References
- Rebelo, J. C.; Dias, A. M.; Kremer, D.; Lebrun, J. L. Influence of EDM Pulse Energy on the Surface Integrity of Martensite Steels. J. Mater. Process. Technol. 1998, 84, 90–96. DOI: https://doi.org/10.1016/S0924-0136(98)00082-X.
- Erden, A. Effect of Materials on the Mechanism of Electric Discharge Machining (E.D.M.). J. Eng. Mater. Technol. 1983, 105(2), 132–138. DOI: https://doi.org/10.1115/1.3225627.
- Ahmed, A. Deposition and Analysis of Composite Coating on Aluminum Using Ti–B4C Powder Metallurgy Tools in EDM. Mater. Manuf. Processes. 2015, 31(4), 467–474. DOI: https://doi.org/10.1080/10426914.2015.1025967.
- Patowari, P. K.; Mishra, U. K.; Saha, P.; Mishra, P. K. Surface Integrity of C-40 Steel Processed with WC-Cu Powder Metallurgy Green Compact Tools in EDM. Mater. Manuf. Processes. 2011, 26(5), 668–676. DOI: https://doi.org/10.1080/10426914.2010.512652.
- Mazarbhuiya, R. M.; Dutta, H.; Debnath, K.; Rahang, M. Surface Modification of CFRP Composite Using reverse-EDM Method. Surf. Int. 2020, 100457. DOI: https://doi.org/10.1016/j.surfin.2020.100457.
- Tyagi, R.; Pandey, K.; Das, A. K.; Mandal, A. Deposition of hBN+ Cu Layer through Electrical Discharge Process Using Green Compact Electrode. Mater. Manuf. Processes. 2019, 34(9), 1035–1048. DOI: https://doi.org/10.1080/10426914.2019.1594259.
- Mazarbhuiya, R. M.; Barua, B. M.; Rahang, M. “Taguchi Grey Relational Multi-response Experimental Optimization on Modification of Al-6061 Surface Using Si–Cu Green Compact Tool in EDM. Surf. Rev. Let. 2021, 28, 2150073. DOI: https://doi.org/10.1142/S0218625X21500736.
- Patowari, P. K.; Saha, P.; Mishra, P. K. An Experimental Investigation of Surface Modification of C-40 Steel Using W–Cu Powder Metallurgy Sintered Compact Tools in EDM. Int. J. Adv. Manuf. Technol. 2015, 80(1–4), 343–360. DOI: https://doi.org/10.1007/s00170-015-7004-7.
- Chen, H. J.; Wu, K. L.; Yan, B. H. Characteristics of Al Alloy Surface after EDC with Sintered Ti Electrode and TiN Powder Additive. Int. J. Adv. Manuf. Technol. 2014, 72(1–4), 319–332. DOI: https://doi.org/10.1007/s00170-014-5669-y.
- Patowari, P. K.; Saha, P.; Mishra, P. K. Artificial Neural Network Model in Surface Modification by EDM Using Tungsten–copper Powder Metallurgy Sintered Electrodes. Int. J. Adv. Manuf. Technol. 2010, 51(5–8), 627–638. DOI: https://doi.org/10.1007/s00170-010-2653-z.
- Luzia, C. A. O.; Laurindo, C. A. H.; Soares, P. C.; Torres, R. D.; Mendes, L. A.; Amorim, F. L. Recast Layer Mechanical Properties of Tool Steel after Electrical Discharge Machining with Silicon Powder in the Dielectric. Int. J. Adv. Manuf. Technol. 2019, 103(1–4), 15–28. DOI: https://doi.org/10.1007/s00170-019-03549-w.
- Bui, V. D.; Mwangi, J. W.; Schubert, A. Powder Mixed Electrical Discharge Machining for Antibacterial Coating on Titanium Implant Surfaces. J. Manuf. Processes. 2019, 44, 261–270. DOI: https://doi.org/10.1016/j.jmapro.2019.05.032.
- Sahu, D. R.; Mandal, A. Critical Analysis of Surface Integrity Parameters and Dimensional Accuracy in Powder-mixed EDM. Mater. Manuf. Processes. 2020, 35(4), 430–441. DOI: https://doi.org/10.1080/10426914.2020.1718695.
- Mohanty, S.; Kumar, V.; Das, A. K.; Dixit, A. R. Surface Modification of Ti-alloy by Micro-electrical Discharge Process Using Tungsten Disulphide Powder Suspension. J. Manuf. Processes. 2019, 37, 28–41. DOI: https://doi.org/10.1016/j.jmapro.2018.11.007.
- Rahang, M.; Patowari, P. K. Parametric Optimization for Selective Surface Modification in EDM Using Taguchi Analysis. Mater. Manuf. Processes. 2016, 31(4), 422–431. DOI: https://doi.org/10.1080/10426914.2015.1037921.
- Rahang, M.; Patowari, P. K. Application of Masking Technique in EDM for Generation of Rectangular Shaped Pattern. Int. J. Precis. Technol. 2015, 5(2), 140–156. DOI:https://doi.org/10.1504/IJPTECH.2015.070639.
- Rahang, M.; Patowari, P. K. Pattern Generation by Selective Area Deposition of Material in EDM. Mater. Manuf. Processes. 2019, 34(16), 1847–1854. DOI: https://doi.org/10.1080/10426914.2019.1669798.
- Rahang, M.; Patowari, P. K. Selective Area Deposition for Pattern Generation in EDM Using Masking Technique. Surf. Rev. Let. 2020, 27(10), 1950218. DOI: https://doi.org/10.1142/S0218625X19502184.
- Das, A.; Misra, J. P. Experimental Investigation on Surface Modification of Aluminum by Electric Discharge Coating Process Using TiC/Cu Green Compact Tool-electrode. Machin. Sci. Technol. 2012, 16(4), 601–623. DOI: https://doi.org/10.1080/10910344.2012.731951.
- Mazarbhuiya, R. M.; Rahang, M. Reverse EDM Process for Pattern Generation Using Powder Metallurgical Green Compact Tool. Mater. Manuf. Processes. 2020, 35(15), 1741–1748. DOI: https://doi.org/10.1080/10426914.2020.1802036.
- Mogilicharla, A.; Mittal, P.; Majumdar, S.; Mitra, K. Kriging Surrogate Based Multi-objective Optimization of Bulk Vinyl Acetate Polymerization with Branching. Mater. Manuf. Processes. 2015, 30(4), 394–402. DOI: https://doi.org/10.1080/10426914.2014.921709.
- Pantula, P. D.; Miriyala, S. S.; Mitra, K. KERNEL: Enabler to Build Smart Surrogates for Online Optimization and Knowledge Discovery. Mater. Manuf. Processes. 2017, 32(10), 1162–1171. DOI: https://doi.org/10.1080/10426914.2016.1269918.
- Miriyala, S. S.; Subramanian, V. R.; Mitra, K. TRANSFORM-ANN for Online Optimization of Complex Industrial Processes: Casting Process as Case Study. Eur. J. Of Oper. Res. 2018, 264(1), 294–309. DOI: https://doi.org/10.1016/j.ejor.2017.05.026.
- Miriyala, S. S.; Mittal, P.; Majumdar, S.; Mitra, K. Comparative Study of Surrogate Approaches while Optimizing Computationally Expensive Reaction Networks. Chem Eng. Sci. 2016, 140, 44–61. DOI: https://doi.org/10.1016/j.ces.2015.09.030.
- Miriyala, S. S.; Mitra, K. Multi-objective Optimization of Iron Ore Induration Process Using Optimal Neural Networks. Mater. Manuf. Processes. 2020, 35(5), 537–544. DOI: https://doi.org/10.1080/10426914.2019.1643476.
- Pantula, P. D.; Mitra, K. A Data-driven Approach Towards Finding Closer Estimates of Optimal Solutions under Uncertainty for an Energy Efficient Steel Casting Process. Energy. 2019, 189, 116253. DOI: https://doi.org/10.1016/j.energy.2019.116253.
- Pantula, P. D.; Mitra, K. Towards Efficient Robust Optimization Using Data Based Optimal Segmentation of Uncertain Space. Reliab. Eng. Syst. Saf. 2020, 197, 106821. DOI: https://doi.org/10.1016/j.ress.2020.106821.
- Gill, A. S.; Kumar, S. Surface Roughness and Microhardness Evaluation for EDM with Cu-Mn Powder Metallurgy Tool. Mater. Manuf. Processes. 2016, 31(4), 514–521. DOI: https://doi.org/10.1080/10426914.2015.1070412.
- Mandal, P.; Mondal, S. C. Investigation of Electrothermal Property of Cu-MWCNT-coated 316L Stainless Steel. Surf. Eng. 2018, 34(9), 697–704. DOI: https://doi.org/10.1080/02670844.2017.1395981.