References
- Elhami, S.; Razfar, M.; Farahnakian, M.; Rasti, A. Application of GONNS to Predict Constrained Optimum Surface Roughness in Face Milling of High-silicon Austenitic Stainless Steel. Int. J. Adv. Manuf. Technol. 2013, 66(5–8), 975–986. DOI: https://doi.org/10.1007/s00170-012-4382-y.
- Leo Kumar, S.; Avinash, D. Investigations on Achievable Surface Quality in Milling of Ti-35Nb-7Zr-5Ta Alloy. Mater. Manuf. Processes 2021, 36, 1800–1806. Published Online Jul 05. DOI: https://doi.org/10.1080/10426914.2021.1948054.
- Selvakumar, S.; Sreebalaji, V.; Ravikumar, K. Machinability Analysis and Optimization in Micro Turning on Tool Wear for Titanium Alloy. Mater. Manuf. Processes. 2021, 36(7), 792–802. DOI: https://doi.org/10.1080/10426914.2020.1866198.
- Elhami, S.; Razfar, M.; Farahnakian, M. Experimental Study of Surface Roughness and Tool Flank Wear during Hybrid Milling. Mater. Manuf. Processes. 2016, 31(7), 933–940. DOI: https://doi.org/10.1080/10426914.2015.1048474.
- Pervaiz, S.; Rashid, A.; Deiab, I.; Nicolescu, M. Influence of Tool Materials on Machinability of Titanium-and Nickel-based Alloys: A Review. Mater. Manuf. Processes. 2014, 29(3), 219–252. DOI: https://doi.org/10.1080/10426914.2014.880460.
- Xu, J.; Zhou, L.; Chen, M.; Ren, F. Experimental Study on Mechanical Drilling of Carbon/epoxy composite-Ti6Al4V Stacks. Mater. Manuf. Processes. 2019, 34(7), 715–725. DOI: https://doi.org/10.1080/10426914.2019.1594275.
- Vyas, A.; Shaw, M. Mechanics of Saw-tooth Chip Formation in Metal Cutting. J. Manuf. Sci. Eng. 1999, 121(2), 163–172. DOI: https://doi.org/10.1115/1.2831200.
- Mahesh, K.; Philip, J. T.; Joshi, S.; Kuriachen, B. Machinability of Inconel 718: A Critical Review on the Impact of Cutting Temperatures. Mater. Manuf. Processes. 2021, 36(7), 753–791. DOI: https://doi.org/10.1080/10426914.2020.1843671.
- Jaiswal, A. P.; Khanna, N.; Bajpai, V. Orthogonal Machining of Heat Treated Ti-10-2-3: FE and Experimental. Mater. Manuf. Processes. 2020, 35(16), 1822–1831. DOI: https://doi.org/10.1080/10426914.2020.1802039.
- Ming, W.; Dang, J.; An, Q.; Chen, M. Chip Formation and Hole Quality in Dry Drilling Additive Manufactured Ti6Al4V. Mater. Manuf. Processes. 2020, 35(1), 43–51. DOI: https://doi.org/10.1080/10426914.2019.1692353.
- Gowthaman, S.; Jagadeesha, T. Experimental Investigation on Friction Formation during Slot Milling of Nimonic263. Mater. Manuf. Processes. 2021, 36(12), 1403–1413. DOI: https://doi.org/10.1080/10426914.2021.1906899.
- Khajehzadeh, M.; Moradpour, J.; Razfar, M. R. Influence of Nanofluids Application on Contact Length during Hard Turning. Mater. Manuf. Processes. 2019, 34(1), 30–38. DOI: https://doi.org/10.1080/10426914.2018.1532091.
- Khajehzadeh, M.; Moradpour, J.; Razfar, M. R. Influence of Nanolubricant Particles’ Size on Flank Wear in Hard Turning. Mater. Manuf. Processes. 2019, 34(5), 494–501. DOI: https://doi.org/10.1080/10426914.2019.1566619.
- Wang, X.; Jawahir, I. Prediction of Tool-chip Interface Friction and Chip-groove Effects in Machining with Restricted Contact Grooved Tools Using the Universal Slip-line Model. Key Eng. Mater. 2003, 233–236, 469–476. Trans Tech Publ. https://doi.org/https://doi.org/10.4028/www.scientific.net/KEM.233-236.469.
- Mikołajczyk, T.; Latos, H.; Pimenov, D. Y.; Paczkowski, T.; Gupta, M. K.; Krolczyk, G. Influence of the Main Cutting Edge Angle Value on Minimum Uncut Chip Thickness during Turning of C45 Steel. J. Manuf. Processes. 2020, 57, 354–362. DOI: https://doi.org/10.1016/j.jmapro.2020.06.040.
- Elias, J. V.; Venkatesh, N. P.; Lawrence, K. D.; Mathew, J. Tool Texturing for Micro-turning Applications–an Approach Using Mechanical Micro Indentation. Mater. Manuf. Processes. 2021, 36(1), 84–93. DOI: https://doi.org/10.1080/10426914.2020.1813899.
- Sivaiah, P.; Revantha Kumar, M.; Bala Subramanyam, S.; Prasad, K. A Comparative Study on Different Textured and Untextured Tools Performance in Turning Process. Mater. Manuf. Processes. 2021, 36(8), 926–935. DOI: https://doi.org/10.1080/10426914.2020.1866201.
- Jesudass Thomas, S.; Kalaichelvan, K. Comparative Study of the Effect of Surface Texturing on Cutting Tool in Dry Cutting. Mater. Manuf. Processes. 2018, 33(6), 683–694. DOI: https://doi.org/10.1080/10426914.2017.1376070.
- Bajpai, V.; Lee, I.; Park, H. W. Finite Element Modeling of Three-dimensional Milling Process of Ti–6Al–4V. Mater. Manuf. Processes. 2014, 29(5), 564–571. DOI: https://doi.org/10.1080/10426914.2014.892618.
- Hussain, M.; Siemers, C.; Rösler, J. Development of a Free-machining (α+ β) Titanium Alloy Based on Ti-6Al-2Sn-4Zr-6Mo. Mater. Manuf. Processes. 2013, 28(5), 545–549. DOI: https://doi.org/10.1080/10426914.2012.746781.
- Sivaiah, P.; Singh, M. M.; Venkatesu, S.; Yoganjaneyulu, G. Investigation on Turning Process Performance Using Hybrid-textured Tools under Dry and Conventional Cooling Environment. Mater. Manuf. Processes. 2020, 35(16), 1852–1859. DOI: https://doi.org/10.1080/10426914.2020.1813893.
- Sivaiah, P.; Guru Prasad, M.; Singh, M. M.; Uma, B. Machinability Evaluation during Machining of AISI 52100 Steel with Textured Tools under Minimum Quantity Lubrication–A Comparative Study. Mater. Manuf. Processes. 2020, 35(15), 1761–1768. DOI: https://doi.org/10.1080/10426914.2020.1802034.
- Khani, S.; Razfar, M. R.; Haghighi, S. S.; Farahnakian, M. Optimization of Microtextured Tools Parameters in Thread Turning Process of Aluminum 7075 Aerospace Alloy. Mater. Manuf. Processes. 2020, 35(12), 1330–1338. DOI: https://doi.org/10.1080/10426914.2020.1772485.
- Khani, S.; Haghighi, S. S.; Razfar, M. R.; Farahnakian, M. Optimization of Dimensional Accuracy in Threading Process Using Solid-lubricant Embedded Textured Tools. Mater. Manuf. Processes 2021, 1–11, Published Online May 14. DOI: https://doi.org/10.1080/10426914.2021.1926492.
- Khani, S.; Shahabi Haghighi, S.; Razfar, M. R.; Farahnakian, M. Improvement of Thread Turning Process Using Micro-hole Textured Solid-lubricant Embedded Tools. Proc. Inst. Mech. Eng. Part B. 2021, 235(11), 1727–1738. DOI: https://doi.org/10.1177/09544054211019929.
- He, L.; Su, H.; Xu, J.; Zhang, L. Study on Dynamic Chip Formation Mechanisms of Ti2AlNb Intermetallic Alloy. Int. J. Adv. Manuf. Technol. 2017, 92(9), 4415–4428. DOI: https://doi.org/10.1007/s00170-017-0527-3.
- Burns, T. J.; Davies, M. A. Nonlinear Dynamics Model for Chip Segmentation in Machining. Phys. Rev. Lett. 1997, 79(3), 447. DOI: https://doi.org/10.1103/physrevlett.79.447.