EDM of titanium foam: electrode wear rate, oversize, and MRR

References

• Banhart, J. Manufacture, Characterisation and Application of Cellular Metals and Metal Foams. Progress in Materials Science. 2001, 46(6), 559–632. DOI: https://doi.org/10.1016/S0079-6425(00)00002-5.
   Web of Science ®Google Scholar
• Moreno, F. G. Commercial Applications of Metal Foams: Their Properties and Production. Materials. 2016, 9(2), 85. DOI: https://doi.org/10.3390/ma9020085.
   Web of Science ®Google Scholar
• Mathan Kumar, P.; Sivakumar, K.; Jayakumar, N. Multiobjective Optimization and Analysis of Copper–titanium Diboride Electrode in EDM of Monel 400™ Alloy. Materials and Manufacturing Processes. 2017, 33(13), 1429–1437. DOI: https://doi.org/10.1080/10426914.2017.1415439.
   Web of Science ®Google Scholar
• Bhaumik, M.; Maity, K. Effect of Different Tool Materials during EDM Performance of Titanium Grade 6 Alloy. Int. J. Eng. Sci. Technol. 2018, 21(3), 507–516.
   Web of Science ®Google Scholar
• Kumar, S.; Batish, A.; Singh, R.; Singh, T. P.; et al. Machining Performance of Cryogenically Treated Ti–5Al–2.5Sn Titanium Alloy in Electric Discharge Machining: A Comparative Study. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2017, 231(11), 2017–2024.
   Web of Science ®Google Scholar
• Kumar, S.; Batish, A.; Singh, R.; Bhattacharya, A.; et al. Effect of Cryogenically Treated Copper-tungsten Electrode on Tool Wear Rate during Electro-discharge Machining of Ti-5Al-2.5Sn Alloy. Wear. 2017, 386-387, 223–229. DOI: https://doi.org/10.1016/j.wear.2017.01.067.
   Web of Science ®Google Scholar
• Rahul, M. D. K.; Datta, S.; Datta, S.; Masanta, M.; et al. Effects of Tool Electrode on EDM Performance of Ti-6Al-4V. Silicon. 2018, 10(5), 2263–2277.
   Web of Science ®Google Scholar
• Sahu, A. K.; Thomas, J.; Mahapatra, S. S. An Intelligent Approach to Optimize the Electrical Discharge Machining of Titanium Alloy by Simple Optimization Algorithm. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2020, 235(2), 371–383. DOI: https://doi.org/10.1177/0954408920964685.
   Web of Science ®Google Scholar
• Sahu, A. K.; Mahapatra, S. S. Performance Analysis of Tool Electrode Prepared through Laser Sintering Process during Electrical Discharge Machining of Titanium. The International Journal of Advanced Manufacturing Technology. 2020, 106(3–4), 1017–1041. DOI: https://doi.org/10.1007/s00170-019-04675-1.
   Web of Science ®Google Scholar
• Holsten, M.; Koshy, P.; Klink, A.; Schwedt, A.; et al. Anomalous Influence of Polarity in Sink EDM of Titanium Alloys. CIRP Ann. Manuf. Technol. 2018, 67(1), 221–224.
   Web of Science ®Google Scholar
• Mathai, V. J.; Dave, H. K.; Desai, K. P. Characterisation and Modelling of Tool Electrode Wear during Planetary EDM of Titanium Grade 5 Alloy. International Journal of Manufacturing Technology and Management. 2020, 34(5), 445–466. DOI: https://doi.org/10.1504/IJMTM.2020.109365.
   Google Scholar
• Kumar, S.; Ghoshal, S. K.; Arora, P. K.; Nagdeve, L.; et al. Multi-variable Optimization in Die-sinking EDM Process of AISI420 Stainless Steel. Materials and Manufacturing Processes. 2021, 36(5), 572–582.
   Web of Science ®Google Scholar
• Das, S.; Paul, S.; Doloi, B. Assessment of the Impacts of Bio-dielectrics on the Textural Features and Recast-layers of EDM-surfaces. Materials and Manufacturing Processes. 2021, 36(2), 245–255. DOI: https://doi.org/10.1080/10426914.2020.1832678.
   Web of Science ®Google Scholar
• Ahmed, N.; Anwar, S.; Ishfaq, K.; Rafaqat, M.; Saleh, M.; Ahmad, S.; et al. The Potentiality of Sinking EDM for Micro-impressions on Ti-6Al-4V: Keeping the Geometrical Errors (Axial and Radial) and Other Machining Measures (Tool Erosion and Work Roughness) at Minimum. Scientific Reports. 2019, 9(1), 17218.
   PubMedGoogle Scholar
• Tanjilul, M.; Keong, D. N. W.; Senthil, K. A. Super Dielectric Based EDM Process for Drilling of Inconel 718. Materials and Manufacturing Processes. 2021, 36(3), 341–350. DOI: https://doi.org/10.1080/10426914.2020.1832682.
   Web of Science ®Google Scholar
• Zainal, N.; Zain, A. M.; Sharif, S.; Abdul Hamed, H. N.; et al. A Study of Dimensional Accuracy on Die Sinking Electrical Discharge Machining of Ti-6AL-4V. Indian Journal of Science and Technology. 2017, 10(12), 1–6.
   Google Scholar
• Omer, E.; Kursad, G. The Effect of Magnesium Content on Drilling of Al-Mg-Ti Alloy by Hole Electrical Discharge Machining Process. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2021, 235(1–2), 125–133. DOI: https://doi.org/10.1177/0954405420949211.
   Web of Science ®Google Scholar
• Obratanski, P. K.; Papazoglou, E. L.; Madej, B. L.; Zagórski, K.; Markopoulos, A. P.; et al. A Comprehensive Study on Processing Ti–6Al–4V ELI with High Power EDM. Materials. 2021, 14(2), 303.
   Web of Science ®Google Scholar
• Papazoglou, E. L.; Obratanski, P. K.; Madej, B. L.; Markopoulos, A. P. et al. A Study on Electrical Discharge Machining of Titanium Grade 2 with Experimental and Theoretical Analysis. Scientific Reports. 2021, 11(1), 8971.
   PubMed Web of Science ®Google Scholar
• Hsu, W. H.; Chien, W. T. Effect of Electrical Discharge Machining on Stress Concentration in Titanium Alloy Holes. Materials. 2016, 9(12), 957. DOI: https://doi.org/10.3390/ma9120957.
   PubMed Web of Science ®Google Scholar
• Krishnakant, D.; Akshay, D. Influence of Glycerin-air Dielectric Medium on Near-dry EDM of Titanium Alloy. Int J Addit Substractive Mater Manuf. 2017, 1(3/4), 328–337.
   Google Scholar
• Sahu, S. N.; Nayak, N. C. Multi-objective Optimisation of EDM Process Using ANN Integrated with NSGA-II Algorithm. International Journal of Manufacturing Technology and Management. 2018, 32(4/5), 381–395. DOI: https://doi.org/10.1504/IJMTM.2018.093356.
   Google Scholar
• Li, M.; Cai, L.; Zhao, J. Research on Discharge Characteristics of Working Mediums of Electric Discharge Machining. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2021, 235(1–2), 34–40. DOI: https://doi.org/10.1177/0954405420951093.
   Web of Science ®Google Scholar
• Ramulu, M.; Spaulding, M. Drilling of Hybrid Titanium Composite Laminate (HTCL) with Electrical Discharge Machining. Materials. 2016, 9(9), 746. DOI: https://doi.org/10.3390/ma9090746.
   Web of Science ®Google Scholar
• Gupta, V.; Singh, B.; Mishra, R. K. Machining of Titanium and Titanium Alloys by Electric Discharge Machining Process: A Review. Int. J. Mach. Mach .Mater. 2020, 22(2), 99–121.
   Google Scholar
• Straka, L.; Hasova, S. Optimization of Material Removal Rate and Tool Wear Rate of Cu Electrode in Die-sinking EDM of Tool Steel. The International Journal of Advanced Manufacturing Technology. 2018, 97(5–8), 2647–2654. DOI: https://doi.org/10.1007/s00170-018-2150-3.
   Web of Science ®Google Scholar
• Avinash, S.; Karthick, C.; Haribaskar, M. Influence of Discharge Energy on Electrical Discharge Machining of Ti-Foam Material. In Advances in Unconventional Machining and Composites. Lecture Notes on Multidisciplinary Industrial Engineering; Shunmugam, M. S., Kanthababu, M., Eds.,  537–547. Springer: Singapore, 2020.
   Google Scholar