process. 2020, 49, 102–115. DOI: https://doi.org/10.1016/j.jmapro.2019.11.006.
- Ouyang, S.; Li, C.; Du, L.; Li, X.; Lai, Z.; Peng, T.; Han, X.; Cao, Q.; Li, L. Electromagnetic Forming of Aluminum Alloy Sheet Metal Utilizing A Low-frequency Discharge: A New Method for Attractive Forming. J. Mater. Process. Tech. 2021, 291, 117001. DOI: https://doi.org/10.1016/j.jmatprotec.2020.117001.
- Lai, Z.; Cao, Q.; Chen, M.; Liu, N.; Li, X.; Huang, Y.; Han, X.; Li, L. The Effect of Coil Polarity on Electromagnetic Forming Using a Multi-coil System. Int. J. Adv. Manuf. Technol. 2019, 103(1), 1555–1566. DOI: https://doi.org/10.1007/s00170-019-03656-8.
- Mamalis, A. G.; Manolakos, D. E.; Kladas, A. G.; Koumoutsos, A. K. Electromagnetic Forming Tools and Processing Conditions: Numerical Simulation. Mater. Manuf. Process. 2006, 21, 411–423. DOI: https://doi.org/10.1080/10426910500411785.
- Paese, E.; Geier, M.; Homrich, R. P.; Pacheco, J. L. Simplified Mathematical Modeling for an Electromagnetic Forming System with Flat Spiral Coil as Actuator. J. Braz. Soc. Mech. Sci. 2011, 33, 324–331. DOI: https://doi.org/10.1590/S1678-58782011000300008.
- Paese, E.; Rosa, P. A. R.; Geier, M.; Homrich, R. P.; Rossi, R. An Analysis of Electromagnetic Sheet Metal Forming Process. Appl. Mech. Mater. 2014, 526, 9–14.DOI: https://doi.org/10.4028/scientific.net/AMM.526.9
- Cao, Q.; Li, Z.; Lai, Z.; Li, Z.; Han, X.; Li, L. Analysis of the Effect of an Electrically Conductive Die on Electromagnetic Sheet Metal Forming Process Using the Finite Element-circuit Coupled Method. Int. J. Adv. Manuf. Technol. 2019, 101, 549–563. DOI: https://doi.org/10.1007/s00170-018-2798-8.
- Yu, H.; Li, C.; Deng, J. Sequential Coupling Simulation for Electromagnetic–mechanical Tube Compression by Finite Element Analysis. J. Mater. Process. Tech. 2009, 209, 707–713. DOI: https://doi.org/10.1016/j.jmatprotec.2008.02.061.
- Cao, Q.; Han, X.; Lai, Z.; Xiong, Q.; Zhang, X.; Chen, Q.; Xiao, H.; Li, L. Analysis and Reduction of Coil Temperature Rise in Electromagnetic Forming. J. Mater. Process. Tech. 2015, 225, 185–194. DOI: https://doi.org/10.1016/j.jmatprotec.2015.02.006.
- Qiu, L.; Wang, C.; Abu-Siada, A.; Xiong, Q.; Zhang, W.; Wang, B.; Yi, N.; Li, Y.; Cao, Q. Coil Temperature Rise and Workpiece Forming Efficiency of Electromagnetic Forming Based on Half-Wave Current Method. IEEE Access. 2020, 8, 9371–9379. DOI: https://doi.org/10.1109/ACCESS.2020.2965254.
- Qiu, L.; Deng, K.; Li, Y.; Tian, X.; Xiong, Q.; Chang, P.; Su, P.; Huang, L. Analysis of Coil Temperature Rise in Electromagnetic Forming with Coupled Cooling Method. Int. J. Appl. Electromagn. Mech. 2020, 63(1), 45–58. DOI: https://doi.org/10.3233/JAE-190062.
- Du, L.; Xia, L.; Li, X.; Qiu, L.; Lai, Z.; Chen, Q.; Cao, Q.; Han, X.; Li, L. Adjustable Current Waveform via Altering the Damping Coefficient: A New Way to Reduce Joule Heating in Electromagnetic Forming Coils. J. Mater. Process. Technol. 2021, 293, 117086. DOI: https://doi.org/10.1016/j.jmatprotec.2021.117086.