References
- Maximov, J. T.; Duncheva, G. V.; Anchev, A. P.; Dunchev, V. P. Slide Burnishing versus Deep Rolling – A Comparative Analysis. Int. J. Adv. Manuf. Technol. 1923-1939, 2020(110).
- Maximov, J. T.; Duncheva, G. V.; Anchev, A. P.; Dunchev, V. P.; Ichkova, M. D. Improvement in Fatigue Strength of 41Cr4 Steel through Slide Diamond Burnishing. J Braz Soc Mech Sci Eng. 2020, 42:197. DOI: https://doi.org/10.1007/s40430-020-02276-8.
- Maximov, J. T.; Duncheva, G. V.; Anchev, A. P.; Ichkova, M. D. Slide Burnishing – Review and Prospects. Int. J. Adv. Manuf. Technol. 2019, 104(1–4), 785–801. DOI: https://doi.org/10.1007/s00170-019-03881-1.
- Luo, H.; Liu, J.; Wang, L.; Zhong, Q. The Effect of Burnishing Parameters on Burnishing Force and Surface Microhardness. Int. J. Adv. Manuf. Technol. 2006, 28(7–8), 707–713. DOI: https://doi.org/10.1007/s00170-004-2412-0.
- Luo, H.; Liu, J.; Wang, L.; Zhong, Q. Investigation of the Burnishing Process with PCD Tool on Non-ferrous Metals. The International Journal of Advanced Manufacturing Technology. 2005, 25(5–6), 454–459. DOI: https://doi.org/10.1007/s00170-003-1959-5.
- Shiou, F.-J.; Banh, Q.-N. Development of an Innovative Small Ball-burnishing Tool Embedded with a Load Cell. The International Journal of Advanced Manufacturing Technology. 2016, 87(1–4), 31–41. DOI: https://doi.org/10.1007/s00170-016-8413-y.
- Nguen, T. T.; Le, X. B. Optimization of Interior Roller Burnishing Process for Improving Surface Quality. Mater. Manuf. Process. 2018, 33(11), 1233–1241. DOI: https://doi.org/10.1080/10426914.2018.1453159.
- Maximov, J. T.; Duncheva, G. V.; Anchev, A. P.; Dunchev, V. P.; Capec, J. A Cost-effective Optimization Approach for Improving the Fatigue Strength of Diamond-burnished Steel Components. J Braz Soc Mech Sci Eng. 2020. DOI: https://doi.org/10.1007/s40430-020-02723-6.
- Zhang, J.; Pei, Z. J. Characterization Methods for Surface Integrity (Ed., J. Paulo), Surface Integrity in Mashining, Springer – Verlag London Limited; 2010. e-ISBN 978-1-84-882-974-2
- Sedlacek, M.; Podgornik, B.; Vizintin, J. Correlation between Standard Roughness Parameters Skewness and Kurtosis and Tribological Behaviour of Contact Surface. Tribol. Int. 2012, 48, 102–112. DOI: https://doi.org/10.1016/j.triboint.2011.11.008.
- Maximov, J. T.; Duncheva, G. V.; Anchev, A. P.; Dunchev, V. P. Smoothing, Deep or Mixed Diamond Burnishing of Low-alloy Steel Components – Optimization Procedures. J. Adv. Manuf. Technol. 2020, 106, 1917–1929.
- Nguyen, T. T.; Cao, L. H.; Dang, X. P.; Nguyen, T. A.; Trinh, Q. H. Multi-objective Optimization of the Flat Burnishing Process for Energy Efficiency and Surface Characteristics. Mater. Manuf. Process. 2019, 34(16), 1888–1901. DOI: https://doi.org/10.1080/10426914.2019.1689266.
- Myers, R. H.; Montgomery, D. C.; Anderson-Cook, C. M. Response Surface Methodology: Process and Product Optimization Using Designes Experiments; Wiley, 2016.
- Miriyla, S. S.; Mitra, K. Multi-objective Optimization of Iron Ore Induration Process Using Optimal Neutral Networks. Mater. Manuf. Process. 2020, 35(5), 537–544. DOI: https://doi.org/10.1080/10426914.2019.1643476.
- Mogilicharla, A.; Mittal, P.; Majumbar, S.; Mitra, K. Kriging Surrogate Based Multi-objective Optimization of Bulk Vinyl Acetate Polymerization with Branching. Mater. Manuf. Process. 2015, 30(4), 394–402. DOI: https://doi.org/10.1080/10426914.2014.921709.
- Miriyala, S. S.; Mittal, P.; Majumdar, S.; Mitra, K. Comparative Study of Surrogate Approaches while Optimizing Computationally Expensive Reaction Networks. Chem. Eng. Sci. 2016, 140, 44–61. DOI: https://doi.org/10.1016/j.ces.2015.09.030.
- Pantula, P. D.; Miriyala, S. S.; Kernel:, M. K. Enabler to Build Smart Surrogates for Online Optimization and Knowledge Discovery. Mater. Manuf. Process. 2017, 32(10), 1162–1171. DOI: https://doi.org/10.1080/10426914.2016.1269918.
- Dong, W. P.; Sullivan, P. J.; Stout, K. J. Comprehensive Study of Parameters for Characterizing Three-dimensional Surface Topography – III: Parameters for Characterizing Amplitude and Some Functional Properties. Wear. 1994, 178(1–2), 29–43. DOI: https://doi.org/10.1016/0043-1648(94)90127-9.
- ASME B46.1-2009, Surface Texture (Sur75ce Roughness, Waviness, and Lay), an American National Standard, 2009.
- Stoyanov, S. K.;. Optimization of Technological Objects, Technika, Sofia; in Bulgarian, 1993.
- Vuchkov, I. N.; Vuchkov, I. I. QStatLab Professional, V. 5.5 – Statistical Quality Control Software; User’s Manuel, Technika, Sofia, 2009.
- Deb, K.; Pratap, A.; Agarwal, S.; Meyarivan, T. A Fast and Elitist Multiobjective Genetic Algorithm: NSGA-II. IEEE Trans. Evol. Comput. 2002, 6(2), 182–197. DOI: https://doi.org/10.1109/4235.996017.
- Mitra, K.;. Multiobjective Optimization of an Industrial Grinding Operation under Uncertainty. Chem. Eng. Sci. 2009, 64(23), 5043–5056. DOI: https://doi.org/10.1016/j.ces.2009.08.012.
- Mitra, K.; Gopinath, R. Multiobjective Optimization of an Industrial Grinding Operation Using Elitist Nondominated Sorting Genetic Algorithm. Chem. Eng. Sci. 2004, 59(2), 385–396. DOI: https://doi.org/10.1016/j.ces.2003.09.036.
- Mogilicharla, A.; Chugh, T.; Majumdar, S.; Multi-Objective, M. K. Optimization of Bulk Vinyl Acetate Polymerization with Branching. Mater. Manuf. Process. 2014, 29(2), 210–217. DOI: https://doi.org/10.1080/10426914.2013.872271.
- Deb, K.; Mitra, K.; Dewri, R.; Majumdar, S. Towards a Better Understanding of the Epoxy-polymerization Process Using Multi-objective Evolutionary Computation. Chem. Eng. Sci. 2004, 59(20), 4261–4277. DOI: https://doi.org/10.1016/j.ces.2004.06.012.
- Pantula, P. D.; Mitra, K. Towards Efficient Robust Optimization Using Data Based Optimal Segmentation of Uncertain Space. Reliability Engineering and System Safety 2020, 197, 106821. DOI: https://doi.org/10.1016/j.ress.2020.106821.
- Pantula, P. D.; Mitra, K. A Data-driven Approach Towards Finding Closer Estimates of Optimal Solutions under Uncertainty for an Energy Efficient Steel Casting Process. Energy. 2019, 189, 116253. DOI: https://doi.org/10.1016/j.energy.2019.116253.