References
- Britton, R. D.; Elcoate, C. D.; Alanou, M. P.; Evans, H. P.; Snidle, R. W. Effect of Surface Finish on Gear Tooth Friction. J. Tribol. 2000, 122(1), 354. DOI: https://doi.org/10.1115/1.555367.
- Le Bot, A.;Noise of Sliding Rough Contact. Journal of Physics: Conference Series. 2017, 7975, 6–12. DOI:https://doi.org/10.1088/1742-6596/797/1/012006.
- Masseth, J.; Kolivand, M.; Studying the Effects of Lapping Process on Hypoid Gears Surface Finish and Transmission Errors. Proc. ASME. 2007, 480867, 759–765. DOI:https://doi.org/10.4271/2007-01-2229.
- Misra, J. P.; Jain, P. K.; Dwivedi, D. K.; Mehta, N. K. Study of Time Dependent Behaviour of ECH of Bevel Gears. Procedia Eng. 2013, 64(7), 1259–1266. DOI: https://doi.org/10.1016/j.proeng.2013.09.206.
- Xu, Y.; Zhang, K.; Lu, S.; Liu, Z.; Experimental Investigations into Abrasive Flow Machining of Helical Gear. Digit. Des. Manuf. Technol. 2013, 5466, 65–69. http://10.4028/www.scientific.net/KEM.546.65.
- Kenda, J.; Duhovnik, J.; Tavcar, J.; Kopac, J. Abrasive Flow Machining Applied to Plastic Gear Matrix Polishing. Int. J. Adv. Manuf. Technol. 2014, 71(4), 141–151. DOI: https://doi.org/10.1007/s00170-013-5461-4.
- Nagdeve, L.; Jain, V. K.; Ramkumar, J. Nanofinishing of Freeform/Sculptured Surfaces: State-of-the-Art. J. Manuf. Rev. 2018, 6(3), 1–20.
- Das, M.; Jain, V. K.; Ghoshdastidar, P. S. Computational Fluid Dynamics Simulation and Experimental Investigations into the Magnetic-Field-Assisted Nano-Finishing Process. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 2012, 226(7), 1143–1158. DOI: https://doi.org/10.1177/0954405412440230.
- Zhong, Z.-W.;. Advanced Polishing, Grinding and Finishing Processes for Various Manufacturing Applications: A Review. Mater. Manuf. Process. 2020, 35(12), 1279–1303. DOI: https://doi.org/10.1080/10426914.2020.1772481.
- Kumar, M.; Kumar, A.; Alok, A.; Das, M. Magnetorheological Method Applied to Optics Polishing: A Review. IOP Conf. Ser. Mater. Sci. Eng. 2020, 804(1), 12–13. DOI: https://doi.org/10.1088/1757-899X/804/1/012012.
- Sambharia, J. K.; Mali, H. S.; Garg, V. Experimental Investigation on Unidirectional Abrasive Flow Machining of Trim Die Workpiece. Mater. Manuf. Process. 2018, 33(6), 651–660. DOI: https://doi.org/10.1080/10426914.2017.1364847.
- Das, M.; Jain, V. K.; Ghoshdastidar, P. S. The Out-of-Roundness of the Internal Surfaces of Stainless Steel Tubes Finished by the Rotational–Magnetorheological Abrasive Flow Finishing Process. Mater. Manuf. Process. 2011, 26(8), 1073–1084. DOI: https://doi.org/10.1080/10426914.2010.537141.
- Miyake, T.; Yamamoto, A.; Kishimoto, W.; Yamanaka, K.; Takano, K. Study of Burr Formation in Face Milling (1st Report). Journal of the Japan Society for Precision Engineering. 1987, 53(1), 98–104. DOI: https://doi.org/10.2493/jjspe.53.98.
- Karpuschewski, B.; Knoche, H.-J.; Hipke, M. Gear Finishing by Abrasive Processes. CIRP Ann. Manuf. Technol. 2008, 57(2), 621–640. DOI: https://doi.org/10.1016/j.cirp.2008.09.002.
- Fujisawa, Y.; Komori, M. Method for Removing Burrs and Pits from Small Gears Using a Gear-Shaped Tool Composed of Glass-Fiber-Reinforced Plastic. J. Mater. Process. Technol. 2010, 210(9), 1159–1170. DOI: https://doi.org/10.1016/j.jmatprotec.2010.02.025.
- Gillespie, L. K.;. Deburring and Edge Finishing Handbook; United States: Society of Manufacturing Engineers, 1999.
- Kawasaki, Y.; Shinoda, M.; Nojiri, S.; Hayashi, A.; Hoshi, T. Development of a New Automatic Gear Selecting Machine for Automobile Transaxle Manufacturing. CIRP Ann. 1984, 33(1), 363–368. DOI: https://doi.org/10.1016/S0007-8506(07)61443-7.
- Yi, J.; Ding, Y.; Zhao, S.; Ji, B.; Zhou, J. A Novel Technique of Polishing Gear Working Surface Using PECMP. Int. J. Precis. Eng. Manuf. 2009, 10(4), 57–62. DOI: https://doi.org/10.1007/s12541-009-0071-7.
- Fujisawa, Y.; Komori, M. Surface Finishing Method for Tooth Flank of Heat-Treated Surface-Hardened Small Gears Using a Gear-Shaped Tool Composed of Alumina-Fiber-Reinforced Plastic. Precis. Eng. 2015, 39(5), 234–242. DOI: https://doi.org/10.1016/j.precisioneng.2014.10.003.
- Misra, J. P.; Jain, P. K.; Dwivedi, D. K. Precision Finishing of Gears by Electrochemical Honing Process: A State of Art Review. J. Adv. Manuf. Syst. 2011, 10(2), 309–327. DOI: https://doi.org/10.1142/S0219686711002223.
- Das, M.; Jain, V. K.; Ghoshdastidar, P. S. Nano-Finishing of Stainless-Steel Tubes Using Rotational Magnetorheological Abrasive Flow Finishing Process. Mach. Sci. Technol. 2010, 14(3), 365–389. DOI: https://doi.org/10.1080/10910344.2010.511865.
- Das, M.; Jain, V. K.; Ghoshdastidar, P. S. Nanofinishing of Flat Workpieces Using Rotational–Magnetorheological Abrasive Flow Finishing (R-MRAFF) Process. Int. J. Adv. Manuf. Technol. 2012, 62(1–4), 405–420. DOI: https://doi.org/10.1007/s00170-011-3808-2.
- Yadav, R. D.; Singh, A. K. A Novel Magnetorheological Gear Profile Finishing with High Shape Accuracy. Int. J. Mach. Tools Manuf. 2019, 139(19), 75–92. DOI: https://doi.org/10.1016/j.ijmachtools.2019.02.001.
- Sidpara, A.; Jain, V. K. Nano–level Finishing of Single Crystal Silicon Blank Using Magnetorheological Finishing Process. Tribol. Int. 2012, 47(5), 159–166. DOI: https://doi.org/10.1016/j.triboint.2011.10.008.
- Ginder, J. M.; Davis, L. C.; Elie, L. D. Rheology of MAGNETORHEOLOGICAL Fluids: Models and Measurements. . International Journal of Modern Physics B. 1996, 10(23n24), 11. DOI: https://doi.org/10.1142/S0217979296001744.
- Claracq, J.; Sarrazin, J.; Montfort, J.-P. Viscoelastic Properties of Magnetorheological Fluids. Rheologica Acta. 2004, 43(1), 38–49. DOI: https://doi.org/10.1007/s00397-003-0318-7.
- Alam, Z.; Khan, A.; Jha, S. A Study on the Effect of Polishing Fluid Volume in Ball End Magnetorheological Finishing Process. Mater. Manuf. Process. 2018, 33(11), 1197–1204. DOI: https://doi.org/10.1080/10426914.2017.1364760.
- Jha, S.; Jain, V. K. Modeling and Simulation of Surface Roughness in Magnetorheological Abrasive Flow Finishing (MRAFF) Process. Wear. 2006, 261(7–8), 856–866. DOI: https://doi.org/10.1016/j.wear.2006.01.043.
- Arora, K.; Singh, A. K. Magnetorheological Finishing of UHMWPE Acetabular Cup Surface and Its Performance Analysis. Materials and Manufacturing Processes. 2020, 35(14), 1631–1649. DOI: https://doi.org/10.1080/10426914.2020.1784928.
- Paswan, S. K.; Bedi, T. S.; Singh, A. K. Modeling and Simulation of Surface Roughness in Magnetorheological Fluid Based Honing Process. Wear. 2017, 376-377(6), 1207–1221. DOI: https://doi.org/10.1016/j.wear.2016.11.025.
- Sivaprakasam, P.; Hariharan, P.; Gowri, S. Optimization of Micro-WEDM Process of Aluminum Matrix Composite (A413-B 4C): A Response Surface Approach. . Materials and Manufacturing Processes. 2013, 28(12), 1340–1347. DOI: https://doi.org/10.1080/10426914.2013.823502.
- Aldrin Raj, J.; Balasubramanian, K.; Palanisamy, D.; AGS, E. Experimental Investigations on WEDM Process for Machining High Manganese Steel. Mater. Manuf. Process, 2020, 3514, 1612–1621 https://doi.org/10.1080/10426914.2020.1779941
- Khan, D. A.; Jha, S. Synthesis of Polishing Fluid and Novel Approach for Nanofinishing of Copper Using Ball-End Magnetorheological Finishing Process. Mater. Manuf. Process. 2018, 33(11), 1150–1159. DOI: https://doi.org/10.1080/10426914.2017.1328112.