References
- Xu, Z.; Li, Z.; Ji, S.; Zhang, L. Refill Friction Stir Spot Welding of 5083-O Aluminium Alloy. J. Mater. Sci. Technol. 2018, 34(5), 878–885. DOI: https://doi.org/10.1016/j.jmst.2017.02.011.
- Karthikeyan, R.; Balasubramanian, V. Statistical Optimization and Sensitivity Analysis of Friction Stir Spot Welding Process Parameters for Joining AA 7075 Aluminium Alloy. Exp. Tech. 2013, 37, 6–15. DOI: https://doi.org/10.1111/j.1747-1567.2011.00746.x.
- Boccarusso, L.; Astarita, A.; Carlone, P.; Scherillo, F.; Rubino, F.; Squillace, A. Dissimilar Friction Stir Lap Welding of AA 6082 - Mg AZ31: Force Analysis and Microstructure Evolution. J. Manuf. Proc. 2019, 44, 376–388. DOI: https://doi.org/10.1016/j.jmapro.2019.06.022.
- Uğurlu, M.; Çakan, A. The Effect of Tool Rotation Speed on Mechanical Properties of Friction Stir Spot Welded (FSSW) AA7075-T6 Aluminium Alloy Sheets. Euro. Mech. Sci. 2019, 3(3), 97–101. DOI: https://doi.org/10.26701/ems.520139.
- Pattanaik, A. K.; Pradhan, S.; Panda, S. N.; Bagala, D. K.; Pal, K.; Patnaik, D. Effect of Process Parameters on Friction Stir Spot Welding Using Grey Based Taguchi Methodology. Mater. Today: Proc. 2018, 5, 12098–12102.
- Tran, V.-X.; Pan, J.; Pan, T. Effects of Processing Time on Strengths and Failure Modes of Dissimilar Spot Friction Welds between Aluminum 5754-O and 7075-T6 Sheets. J. Mater. Process. Technol. 2009, 209(8), 3724–3739. DOI: https://doi.org/10.1016/j.jmatprotec.2008.08.028.
- Rubino, F.; Scherillo, F.; Franchitti, S.; Squillace, A.; Astarita, A.; Carlone, P. Microstructure and Surface Analysis of Friction Stir Processed Ti-6Al-4V Plates Manufactured by Electron Beam Melting. J. Manuf. Proc. 2019, 37, 392–401. DOI: https://doi.org/10.1016/j.jmapro.2018.12.015.
- Paulo, R. M. F.; Rubino, F.; Valente, R. A. F.; Teixeira-Dias, F.; Carlone, P. Modelling of Friction Stir Welding and Its Influence on the Structural Behaviour of Aluminium Stiffened Panels. Thin-Walled Struct. 2020, 157, 107128. DOI: https://doi.org/10.1016/j.tws.2020.107128.
- Nandan, R.; DebRoy, T.; Bhadeshia, H. K. D. H. Recent Advances in Friction-stir Welding – Process, Weldment Structure and Properties. Prog. Mater. Sci. 2008, 53, 980–1023. DOI: https://doi.org/10.1016/j.pmatsci.2008.05.001.
- Su, P.; Gerlich, A.; North, T. H.; Bendzsak, G. J. Intermixing in Dissimilar Friction Stir Spot Welds. Metall. Mater. Trans. A. 2007, 38, 584–595. DOI: https://doi.org/10.1007/s11661-006-9067-4.
- Carlone, P.; Astarita, A.; Rubino, F.; Pasquino, N. Microstructural Aspects in FSW and TIG Welding of Cast ZE41A Magnesium Alloy. Metall. Mater. Trans. B. 2016, 47, 1340–1346. DOI: https://doi.org/10.1007/s11663-015-0536-2.
- Mehta, K. P.; Carlone, P.; Astarita, A.; Scherillo, F.; Rubino, F.; Vora, P. Conventional and Cooling Assisted Friction Stir Welding of AA6061 and AZ31B Alloys. Mater. Sci. Eng. A. 2019, 759, 252–261. DOI: https://doi.org/10.1016/j.msea.2019.04.120.
- Siddharth, S.; Senthilkumar, T. Optimization of Friction Stir Spot Welding Process Parameters of Dissimilar Al5083 and C10100 Joints Using Response Surface Methodology. Russ. J. Non-Ferr. Met. 2016, 57, 456–466. DOI: https://doi.org/10.3103/S1067821216050151.
- Zhang, G.; Xiao, C.; Ojo, O. O. Dissimilar Friction Stir Spot Welding of AA2024-T3/AA7075-T6 Aluminium Alloys under Different Welding Parameters and Media. Def. Technol. 2021, 17(2), 531–544. DOI: https://doi.org/10.1016/j.dt.2020.03.008.
- Ibrahim, I. S.; Yapici, G. G. Application of a Novel Friction Stir Spot Welding Process on Dissimilar Aluminum Joints. J. Manuf. Proc. 2018, 35, 282–288. DOI: https://doi.org/10.1016/j.jmapro.2018.08.018.
- Suna, Y.; Morisada, Y.; Fujii, H.; Tsuji, N. Ultrafine Grained Structure and Improved Mechanical Properties of Low Temperature Friction Stir Spot Welded 6061-T6 Al Alloys. Mater. Charact. 2018, 135, 124–133. DOI: https://doi.org/10.1016/j.matchar.2017.11.033.
- Suresh, S.; Venkatesan, K.; Natarajan, E.; Rajesh, S. Influence of Tool Rotational Speed on the Properties of Friction Stir Spot Welded AA7075-T6/Al2O3 Composite Joint. Mater. Today: Proc. 2020, 27(1), 62–67. DOI: https://doi.org/10.1016/j.matpr.2019.08.220.
- Sekhar, S. R.; Chittaranjandas, V.; Govardhan, D.; Karthikeyan, R. Effect Of Tool Rotational Speed On Friction Stir Spot Welded AA5052 – H38 Aluminum Alloy. Mater. Today: Proc. 2018, 5, 5536–5543. DOI: https://doi.org/10.1016/j.matpr.2017.12.144.
- Jambhale, S.; Kumar, S.; Kumar, S. Characterization and Optimization of Flat Friction Stir Spot Welding of Triple Sheet Dissimilar Aluminium Alloy Joints. Silicon. 2021. DOI: https://doi.org/10.1007/s12633-020-00876-6.
- Gerlich, A.; Avramovic-Cingara, G.; North, T. H. Stir Zone Microstructure and Strain Rate during Al 7075-T6 Friction Stir Spot Welding. Metall. Mater. Trans. A. 2006, 37, 2773–2786. DOI: https://doi.org/10.1007/BF02586110.
- Klobčar, D.; Tušek, J.; Smolej, A.; Simončič, S. Predictions of the Optimized Friction Stir Spot Welding Process Parameters for Joining AA2024 Aluminum Alloy Using RSM. Weld. World 2014, 59, 269–281. DOI: https://doi.org/10.1007/s40194-014-0208-x.
- Pandiyarajan, R.; Maran, P.; Marimuthu, S.; Arumugam, K. Mechanical and Metallurgical Characterization of Friction Stir Welded AA6061- ZrO2-C Hybrid MMCs. Mater. Today: Proc. 2019, 19, 256–259. DOI: https://doi.org/10.1016/j.matpr.2019.06.760.
- Bagheri, B.; MahdianRizi, A. A.; Abbasi, M.; Givi, M. Friction Stir Spot Vibration Welding: Improving the Microstructure and Mechanical Properties of Al5083 Joint. Metallogr. Microstruct. Anal. 2019, 8, 713–725. DOI: https://doi.org/10.1007/s13632-019-00563-y.
- Chu, W.; Li, W. Y.; Yang, X. W.; Shen, J. J.; Vairis, A.; Feng, W. Y.; Wang, W. B. Microstructure and Mechanical Optimization of Probeless Friction Stir Spot Welded Joint of an Al–Li Alloy. J. Mater. Sci. Technol. 2018, 34, 1739–1746. DOI: https://doi.org/10.1016/j.jmst.2018.03.009.
- Patel, V. V.; Sejani, D. J.; Patel, N. J.; Vora, J. J.; Gadhvi, B. J.; Padodara, N. R.; Vamja, C. D. Effect of Tool Rotation Speed on Friction Stir Spot Welded AA5052-H32 and AA6082-T6 Dissimilar Aluminum Alloys. Metallogr. Microstruct. Anal. 2016, 5, 142–148. DOI: https://doi.org/10.1007/s13632-016-0264-2.
- Zhang, C.; Huang, G.; Cao, Y.; Zhu, Y.; Liu, Q. On the Microstructure and Mechanical Properties of Similar and Dissimilar AA7075 and AA2024 Friction Stir Welding Joints: Effect of Rotational Speed. J. Manuf. Proc. 2019, 37, 470–487. DOI: https://doi.org/10.1016/j.jmapro.2018.12.014.
- Avinash, P.; Manikandan, M.; Arivazhagan, N.; Ramkumar, K. D.; Narayanan, S. Friction Stir Welded Butt Joints of AA2024 T3 and AA7075 T6 Aluminum Alloys. Proce. Eng. 2014, 75, 98–102. DOI: https://doi.org/10.1016/j.proeng.2013.11.020.
- Tang, J.; Shen, Y. Numerical Simulation and Experimental Investigation of Friction Stir Lap Welding between Aluminum Alloys AA2024 and AA7075. J. Alloys. Compd. 2016, 666, 493–500. DOI: https://doi.org/10.1016/j.jallcom.2016.01.138.
- Khodir, S. A.; Shibayanagi, T. Friction Stir Welding of Dissimilar AA2024 and AA7075 Aluminum Alloys. Mater. Sci. Eng. 2008, 148(1–3), 82–87. DOI: https://doi.org/10.1016/j.mseb.2007.09.024.