Process parameter analysis of deep cryogenic treated EN 52 Silicon chromium valve steel through Taguchi technique

References

• Molinari, A.; Pellizzari, M.; Gialanella, S.; Straffelini, G.; Stiasny, K. H. Effect of Deep Cryogenic Treatment on the Mechanical Properties of Tool Steels. J. Mater. Process. Technol. 2001, 118, 350–355. DOI: 10.1016/S0924-0136(01)00973-6.
   Web of Science ®Google Scholar
• Jaswin, M. A.; Lal, D. M. Effect of Cryogenic Treatment on the Tensile Behaviour of En 52 and 21-4N Valve Steels at Room and Elevated Temperatures. Mater. Des. 2011, 32, 2429–2437. DOI: 10.1016/j.matdes.2010.11.065.
   Web of Science ®Google Scholar
• Zhang, F.; Yang, Y.; Shan, Q.; Li, Z.; Bi, J.; Zhou, R. Microstructure Evolution and Mechanical Properties of 0.4C-Si-Mn-Cr Steel During High Temperature Deformation. Mate. (Basel). 2020, 13. DOI: 10.3390/ma13010172.
   Google Scholar
• Jaswin, A.; Lal, D. M. Comprehensive Analysis on the Effect of Deep Cryogenic Treatment on the Mechanical Behaviour of Martensitic Valve Steel. Iran. J. Mater. Sci. Eng. 2018, 15, 9–16.
   Google Scholar
• Vimal, A. J.; Bensely, A.; Lal, D. M.; Srinivasan, K. Deep Cryogenic Treatment Improves Wear Resistance of En 31 Steel. Mater. Manuf. Process. 2008, 23, 369–376. DOI: 10.1080/10426910801938098.
   Web of Science ®Google Scholar
• Senthilkumar, D. Effect of Deep Cryogenic Treatment on Residual Stress and Mechanical Behaviour of Induction Hardened En 8 Steel. Adv. Mater. Process. Technol. 2016, 2, 427–436. DOI: 10.1080/2374068X.2016.1244326.
   Google Scholar
• Senthilkumar, D.; Rajendran, I. Influence of Shallow and Deep Cryogenic Treatment on Tribological Behavior of En 19 Steel. J. Iron Steel Res. Int. 2011, 18(9), 53–59. DOI: 10.1016/S1006-706X(12)60034-X.
   Web of Science ®Google Scholar
• Harish, S.; Bensely, A.; Mohan Lal, D.; Rajadurai, A.; Lenkey, G. B. Microstructural Study of Cryogenically Treated En 31 Bearing Steel. J. Mater. Process. Technol. 2009, 209(7), 3351–3357. DOI: 10.1016/j.jmatprotec.2008.07.046.
   Web of Science ®Google Scholar
• Jaswin, M. A.; Lal, D. M.; Rajadurai, A. Effect of Cryogenic Treatment on the Microstructure and Wear Resistance of X45cr9si3 and X53cr22mn9ni4n Valve Steels. Tribol. Trans. 2011, 54(3), 341–350. DOI: 10.1080/10402004.2010.546033.
   Web of Science ®Google Scholar
• El Mehtedi, M.; Ricci, P.; Drudi, L.; El Mohtadi, S.; Cabibbo, M.; Spigarelli, S. Analysis of the Effect of Deep Cryogenic Treatment on the Hardness and Microstructure of X30 CrMon 15 1 Steel. Mater. Des. 2012, 33, 136–144. DOI: 10.1016/j.matdes.2011.07.030.
   Web of Science ®Google Scholar
• Ozden, R. C.; Anik, M. Enhancement of the Mechanical Properties of En52crmov4 Spring Steel by Deep Cryogenic Treatment. Materwiss. Werksttech. 2020, 51(4), 422–431. DOI: 10.1002/mawe.201900122.
   Web of Science ®Google Scholar
• Razavykia, A.; Delprete, C.; Baldissera, P. Correlation Between Microstructural Alteration, Mechanical Properties and Manufacturability After Cryogenic Treatment: A Review. Mate. (Basel). 2019, 12. DOI: 10.3390/ma12203302.
   Google Scholar
• Arockia Jaswin, M.; Mohan Lal, D. Optimization of the Cryogenic Treatment Process for En 52 Valve Steel Using the Grey-Taguchi Method. Mater. Manuf. Process. 2010, 25(8), 842–850. DOI: 10.1080/10426910903536766.
   Web of Science ®Google Scholar
• Sri Siva, R.; Mohan Lal, D.; Arockia Jaswin, M. Optimization of Deep Cryogenic Treatment Process for 100cr6 Bearing Steel Using the Grey-Taguchi Method. Tribol. Trans. 2012, 55(6), 854–862. DOI: 10.1080/10402004.2012.720002.
   Web of Science ®Google Scholar
• Prabhakaran, M.; Madan, D.; Sivakandhan, C.; Anandan, K.; Marichamy, S. Parametric Effect and Taguchi Optimization of Cryogenic Treatment of OHNS Steel. Mater. Today Proc. 2020, 45, 1979–1982. DOI: 10.1016/j.matpr.2020.09.269.
   Google Scholar
• Kumar, S.; Nagraj, M.; Bongale, A.; Khedkar, N. Deep Cryogenic Treatment of AISI M2 Tool Steel and Optimisation of Its Wear Characteristics Using Taguchi‘s Approach. Arab. J. Sci. Eng. 2018, 43(9), 4917–4929. DOI: 10.1007/s13369-018-3242-Y.
   Web of Science ®Google Scholar
• Siddiquee, A. N.; Khan, Z. A.; Mallick, Z. Grey Relational Analysis Coupled with Principal Component Analysis for Optimisation Design of the Process Parameters in In-Feed Centreless Cylindrical Grinding. Int. J. Adv. Manuf. Technol. 2010, 46(9–12), 983–992. DOI: 10.1007/s00170-009-2159-8.
   Web of Science ®Google Scholar
• Senthilkumar, D.; Rajendran, I. Optimization of Deep Cryogenic Treatment to Reduce Wear Loss of 4140 Steel. Mater. Manuf. Process. 2012, 27(5), 567–572. DOI: 10.1080/10426914.2011.593237.
   Web of Science ®Google Scholar
• Akincioglu, S.; Gokkaya, H.; Akincioglu, G.; Karatas, M. A. Taguchi Optimization of Surface Roughness in the Turning of Hastelloy C22 Super Alloy Using Cryogenically Treated Ceramic Inserts. Proceedings of the Institution of Mechanical Engineers, Part C: J. of Mech. Engg. Sci. 2020, 234(19), 3826–3836. DOI: 10.1177/0954406220917708.
   Web of Science ®Google Scholar
• Kumar, S. V.; Kumar, M. P. Optimization of Cryogenic Cooled EDM Process Parameters Using Grey Relational Analysis. J. Mech. Sci. Technol. 2014, 28(9), 3777–3784. DOI: 10.1007/s12206-014-0840-9.
   Web of Science ®Google Scholar