References
- Singh, S. R.; Vasavada, J.; Mote, R. G.; Mishra, S. K. To Study the Effect of Microstructures on Machinability of Inconel-718 Superalloy in Micro-drilling Process. J. Manuf. Sci. Eng. 2021, 143(7), 071008. DOI: https://doi.org/10.1115/1.4050176.
- Sutanto, H.; Madl, J. In Residual Stress Development in Hard Machining-a Review. IOP Conference: Materials Science and Engineering. Medan, Indonesia, IOP Publishing: 2018; p 012031.
- Khajehzadeh, M.; Razfar, M. R. Process Parameters Influence on Laser-assisted Machining-induced Residual Stresses. J. Mater.Manuf. Process. 2020, 35(15), 1680–1689. DOI: https://doi.org/10.1080/10426914.2020.1784930.
- Khajehzadeh, M.; Boostanipour, O.; Razfar, M. R. Finite Element Simulation and Experimental Investigation of Residual Stresses in Ultrasonic Assisted Turning. Ultrasonics. 2020, 108, 106208. DOI: https://doi.org/10.1016/j.ultras.2020.106208.
- Alok, A.; Kumar, A.; Das, M. Hard Turning with a New HSN 2-Coated Carbide Insert and Optimization of Process Parameter. Trans. Ind. Inst. Metals.2021, 74 , 1–15.
- Amiril, S.; Rahim, E.; Hishamudin, A. In Effect of Nozzle Distance and Cutting Parameters on MQL Machining of AISI 1045 IOP Publishing. J. Phys. Conf. Ser.2019, 1150, 012045.
- Xu, X.; Huang, S.; Wang, M.; Yao, W. A Study on Process Parameters in End Milling of AISI-304 Stainless Steel under Electrostatic Minimum Quantity Lubrication Conditions. Int. J. Adv. Manuf. Technol. 2017, 90(1–4), 979–989. DOI: https://doi.org/10.1007/s00170-016-9417-3.
- Duc, T. M.; Tuan, N. M. Novel Uses of Al2O3/Mos2 Hybrid Nanofluid in MQCL Hard Milling of Hardox 500 Steel. Lubricants. 2021, 9(4), 45. DOI: https://doi.org/10.3390/lubricants9040045.
- Vasu, V.; Pradeep Kumar Reddy, G. Effect of Minimum Quantity Lubrication with Al2O3 Nanoparticles on Surface Roughness, Tool Wear and Temperature Dissipation in Machining Inconel 600 Alloy. Proc. IMech. E N J. Nanoeng. Nanosyst. 2011, 225(1), 3–16.
- Mukherjee, S.; Mishra, P. C.; Chaudhuri, P. Stability of Heat Transfer Nanofluids–a Review. Chem. Bio. Eng. Rev. 2018, 5(5), 312–333. DOI: https://doi.org/10.1002/cben.201800008.
- Najiha, M. S.; Rahman, M. Experimental Investigation of Flank Wear in End Milling of Aluminum Alloy with Water-based TiO2 Nanofluid Lubricant in Minimum Quantity Lubrication Technique. Int. J. Adv. Manuf. Technol. 2016, 86(9), 2527–2537. DOI: https://doi.org/10.1007/s00170-015-8256-y.
- Khajehzadeh, M.; Moradpour, J.; Razfar, M. R. Influence of Nanofluids Application on Contact Length during Hard Turning. J. Mater. Manuf. Process. 2019, 34(1), 30–38. DOI: https://doi.org/10.1080/10426914.2018.1532091.
- Khajehzadeh, M.; Moradpour, J.; Razfar, M. R. Influence of Nanolubricant Particles’ Size on Flank Wear in Hard Turning. J. Mater.Manuf. Process. 2019, 34(5), 494–501. DOI: https://doi.org/10.1080/10426914.2019.1566619.
- Hegab, H.; Kishawy, H. A. Towards Sustainable Machining of Inconel 718 Using Nano-fluid Minimum Quantity Lubrication. J. Manuf. Mater. Process. 2018, 2(3), 50.
- Hegab, H.; Umer, U.; Soliman, M.; Kishawy, H. A. Effects of Nano-cutting Fluids on Tool Performance and Chip Morphology during Machining Inconel 718. Int. J. Adv. Manuf. Technol. 2018, 96, 3449–3458. DOI: https://doi.org/10.1007/s00170-018-1825-0.
- Hua, Y.; Liu, Z. Experimental Investigation of Principal Residual Stress and Fatigue Performance for Turned Nickel-based Superalloy Inconel 718. Materials. 2018, 11(6), 879. DOI: https://doi.org/10.3390/ma11060879.
- Liu, Y.; Xu, D.; Agmell, M.; M’Saoubi, R.; Ahadi, A.; Stahl, J.-E.; Zhou, J. Numerical and Experimental Investigation of Tool Geometry Effect on Residual Stresses in Orthogonal Machining of Inconel 718. Simulat. Model. Pract. Theor. 2021, 106, 102187. DOI: https://doi.org/10.1016/j.simpat.2020.102187.
- Peng, R.; He, X.; Tong, J.; Tang, X.; Wu, Y. Application of a Tailored Eco-friendly Nanofluid in Pressurized Internal-cooling Grinding of Inconel 718. J. Cleaner Product. 2021, 278, 123498. DOI: https://doi.org/10.1016/j.jclepro.2020.123498.
- Raftar, O. R.; Kaveh, M.; Khajehzadeh, M.; Rahimi, A.; Razfar, M. R. Nano-lubricant Influence on Surface Residual Stresses in Hard Milling. Proc. IMechE E J. Process Mech. Eng. 2021, 09544089211004793.
- Syafiq, A.; Redhwan, A.; Hazim, A.; Aminullah, A.; Ariffin, S. Z.; Nughoro, W.; Arifuddin, A.; Hawa, A. In an Experimental Evaluation of SiO2 Nano Cutting Fluids in CNC Turning of Aluminium Alloy AL319 via MQL Technique. IOP Conference: Materials Science and Engineering. Kemaman, Malaysia, IOP Publishing, 2021; p 012009.