References
- Mishra, D. K.; Verma, A. K.; Arab, J.; Marla, D.; Dixit, P. Numerical and experimental investigations into microchannel formation in glass substrate using electrochemical discharge machining. Journal of Micromechanics and Microengineering. 2019, 29(7), 75004. DOI: 10.1088/1361-6439/ab1da7.
- Sharma, P.;, Arab, J.;, and Dixit, P. Through-Holes Micromachining of Alumina Using a Combined Pulse-Feed Approach in ECDM. Materials and Manufacturing Processes 2021, 36 , 1501–1512.
- Kolhekar, K.; Sundaram, M. A Multiphase Simulation Study of Electrochemical Discharge Machining of Glass. International Journal of Advanced Manufacturing Technology 2019, 105(1), 1597–1608. DOI: 10.1007/s00170-019-04318-5.
- Singh, T.;, and Dvivedi, A. Impact of gas film thickness on the performance of RM-ECDM process during machining of glass. Materials and Manufacturing Processes 2021, 1–12. DOI: 10.1080/10426914.2021.1945092.
- Arab, J.;, and Dixit, P. Influence of tool electrode feed rate in the electrochemical discharge drilling of a glass substrate. Materials and Manufacturing Processes 2020, 35 , 1749–1760.
- Mishra, D. K.; Pawar, K.; Dixit, P. Effect of tool electrode-workpiece gap in the microchannel formation by electrochemical discharge machining. ECS Journal of Solid State Science and Technology. 2020, 9(3), 34011. DOI: 10.1149/2162-8777/ab80b1.
- Appalanaidu, B.; Dvivedi, A. On controlling of gas film shape in electrochemical discharge machining process for fabrication of elliptical holes. Materials and Manufacturing Processes 2021, 36(5), 558–571. DOI: 10.1080/10426914.2020.1854464.
- Mishra, D. K.; Arab, J.; Magar, Y.; Dixit, P. High aspect ratio glass micromachining by multi-pass electrochemical discharge based micromilling technique. ECS Journal of Solid State Science and Technology. 2019, 8(6), P322–P331. DOI: 10.1149/2.0191906jss.
- Verma, A. K.; Mishra, D. K.; Pawar, K.; Dixit, P. Investigations into surface topography of glass microfeatures formed by pulsed electrochemical discharge milling for microsystem applications. Microsystem Technologies 2020, 26, 2105–2116. DOI: 10.1007/s00542-020-04770-4.
- Rathore, R. S.; Dvivedi, A. Sonication of tool electrode for utilizing high discharge energy during ECDM. Materials and Manufacturing Processes 2020, 35(4), 415–429. DOI: 10.1080/10426914.2020.1718699.
- Arab, J.;, Pawar, K.;, and Dixit, P. Effect of tool-electrode material in through-hole formation using ECDM process. Materials and Manufacturing Processes 2021, 36 , 1019–1027.
- Kumar, N.; Mandal, N.; Das, A. K. Micro-machining through electrochemical discharge processes: a review. Materials and Manufacturing Processes 2020, 35(4), 363–404. DOI: 10.1080/10426914.2020.1711922.
- Elhami, S.; Razfar, M. R. Effect of ultrasonic vibration on the single discharge of electrochemical discharge machining. Materials and Manufacturing Processes 2018, 33(4), 444–451. DOI: 10.1080/10426914.2017.1328113.
- Cheng, C.-P.; Wu, K.-L.; Mai, -C.-C.; Hsu, Y.-S.; Yan, B.-H. Magnetic Field-assisted electrochemical discharge machining. Journal of Micromechanics and Microengineering. 2010, 20(7), 75019. DOI: 10.1088/0960-1317/20/7/075019.
- Saranya, S.; Sankar, A. R. Fabrication of precise microchannels using a side-insulated tool in a spark assisted chemical engraving process. Materials and Manufacturing Processes 2018, 33(13), 1422–1428. DOI: 10.1080/10426914.2017.1401728.
- Arab, J.; Mishra, D. K.; Kannojia, H. K.; Adhale, P.; Dixit, P. Fabrication of multiple through-holes in nonconductive materials by electrochemical discharge machining for RF MEMS packaging. Journal of Materials Processing Technology 2019, 271, 542–553. DOI: 10.1016/j.jmatprotec.2019.04.032.
- Kannojia, H. K.; Arab, J.; Pegu, B. J.; Dixit, P. Fabrication and characterization of through-glass vias by the ECDM process. Journal of the Electrochemical Society 2019, 166(13), D531–D538. DOI: 10.1149/2.0141913jes.
- Arab, J.; Mishra, D. K.; Dixit, P. Measurement and analysis of the geometric characteristics of microholes and tool wear for varying tool-workpiece gaps in electrochemical discharge drilling. Measurement. 2021, 168, 108463. DOI: 10.1016/j.measurement.2020.108463.
- Mishra, K.; Sarkar, B. R.; Bhattacharyya, B. Influence of inner-spraying rotating tool during electrochemical milling of Nimonic-263 Alloy. Materials and Manufacturing Processes 2019, 34(7), 807–813. DOI: 10.1080/10426914.2019.1594277.
- Kunar, S.; Bhattacharyya, B. Electrochemical micromachining of micro square pattern using reusable masked tool. Materials and Manufacturing Processes 2019, 34(5), 487–493. DOI: 10.1080/10426914.2018.1532582.
- Rahman, Z.; Das, A. K.; Chattopadhyaya, S. Microhole drilling through electrochemical processes: a review. Materials and Manufacturing Processes 2018, 33(13), 1379–1405. DOI: 10.1080/10426914.2017.1401721.
- Tsui, H.-P.; Hung, J.-C.; You, J.-C.; Yan, B.-H. Improvement of electrochemical microdrilling accuracy using helical tool. Materials and Manufacturing Processes 2008, 23(5), 499–505. DOI: 10.1080/10426910802104237.
- Singh, A.; Anandita, S.; Gangopadhyay, S. Microstructural analysis and multiresponse optimization during ECM of Inconel 825 using hybrid approach. Materials and Manufacturing Processes. 2015, 30(7), 842–851. DOI: 10.1080/10426914.2014.973575.
- Qian, S.; Ji, F.; Qu, N.; Li, H. Improving the localization of surface texture by electrochemical machining with auxiliary anode. Materials and Manufacturing Processes 2014, 29(11–12), 1488–1493. DOI: 10.1080/10426914.2014.930950.
- Malapati, M.; Bhattacharyya, B. Investigation into electrochemical micromachining process during micro-channel generation. Materials and Manufacturing Processes 2011, 26(8), 1019–1027. DOI: 10.1080/10426914.2010.525575.
- Patro, S. K.; Mishra, D. K.; Arab, J.; Dixit, P. Numerical and experimental analysis of high-aspect-ratio micro-tool electrode fabrication using controlled electrochemical machining. Journal of Applied Electrochemistry 2020, 50(2), 169–184. DOI: 10.1007/s10800-019-01380-5.
- Kumar, A.;, and Das, M. Multiphysics simulation and experimental investigation of microtool fabricated by EMM. Materials and Manufacturing Processes 2021, 36, 1489–1500.
- Lim, Y.-M.; Kim, S. H. An electrochemical fabrication method for extremely thin cylindrical micropin. International Journal of Machine Tools and Manufacture 2001, 41(15), 2287–2296. DOI: 10.1016/S0890-6955(00)00129-2.
- Fan, Z.-W.; Hourng, L.-W. The analysis and investigation on the microelectrode fabrication by electrochemical machining. International Journal of Machine Tools and Manufacture 2009, 49(7–8), 659–666. DOI: 10.1016/j.ijmachtools.2009.01.011.
- Rathod, V.; Doloi, B.; Bhattacharyya, B. Sidewall Insulation of Microtool for Electrochemical Micromachining to Enhance the Machining Accuracy. Materials and Manufacturing Processes 2014, 29(3), 305–313. DOI: 10.1080/10426914.2013.864407.