References
- Watkings. 2005. Automotive Systems.
- Zade, R. Optimization of Inlet Valve of IC Engine Using FEA. Int. Res. J. Eng. Technol. 2016, 3(10), 20.
- Kumar, M.; Das, M. Improvement in Surface Characteristics of SS316L Tiny Gear Profiles by Magnetorheological-Polishing Fluid Using Flow Restrictor. Trans. Indian Inst. Met. 2021, 75(8), 1–15.
- Kumari, C.; Chak, S. K. Experimental Studies on Material Removal Behavior in MRAH Based Finishing Technique. Mater. Manuf. Process. 2021, 36(8), 916–925. DOI: https://doi.org/10.1080/10426914.2021.1885699.
- Shorey, A. B.; Jacobs, S. D.; Kordonski, W. I.; Gans, R. F. Experiments and Observations regarding the Mechanisms of Glass Removal in Magnetorheological Finishing. Appl. Opt. 2001, 40(1), 20. DOI: https://doi.org/10.1364/ao.40.000020.
- Schinhaerl, M.; Vogt, C.; Geiss, A.; Stamp, R.; Sperber, P.; Smith, L.; Smith, G.; Rascher, R. Forces Acting between Polishing Tool and Workpiece Surface in Magnetorheological Finishing. Curr. Dev. Lens Des. Opt. Eng. IX 2008, 7060(August), 706006. DOI: https://doi.org/10.1117/12.794196.
- Arora, K.; Singh, A. K. Magnetorheological Finishing of UHMWPE Acetabular Cup Surface and Its Performance Analysis. Mater. Manuf. Process. 2020, 35(14), 1631–1649. DOI: https://doi.org/10.1080/10426914.2020.1784928.
- DeGroote, J. E.; Marino, A. E.; Wilson, J. P.; Bishop, A. L.; Lambropoulos, J. C.; Jacobs, S. D. Removal Rate Model for Magnetorheological Finishing of Glass. Appl. Opt. 2007, 46(32), 7927–7941. DOI: https://doi.org/10.1364/AO.46.007927.
- Sidpara, A.; Jain, V. K. Analysis of Forces on the Freeform Surface in Magnetorheological Fluid Based Finishing Process. Int. J. Mach. Tools Manuf. 2013, 69, 1–10. DOI: https://doi.org/10.1016/j.ijmachtools.2013.02.004.
- Sidpara, A.; Jain, V. K. Theoretical Analysis of Forces in Magnetorheological Fluid Based Finishing Process. Int. J. Mech. Sci. 2012, 56(1), 50–59. DOI: https://doi.org/10.1016/j.ijmecsci.2012.01.001.
- Kumari, C.; Chak, S. K.; Vani, V. V. Experimental Investigations and Optimization of Machining Parameters for Magneto-Rheological Abrasive Honing Process. Mater. Manuf. Process. 2020, 35(14), 1622–1630. DOI: https://doi.org/10.1080/10426914.2020.1779938.
- Lei, J.; Tao, J.; Liu, C.; Wu, Y. Flow Model and Dynamic Characteristics of a Direct Spring Loaded Poppet Relief Valve. Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci. 2018, 232(9), 1657–1664. DOI: https://doi.org/10.1177/0954406217707546.
- Khan, M. I.; Khan, M. A.; Shakoor, A. A Failure Analysis of the Exhaust Valve from A Heavy Duty Natural Gas Engine. Eng. Fail. Anal. 2017, 85(16), 77–88. DOI: https://doi.org/10.1016/j.engfailanal.2017.12.001.
- Mitianiec, W. Modern Pneumatic and Combustion Hybrid Engines. Improv. Trends Intern. Combust. Engines 2018, 16(333), 15–16. DOI: https://doi.org/10.5772/intechopen.69689.
- Divya, S.; Pavithran, R.; Vijay, S. Engine Valve Lapping. Int. J. Res. Eng. Sci. Manag. 2019, 2(5), 2581–5792.
- Forsberg, P.; Hollman, P.; Jacobson, S. Wear Mechanism Study of Exhaust Valve System in Modern Heavy Duty Combustion Engines. Wear. 2011, 271(9–10), 2477–2484. DOI: https://doi.org/10.1016/j.wear.2010.11.039.
- Abeysekara, A.; Ag, C.; Abeysekara, A. Valve Lapping Machine for Internal Combustion Engines. Univ. Wolverhampt. Abstr. 2015, 21(12), 0–57.
- Singh, H.; Jain, P. K. A Comparative Study of Precision Finishing of Rebuild Engine Valve Faces Using Micro-Grinding and ECH. J. Remanufacturing 2015, 5(1), 20. DOI: https://doi.org/10.1186/s13243-015-0016-5.
- Fulmali, S. M.; Chadge, R. B. Need of Lapping Machine for Valve Component: A Case Study. Int. J. Mod. Eng. Res. 2012, 2(6), 4609–4612. www.ijmer.com.
- Sterling, J. G.; Heights, C.; Ohio. Process for Removal of Annular Scratches in Hollow Poppet Valve Stems. US525274, 1944.
- Barman, A.; Das, M. Nano-Finishing of Bio-Titanium Alloy to Generate Different Surface Morphologies by Changing Magnetorheological Polishing Fluid Compositions. Precis. Eng. 2018, 51, 145–152. DOI: https://doi.org/10.1016/j.precisioneng.2017.08.003.
- Jayant; Jain, V. K. Analysis of Finishing Forces and Surface Finish during Magnetorheological Abrasive Flow Finishing of Asymmetric Workpieces. J. Micromanufact. 2019, 2(2), 133–151. DOI: https://doi.org/10.1177/2516598418818260.
- Ginder, J. M.; Davis, L. C.; Elie, L. D. Rheology of Magnetorheology Fluids: Models and Measurements. Int. J. Mod. Phys. 1996, 10(23), 11. DOI: https://doi.org/10.1142/S0217979296001744.
- Emslie, A. G.; Bonner, F. T.; Peck, L. G. Flow of a Viscous Liquid on a Rotating Disk. J. Appl. Phys. 1958, 29(5), 858–862. DOI: https://doi.org/10.1063/1.1723300.
- Lambropoulos, J. C.; Miao, C.; Jacobs, S. D. Magnetic Field Effects on Shear and Normal Stresses in Magnetorheological Finishing. Opt. Express. 2010, 18(19), 19713. DOI: https://doi.org/10.1364/oe.18.019713.
- Kumar, M.; Ahmad, S.; Das, M. Magnetorheological-Finishing of Miniature Gear Teeth Profiles Using Uniform Flow Restrictor. Mater. Manuf. Process. 2021, 36(11), 1–16. DOI: https://doi.org/10.1080/10426914.2021.1954193.
- Huang, J.; Zhang, J. Q.; Liu, J. N. Effect of Magnetic Field on Properties of MR Fluids. Int. J. Mod. Phys. B. 2005, 19(1), 597–601. DOI: https://doi.org/10.1142/S0217979205029122.
- Khan, D. A.; Jha, S. Synthesis of Polishing Fluid and Novel Approach for Nanofinishing of Copper Using Ball-End Magnetorheological Finishing Process. Mater. Manuf. Process. 2018, 33(11), 1150–1159. DOI: https://doi.org/10.1080/10426914.2017.1328112.