References
- Sivananth, V.; Vijayarangan, S.; Rajamanickam, N. Evaluation of Fatigue and Impact Behavior of Titanium Carbide Reinforced Metal Matrix Composites. Mater. Sci. Eng. A. 2014, 597, 304–313. DOI: https://doi.org/10.1016/j.msea.2014.01.004.
- Prabu, S. B.; Karunamoorthy, L.; Kathiresan, S.; Mohan, B. Influence of Stirring Speed and Stirring Time on Distribution of Particles in Cast Metal Matrix Composite. J. Mater. Process. Technol. 2006, 171(2), 268–273. DOI: https://doi.org/10.1016/j.jmatprotec.2005.06.071.
- Patel, K. M.; Pandey, P. M.; Rao, P. V. Study on Machinabilty of Al2O3 Ceramic Composite in EDM Using Response Surface Methodology. J. Eng. Mater. Technol. 2011, 133(2), 021004. DOI: https://doi.org/10.1115/1.4003100.
- Inegbenebor, A. O.; Bolu, C. A.; Babalola, P. O.; Inegbenebor, A. I.; Sunday, F. O. Influence of the Grit Size of Silicon Carbide Particles on the Mechanical and Electrical Properties of Stir Casting Aluminum Matrix Composite Material. Silicon. 2016, 8(4), 573–578. DOI: https://doi.org/10.1007/s12633-015-9305-8.
- Gay, D. Composite Materials: Design and Applications, 3rd ed.; CRC Press: Boca Raton, FL, 2014.
- Aleksendric, D.; Carlone, P. Soft Computing in the Design and Manufacturing of Composite Materials: Applications to Brake Friction and Thermoset Matrix Composites; Woodhead Publishing: Cambridge, England, 2015.
- Suthar, J.; Patel, K. M. Processing Issues, Machining, and Applications of Aluminum Metal Matrix Composites. Mater. Manuf. Process. 2018, 33(5), 499–527. DOI: https://doi.org/10.1080/10426914.2017.1401713.
- Manna, A.; Bains, H. S.; Mahapatra, P. B. Experimental Study on Fabrication of Al—Al2O3/Grp Metal Matrix Composites. J. Compos. Mater. 2011, 45(19), 2003–2010. DOI: 10.1177%2F0021998310394691.
- Radhika, N.; Subramanian, R. Effect of Reinforcement on Wear Behaviour of Aluminium Hybrid Composites. Tribol. - Mater. Surf. Interfaces. 2013, 7(1), 36–41. DOI: https://doi.org/10.1179/1751584X13Y.0000000025.
- Asif, M.; Chandra, K.; Misra, P. S. Development of Aluminium Based Hybrid Metal Matrix Composites for Heavy Duty Applications. J. Miner. Mater. Charact. Eng. 2011, 10(14), 1337–1344. DOI: https://doi.org/10.4236/jmmce.2011.1014105.
- Premnath, A. A.; Alwarsamy, T.; Rajmohan, T. Experimental Investigation and Optimization of Process Parameters in Milling of Hybrid Metal Matrix Composites. Mater. Manuf. Process. 2012, 27(10), 1035–1044. DOI: https://doi.org/10.1080/10426914.2012.677911.
- Karthik, S.; Prakash, K. S.; Gopal, P. M.; Jothi, S. Influence of Materials and Machining Parameters on WEDM of Al/AlCoCrFeNiMo0.5 MMC. Mater. Manuf. Process. 2019, 34(7), 759–768. DOI: https://doi.org/10.1080/10426914.2019.1594250.
- Singh, J.; Chauhan, A. Characterization of Hybrid Aluminum Matrix Composites for Advanced Applications – A Review. J. Mater. Res. Technol. 2016, 5(2), 159–169. DOI: https://doi.org/10.1016/j.jmrt.2015.05.004.
- Rajmohan, T.; Palanikumar, K. Experimental Investigation and Analysis of Thrust Force in Drilling Hybrid Metal Matrix Composites by Coated Carbide Drills. Mater. Manuf. Process. 2011, 26(8), 961–968. DOI: https://doi.org/10.1080/10426914.2010.523915.
- Ravi Kumar, K.; Kiran, K.; Sreebalaji, V. S. Micro Structural Characteristics and Mechanical Behaviour of Aluminium Matrix Composites Reinforced with Titanium Carbide. J. Alloys Compd. 2017, 723, 795–801. DOI: https://doi.org/10.1016/j.jallcom.2017.06.309.
- Mavhungu, S. T.; Akinlabi, E. T.; Onitiri, M. A.; Varachia, F. M. Aluminum Matrix Composites for Industrial Use: Advances and Trends. Procedia Manuf. 2017, 7, 178–182. DOI: https://doi.org/10.1016/j.promfg.2016.12.045.
- Koli, D. K.; Agnihotri, G.; Purohit, R. Advanced Aluminium Matrix Composites: The Critical Need of Automotive and Aerospace Engineering Fields. Mater. Today Proc. 2015, 2(4–5), 3032–3041. DOI: https://doi.org/10.1016/j.matpr.2015.07.290.
- Dhanalakshmi, S.; Rameshbabu, T. Multi-Aspects Optimization of Process Parameters in CNC Turning of LM 25 Alloy Using the Taguchi-Grey Approach. Metals (Basel). 2020, 10(4), 453. DOI: https://doi.org/10.3390/met10040453.
- Thankachan, T. P. Production and Machining Performance Study of Nano Al2O3 Particle Reinforced LM25 Aluminum Alloy Composites. J. Appl. Mech. Tech. Phys. 2019, 60(1), 136–143. DOI: https://doi.org/10.1134/S0021894419010176.
- Altunpak, Y.; Akbulut, H. Effects of Aging Heat Treatment on Machinability of Alumina Short Fiber Reinforced LM 13 Aluminum Alloy. Int. J. Adv. Manuf. Technol. 2009, 43(5–6), 449–454. DOI: https://doi.org/10.1007/s00170-008-1724-x.
- Dhanalakshmi, S.; Rameshbabu, T. Comparative Study of Parametric Influence on Wet and Dry Machining of LM 25 Aluminium Alloy. Mater. Today Proc. 2021, 39(1), 48-53. DOI: https://doi.org/10.1016/j.matpr.2020.06.101.
- Katamreddy, S. C.; Punnath, N.; Radhika., N. Multi-response Optimisation of Machining Parameters in Electrical Discharge Machining of Al LM25/AlB2 Functionally Graded Composite Using Grey Relation Analysis. Int. J. Mach. Mach. Mater. 2018, 20(3), 193–213.
- Udaya, P. J.; Moorthy, T. V. Adhesive Wear Behaviour of Aluminium Alloy/Fly Ash Composites. Adv. Mat. Res. 2012, 622–623, 1290–1294.
- Sharma, V. K.; Singh, R. C.; Chaudhary, R. Effect of Flyash Particles with Aluminium Melt on the Wear of Aluminium Metal Matrix Composites. Eng. Sci. Technol. Int. J. 2017, 20(4), 1318–1323.
- Subramaniam, B.; Natarajan, B.; Kaliyaperumal, B.; Chelladurai, S. J. S. Investigation on Mechanical Properties of Aluminium 7075 - Boron Carbide - Coconut Shell Fly Ash Reinforced Hybrid Metal Matrix Composites. China Foundry. 2018, 15(6), 449–456. DOI: https://doi.org/10.1007/s41230-018-8105-3.
- Kavimani, V.; Soorya Prakash, K.; Thankachan, T. Multi-Objective Optimization in WEDM Process of Graphene – SiC-Magnesium Composite through Hybrid Techniques. Measurement (Lond.). 2019, 145, 335–349.
- Sharma, V. K.; Singh, R. C.; Chaudhary, R. Wear and Friction Behaviour of Aluminium Metal Composite Reinforced with Graphite Particles. Int. J. Surf. Sci. Eng. 2018, 12(5/6), 419. DOI: https://doi.org/10.1504/IJSURFSE.2018.096753.
- Sahoo, B.; Kumar, R.; Joseph, J.; Sharma, A.; Paul, J. Preparation of Aluminium 6063-Graphite Surface Composites by an Electrical Resistance Heat Assisted Pressing Technique. Surf. Coat. Technol. 2017, 309, 563–572. DOI: https://doi.org/10.1016/j.surfcoat.2016.12.011.
- Alaneme, K. K.; Sanusi, K. O. Microstructural Characteristics, Mechanical and Wear Behaviour of Aluminium Matrix Hybrid Composites Reinforced with Alumina, Rice Husk Ash and Graphite. Eng. Sci. Technol. Int. J. 2015, 18(3), 416–422.
- Manikandan, N.; Arulkirubakaran, D.; Palanisamy, D.; Raju, R. Influence of Wire-EDM Textured Conventional Tungsten Carbide Inserts in Machining of Aerospace Materials (Ti–6al–4v Alloy). Mater. Manuf. Process. 2019, 34(1), 103–111. DOI: https://doi.org/10.1080/10426914.2018.1544712.
- Patel, K. M.; Pandey, P. M.; Rao, P. V. Determination of an Optimum Parametric Combination Using a Surface Roughness Prediction Model for EDM of Al2O3/SiCw/TiC Ceramic Composite. Mater. Manuf. Process. 2009, 24(6), 675–682. DOI: https://doi.org/10.1080/10426910902769319.
- Palanisamy, D.; Devaraju, A.; Manikandan, N.; Balasubramanian, K.; Arulkirubakaran, D. Experimental Investigation and Optimization of Process Parameters in EDM of Aluminium Metal Matrix Composites. Mater. Today. Proc. 2020, 22, 525–530. DOI: https://doi.org/10.1016/j.matpr.2019.08.145.
- Manikandan, N.; Binoj, J. S.; Varaprasad, K. C.; Sree Sabari, S.; Raju, R. Investigations on Wire Spark Erosion Machining of Aluminum-Based Metal Matrix Composites. In Lecture Notes in Mechanical Engineering; Springer Singapore: Singapore, 2019; pp 361–369. DOI: https://doi.org/10.1007/978-981-13-6374-0_42.
- Pujara, J. M.; Kothari, K. D.; Gohil, A. V. Process Parameter Optimization for MRR and Surface Roughness during Machining LM6 Aluminum MMC on WEDM. Adv. Eng. For. 2017, 20, 42–50. www.scientific.net DOI:https://doi.org/10.4028/AEF.20.42.
- Manikandan, N.; Balasubramanian, K.; Palanisamy, D.; Gopal, P. M.; Arulkirubakaran, D.; Binoj, J. S. Machinability Analysis and ANFIS Modelling on Advanced Machining of Hybrid Metal Matrix Composites for Aerospace Applications. Mater. Manuf. Process. 2019, 34(16), 1866–1881. DOI: https://doi.org/10.1080/10426914.2019.1689264.
- Manikandan, N.; Raju, R.; Palanisamy, D.; Binoj, J. S. Optimisation of Spark Erosion Machining Process Parameters Using Hybrid Grey Relational Analysis and Artificial Neural Network Model. Int. J. Mach. Mach. Mater. 2020, 22(1), 1–23. DOI: https://doi.org/10.1504/IJMMM.2020.104007.
- Phate, M. R.; Toney, S. B. Modeling and Prediction of WEDM Performance Parameters for Al/SiCp MMC Using Dimensional Analysis and Artificial Neural Network. Eng. Sci. Technol. Int. J. 2018, 22(2), 468–476. DOI: https://doi.org/10.1016/j.jestch.2018.12.002.