References
- Dhakar, K.; Chaudhary, K.; Dvivedi, A.; Bembalge, O. An Environment-friendly and Sustainable machining Method: Near-dry EDM. Mater. Manuf. Process. 2019, 34(12), 1307–1315. DOI: https://doi.org/10.1080/10426914.2019.1643471.
- Kumar, A.; Maheshwari, S.; Sharma, C.; Beri, N. Research Developments in Additives Mixed Electrical Discharge Machining (AEDM): A State of Art Review. Mater. Manuf. Process. 2010, 25(10), 1166–1180. DOI: https://doi.org/10.1080/10426914.2010.502954.
- Tiwari, T.; Nag, A.; Dixit, A. R. Investigations on Bending of Micro-thin Sheets Using Spark Discharges. Mater. Manuf. Process. 2020, 35(12), 1362–1371. DOI: https://doi.org/10.1080/10426914.2020.1772488.
- Mazarbhuiya, R. M.; Rahang, M. Reverse EDM Process for Pattern Generation Using Powder Metallurgical Green Compact Tool. Mater. Manuf. Process. 2020, 35(15), 1741–1748. DOI: https://doi.org/10.1080/10426914.2020.1802036.
- Li, M.; Yang, Z. J.; Dong, H.; Zhou, Y.; Liu, Y. H. Machining Performance of High Energy Die-sinking Electrical Discharge Machining on GH2132. Mater. Manuf. Process. 2020, 35(9), 1024–1031. DOI: https://doi.org/10.1080/10426914.2020.1758328.
- Singh, R.; Dvivedi, A.; Kumar, P. EDM of High Aspect Ratio Micro-holes on Ti-6Al-4V Alloy by Synchronizing Energy Interactions. Mater. Manuf. Process. 2020, 35(11), 1188–1203. DOI: https://doi.org/10.1080/10426914.2020.1762207.
- Bellotti, M.; Qian, J.; Reynaerts, D. Breakthrough Phenomena in Drilling Micro Holes by EDM. Int. J. Mach. Tool. Manu. 2019, 146. DOI: https://doi.org/10.1016/j.ijmachtools.2019.103436.
- Li, Z. K.; Tang, J. J.; Bai, J. H. A Novel micro-EDM Method to Improve Microhole Machining Performances Using Ultrasonic Circular Vibration (UCV) Electrode. Int. J. Mech. Sci. 2020, 175. DOI: https://doi.org/10.1016/j.ijmecsci.2020.105574.
- Yadav, V. K.; Kumar, P.; Dvivedi, A. Effect of Tool Rotation in Near-dry EDM Process on Machining Characteristics of HSS. Mater. Manuf. Process. 2019, 34(7), 779–790. DOI: https://doi.org/10.1080/10426914.2019.1605171.
- Tanjilul, M.; Wee Keong, D. N.; Senthil Kumar, A. Super Dielectric Based EDM Process for Drilling of Inconel 718. Mater. Manuf. Process. 2020, 36(3), 341–350. DOI: https://doi.org/10.1080/10426914.2020.1832682.
- Unune, D. R.; Nirala, C. K.; Mali, H. S. Accuracy and Quality of Micro-holes in Vibration Assisted Micro-electro-discharge Drilling of Inconel 718. Measurement. 2019, 135, 424–437. DOI: https://doi.org/10.1016/j.measurement.2018.11.067.
- Natsu, W.; Maeda, H. Realization of High-speed Micro EDM for High-aspect-Ratio Micro Hole with Mist Nozzle. Procedia CIRP. 2018, 68, 575–577. DOI: https://doi.org/10.1016/j.procir.2017.12.116.
- Huang, Y. H.; Zhang, Q. H.; Xing, Q. X.; Yao, Z. Y.; Li, J. C. Effects of Electrode Rotational Speed on Processing Performances of AISI 304 in Micro-electrical Discharge Machining. The International Journal of Advanced Manufacturing Technology. 2019, 105(1–4), 1665–1674. DOI: https://doi.org/10.1007/s00170-019-04345-2.
- Mao, X. Y.; Wang, X. Z.; Li, C. J.; Mo, J.; Ding, S. L. Effects of Stepped Cylindrical Electrode in Electrical Discharge Machining of Blind Holes. Int. J. Adv. Manuf. Technol. 2020, 110(5–6), 1457–1469. DOI: https://doi.org/10.1007/s00170-020-05941-3.
- Wang, K.; Zhang, Q. H.; Zhu, G.; Liu, Q. Y.; Huang, Y. H. Experimental Study on Micro Electrical Discharge Machining with Helical Electrode. Int. J. Adv. Manuf. Technol. 2017, 93(5–8), 2639–2645. DOI: https://doi.org/10.1007/s00170-017-0747-6.
- D’urso, G.; Merla, C. Workpiece and Electrode Influence on micro-EDM Drilling Performance. Precision Engineering. 2014, 38(4), 903–914. DOI: https://doi.org/10.1016/j.precisioneng.2014.05.007.
- Liu, J. L.; Wang, K. S.; Chen, X. W. Study on a New Technological Scheme for Cold Press Forging Forming of Step Holes in Thick Sheet Metal. Appl. Mech. Mater. 2011, 109, 187–190. https://www.scientific.net/AMM.109.187.
- Cao, X. J.; Wang, K. S.; Han, Y.; Lin, C. C. Press Forging Forming of Stepped Holes in Thick Sheet Metal. Adv. Mat. Res. 2013, 706–708, 234–237. https://www.scientific.net/AMR.706-708.234.
- Hua, L.; Qian, D. S.; Pan, L. B. Research on Plastic Deformation Behaviour and Conditions for Stepped Hole Ring Rolling. J. Mater. Sci. Technol. 2013, 25(11), 1397–1407. DOI: https://doi.org/10.1179/174328408x363272.
- Wang, K. S.; Liu, J. L.; Chen, X. W. Numerical Simulation of Cold Press Forging Forming for Stepped Hole of Thin Sheet Metal. Appl. Mech. Mater. 2011, 121–126, 249–253. https://www.scientific.net/AMM.121-126.249.
- Das, S.; Doloi, B.; Bhattacharyya, B. Fabrication of Stepped Hole on Zirconia Bioceramics by Ultrasonic Machining. Mach. Sci. Technol. 2016, 20(4), 681–700. DOI: https://doi.org/10.1080/10910344.2016.1224016.
- Sivaraj, M.; Selvakumar, N. Experimental Analysis of Al-TiC Sintered Nanocomposite on EDM Process Parameters Using ANOVA. Mater. Manuf. Process. 2015, 31(6), 802–812. DOI: https://doi.org/10.1080/10426914.2015.1048471.
- Kumar, P. M.; Sivakumar, K.; Jayakumar, N. Multiobjective Optimization and Analysis of Copper-titanium Diboride Electrode in EDM of Monel 400 Alloy. Materials and Manufacturing Processes. 2017, 33(13), 1429–1437. DOI: https://doi.org/10.1080/10426914.2017.1415439.