References
- Sharma, A.; Sharma, V. M.; Gugaliya, A.; Rai, P.; Pal, S. K.; Paul, J. Friction Stir Lap Welding of AA6061 Aluminium Alloy with a Graphene Interlayer. Mater. Manuf. Processes. 2020, 35(3), 258–269. DOI: 10.1080/10426914.2020.1718694.
- Bakkiyaraj, M. Finding the Optimum Concentration of Silicon Carbide and Graphite Particles on the Tensile Strength, Hardness and Wear Properties of Aluminium Matrix Composites by RSM Approach. Surf. Topogr. 2021, 9(25018), 1–12. DOI:10.1088/2051-672X/abfc62.
- Tisza, M.; Czinege, I. Comparative Study of the Application of Steels and Aluminium in Lightweight Production of Automotive Parts. Int. J. Lightweight Mater. Manuf. 2018, 1(4), 229–238. DOI:10.1016/j.ijlmm.2018.09.001.
- Madhavan, S.; Kamaraj, M.; Vijayaraghavan, L. Cold Metal Transfer Welding of Dissimilar A6061 Aluminium Alloy-AZ31B Magnesium Alloy: Effect of Heat Input on Microstructure, Residual Stress and Corrosion Behavior. Trans. Indian Inst. Met. 2017, 70(4), 1047–1054. DOI:10.1007/s12666-016-0893-9.
- Rajeev, G. P.; Kamaraj, M.; Srinivasa, R. B. Effect of Correction Parameters on Deposition Characteristics in Cold Metal Transfer Welding. Mater. Manuf. Processes 2019, 34(11), 1205–1216. DOI: 10.1080/10426914.2019.1628260.
- Liu, Y.; Sun, Q.; Liu, J.; Wang, S.; Feng, J. Effect of Axial External Magnetic Field on Cold Metal Transfer Welds of Aluminium Alloy and Stainless Steel. Mater. Lett. 2015, 152, 29–31. DOI: 10.1016/j.matlet.2015.03.077.
- Selvi, S.; Vishvaksenan, A.; Rajasekar, E. Cold Metal Transfer (CMT) Technology - an Overview. Defence Technol. 2018, 14(1), 28–44. DOI: 10.1016/j.dt.2017.08.002.
- Rugheimer, U. Audi Press Release. http://www.audiusanews.com/newsrelease ( accessed October 25, 2009).
- Chen, C. M.; Kovacevic, R. Joining of Al 6061 Alloy to AISI 1018 Steel by Combined Effects of Fusion and Solid State Welding. Int. J. Mach. Tools Manuf. 2004, 44(11), 1205–1214. DOI: 10.1016/j.ijmachtools.2004.03.011.
- Sravanthi, S. S.; Acharyya, S. G.; Phani Prabhakar, K. V.; Joardar, J. Effect of Varying Weld Speed on Corrosion Resistance and Mechanical Behavior of Aluminium - Steel Welds Fabricated by Cold Metal Transfer Technique. Mater. Manuf. Processes. 2019, 34(14), 1627–1637. DOI: 10.1080/10426914.2019.1605180.
- Cao, R.; Feng, Z.; Chen, J. H. Microstructures and Properties of Titanium–copper Lap Welded Joints by Cold Metal Transfer Technology. Mater. Des. 2014, 53, 192–201. DOI: 10.1016/j.matdes.2013.06.030.
- Sai Sravanthi, S.; Acharyya, S. G. Effect of High-Power Intensity on Corrosion Behaviour of Aluminium—Steel Dissimilar Joints Made by Electron Beam Welding. In Recent Trends in Mechanical Engineering; Springer, Singapore: Lecture Notes in Mechanical Engineering, 2020; pp 227–237. 10.1007/978-981-15-1124-0_20.
- Yang, M.; Lu, J.; Chen, J.; Li, Y.; Liu, Y.; Yang, H. Effect of Welding Speed on Microstructure and Corrosion Resistance of Al–Li Alloy Weld Joint. Mater. Corros. 2019, 71(2), 300–308. DOI: 10.1002/maco.201911068.
- Andreatta, F.; Bellezze, T.; Lanzutti, A.; Roventi, G.; Fedrizzi, L. Galvanic Corrosion of the Seam Weld in Zn–Al Coated Steel Pipes Manufactured by Electric Resistance Welding. Mater. Corros. 2017, 68(3), 368–375. DOI: 10.1002/maco.201609030.
- Wang, S.; Luo, K.; Sun, T.; Li, G.; Cui, G. Corrosion Behavior and Failure Mechanism of Electromagnetic Pulse Welded Joints between Galvanized Steel and Aluminum Alloy Sheets. J. Manuf. Processes. 2021, 64, 937–947. DOI: 10.1016/j.jmapro.2021.02.039.
- Wang, H.; Feng, B.; Song, G.; Liu, L. Laser–arc Hybrid Welding of High-strength Steel and Aluminum Alloy Joints with Brass Filler. Mater. Manuf. Processes. 2018, 33(7), 735–742. DOI: 10.1080/10426914.2017.1364762.
- Shi, H.; Qiao, S.; Qiu, R.; Zhang, X.; Yu, H. Effect of Welding Time on the Joining Phenomena of Diffusion Welded Joint between Aluminum Alloy and Stainless Steel. Mater. Manuf. Processes. 2012, 27(12), 1366–1369. DOI: 10.1080/10426914.2012.663122.
- Rajesh, N.; Jesudoss, H.; Nagaraj, P.; Angela Jennifa, S. J. Investigation on Joining of Aluminum and Mild Steel by Friction Stud Welding. Mater. Manuf. Processes. 2012, 27(12), 1409–1413. DOI: 10.1080/10426914.2012.667894.
- Ding, J. J.; Huang, H. J.; Peyre, P.; Fabbro, R. Temperature Criterion of Laser Welding for Joining Aluminum Alloy with Low-Carbon Steel. Mater. Manuf. Processes. 2006, 21(1), 59–61. DOI: 10.1080/AMP-200060614.
- Xu, T.; Zhou, S.; Wu, H.; Ma, X.; Liu, H.; Li, M. Dissimilar Joining of Low-carbon Steel to Aluminum Alloy with TiC Particles Added in a Zero-gap Lap Joint Configuration by Laser Welding. Mater. Charact. 2021, 182, 111574. DOI: 10.1016/j.matchar.2021.111574.
- Wang, H.; Han, R.; Zhang, Z.; Zhu, M.; Liu, L. Riveting–welding Hybrid Bonding of High-strength Steel and Aluminum Alloy. Mater. Manuf. Processes. 2019, 34(15), 1671–1680. DOI: 10.1080/10426914.2019.1683574.
- Amaninia, H.; Meysami, A.; Foroughifar, A. Investigation of RSW Process on Three-layer Joining of Steel to 6061-T8 Aluminum. Mater. Manuf. Processes. 2019, 34(15), 1681–1688. DOI: 10.1080/10426914.2019.1686519.
- Shah, L. H.; Ishak, M. Review of Research Progress on Aluminum–Steel Dissimilar Welding. Mater. Manuf. Processes. 2014, 29(8), 928–933. DOI: 10.1080/10426914.2014.880461.
- Selvamani, S. T. Microstructure and Stress Corrosion Behaviour of CMT Welded AA6061 T-6 Aluminium Alloy Joints. J. Mater. Res. Technol. 2021, 15, 315–326. DOI: 10.1016/j.jmrt.2021.08.005.
- ASTM International. Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminium Alloys by Mass Loss after Exposure to Nitric Acid (NAMLT Test), G 67–04; Ohio, United States: ASTM, 2004. 10.1520/G0067-04.
- Savguira, Y.; Liu, W. H.; North, T. H.; Thorpe, S. J. Effect of Welding Flash on the Corrosion of Friction Stir Spot Welded AZ31B. Mater. Corros. 2017, 68(4), 423–435. DOI: 10.1002/maco.201609182.
- Yagati, K. P.; Ravi, B.; Joardar, J.; Phaniprabhakar, K. V.; Padmanabham, G. Al–Steel Joining by CMT Weld Brazing: Effect of Filler Wire Composition and Pulsing on the Interface and Mechanical Properties. Trans. Indian Inst. Met. 2019, 72(10), 2763–2772. DOI: 10.1007/s12666-019-01753-6.
- Jácome, L. A.; Weber, S.; Leitner, A.; Arenholz, E.; Bruckner, J.; Hackl, H.; Pyzalla, A. R. Influence of Filler Composition on the Microstructure and Mechanical Properties of Steel-Aluminum Joints Produced by Metal Arc Joining. Adv. Eng. Mater. 2009, 11(5), 350–358. DOI: 10.1002/adem.200800319.
- Movahedi, M.; Kokabi, A. H.; Reihani, S. M. S.; Najafi, H. Effect of Tool Travel and Rotation Speeds on Weld Zone Defects and Joint Strength of Aluminium Steel Lap Joints Made by Friction Stir Welding. Sci. Technol. Weld. Joining. 2012, 17(2), 162–167. DOI: 10.1179/1362171811Y.0000000092.
- Bozzi, S.; Helbert-Etter, A. L.; Baudin, T.; Criqui, B.; Kerbiguet, J. G. Intermetallic Compounds in Al 6016/IF-steel Friction Stir Spot Welds. Mater. Sci. Eng. A. 2010, 527(16–17), 4505–4509. DOI: 10.1016/j.msea.2010.03.097.
- Padmanabhan, R.; Oliveira, M. C.; Menezes, L. F. Deep Drawing of Aluminium-steel Tailor-welded Blanks. Mater. Des. 2008, 29(1), 154–160. DOI: 10.1016/j.matdes.2006.11.007.
- Xu, R. X.; Wei, Z. C.; Li, F. S. Effect of Zn Coating and Al–Zn Coating on Al/Steel Joints by Vacuum Electron Beam Welding. Trans. Indian Inst. Met. 2019, 72(9), 2381–2394. DOI:10.1007/s12666-019-01691-3.
- Basak, S.; Das, H.; Pal, T. K.; Shome, M. Characterization of Intermetallics in Aluminum to Zinc Coated Interstitial Free Steel Joining by Pulsed MIG Brazing for Automotive Application. Mater. Charact. 2016, 112, 229–237. DOI: 10.1016/j.matchar.2015.12.030.
- Dharmendra, C.; Rao, K. P.; Wilden, J.; Reich, S. Study on Laser Welding–brazing of Zinc Coated Steel to Aluminum Alloy with a Zinc Based Filler. Mater. Sci. Eng. A. 2011, 528(3), 1497–1503. DOI: 10.1016/j.msea.2010.10.050.
- Girard, M.; Huneau, B.; Genevois, C.; Sauvage, X.; Racineux, G. Friction Stir Diffusion Bonding of Dissimilar Metals. Sci. Technol. Weld. Joining. 2013, 15(8), 661–665. DOI: 10.1179/136217110X12720264008475.
- Qin, G. L.; Su, Y. H.; Wang, S. J. Microstructures and Properties of Welded Joint of Aluminum Alloy to Galvanized Steel by Nd: YAGlaser + MIG Arc Hybrid Brazing-fusion Welding. Trans. Nonferrous Met. Soc. China. 2014, 24(4), 989–995. DOI: 10.1016/S1003-6326(14)63153-8.
- Zhang, Y.; Guo, G.; Li, F.; Wang, G.; Wei, H. The Interface Control of Butt Joints in Laser Braze Welding of Aluminium-steel with Coaxial Powder Feeding. J. Mater. Process. Technol. 2017, 246, 313–320. DOI: 10.1016/j.jmatprotec.2017.03.020.
- Madhavan, S.; Kamaraj, M.; Vijayaraghavan, L.; Srinivasa Rao, K. Microstructure and Mechanical Properties of Aluminium/steel Dissimilar Weldments: Effect of Heat Input. Mater. Sci. Technol. 2017, 33(2), 200–209. DOI: 10.1080/02670836.2016.1176716.
- Shi, Y.; Li, J.; Zhang, G.; Huang, J.; Gu, Y. Corrosion Behavior of Aluminum-Steel Weld-Brazing Joint. J. Mater. Eng. Perform. 2016, 25(5), 1916–1923. DOI: 10.1007/s11665-016-2020-9.