References
- Vilches, F. J. T.; Hurtado, L. S.; Fernández, F. M.; Gamboa, C. B. Analysis of the Chip Geometry in Dry Machining of Aeronautical Aluminum Alloys. Appl. Sci. 2017, 7(2), 132. DOI: 10.3390/app7020132.
- Akhtar, M.; Qamar, S. Z.; Muhammad, M.; Nadeem, A. Optimum Heat Treatment of Aluminum Alloy Used in Manufacturing of Automotive Piston Components. Mater. Manuf. Process 2018, 33(16), 1874–1880. DOI: 10.1080/10426914.2018.1512128.
- Gao, H.; Ma, B.; Singh, R. P.; Yang, H. Areal Surface Roughness of AZ31B Magnesium Alloy Processed by Dry Face Turning: An Experimental Framework Combined with Regression Analysis. Materials 2020, 13(10), 2303. DOI: 10.3390/ma13102303.
- Santos, M. C.; Machado, A. R.; Sales, W. F.; Barrozo, M. A. S.; Ezugwu, E. O. Machining of Aluminum Alloys: A Review. Int. J. Adv. Manuf. Technol. 2016, 86(9–12), 3067–3080. DOI: 10.1007/s00170-016-8431-9.
- Jebaraj, M.; Kumar, M. P. Effect of Cryogenic Co2 and Ln2 Coolants in Milling of Aluminum Alloy. Mater. Manuf. Process 2019, 34(5), 511–520. DOI: 10.1080/10426914.2018.1532591.
- Sastry, C. C.; Hariharan, P.; Kumar, M. P. Experimental Investigation of Dry, Wet and Cryogenic Boring of AA 7075 Alloy. Mater. Manuf. Process 2019, 34(7), 814–831. DOI: 10.1080/10426914.2019.1605174.
- Kannan, C.; Ramanujam, R.; Balan, A. S. S. Machinability Studies on Al 7075/bn/al2o3 Squeeze Cast Hybrid Nanocomposite Under Different Machining Environments. Mater. Manuf. Process 2018, 33(5), 587–595. DOI: 10.1080/10426914.2017.1401718.
- Khani, S.; Razfar, M. R.; Haghighi, S. S.; Farahnakian, M. Optimization of Microtextured Tools Parameters in Thread Turning Process of Aluminum 7075 Aerospace Alloy. Mater. Manuf. Process 2020, 35(12), 1330–1338. DOI: 10.1080/10426914.2020.1772485.
- Sharma, V.; Pandey, P. M. Recent Advances in Ultrasonic Assisted Turning: A Step Towards Sustainability. Cogent Eng. 2016, 3(1), 1222776. DOI: 10.1080/23311916.2016.1222776.
- Deswal, N.; Kant, R. Experimental Investigation on Magnesium AZ31B Alloy During Ultrasonic Vibration Assisted Turning Process. Mater. Manuf. Process 2022, 1–7. DOI: 10.1080/10426914.2022.2039701.
- Dixit, U. S.; Pandey, P. M.; Verma, G. C. Ultrasonic-Assisted Machining Processes : A Review. Int. J. Mechatron. Manuf. Syst. 2019, 12(3/4), 227–254.
- Sonia, P.; Jain, J. K.; Saxena, K. K. Influence of Ultrasonic Vibration Assistance in Manufacturing Processes : A Review. Mater. Manuf. Process. 2021, 36(13), 1451–1475. DOI: 10.1080/10426914.2021.1914843.
- Zhou, M.; Eow, Y. T.; Ngoi, B. K. A.; Lim, E. N. Vibration-Assisted Precision Machining of Steel with PCD Tools. Mater. Manuf. Process. 2003, 18(5), 825–834. DOI: 10.1081/AMP-120024978.
- Zou, P.; Xu, Y.; He, Y.; Chen, M.; Wu, H. Experimental Investigation of Ultrasonic Vibration Assisted Turning of 304 Austenitic Stainless Steel. Shock Vib. 2015, 2015, 19.
- Lotfi, M.; Amini, S. Effect of Ultrasonic Vibration on Frictional Behavior of Tool–chip Interface: Finite Element Analysis and Experimental Study. Proc. Inst. Mech. Eng. B 2018, 232(7), 1212–1220. DOI: 10.1177/0954405416666895.
- Bai, W.; Roy, A.; Sun, R.; Silberschmidt, V. V. Enhanced Machinability of SiC-Reinforced Metal-Matrix Composite with Hybrid Turning. J. Mater. Process. Technol. 2019, 268, 149–161. DOI: 10.1016/j.jmatprotec.2019.01.017.
- Bayat, M.; Amini, S.; Hadidi, M. Effect of Ultrasonic-Assisted Turning on Geometrical Tolerances in Al 2024-T6. Mater. Manuf. Process 2021, 36(16), 1875–1886. DOI: 10.1080/10426914.2021.1926496.
- Muhammad, R.; Ahmed, N.; Ullah, H.; Roy, A.; Silberschmidt, V. V. Hybrid Machining Process: Experimental and Numerical Analysis of Hot Ultrasonically Assisted Turning. Int. J. Adv. Manuf. Technol. 2018, 97(5–8), 2173–2192. DOI: 10.1007/s00170-018-2087-6.
- Sofuoğlu, M. A.; Çakır, F. H.; Gürgen, S.; Orak, S.; Kuşhan, M. C. Experimental Investigation of Machining Characteristics and Chatter Stability for Hastelloy-X with Ultrasonic and Hot Turning. Int. J. Adv. Manuf. Technol. 2018, 95(1–4), 83–97. DOI: 10.1007/s00170-017-1153-9.
- Ebrahimi, S. M.; Hadad, M.; Araee, A. Sustainable Machining of Hardened AISI630 Stainless Steel Using Thermally Enhanced Turning Technique. Mach. Sci. Technol. 2021, 25(4), 608–636. DOI: 10.1080/10910344.2021.1903922.
- Kalantari, O.; Fallah, M. M.; Jafarian, F.; Hamzeloo, S. R. Surface Integrity in Laser-Assisted Machining of Ti6al4v. Proc. Inst. Mech. Eng. Part C 2021, 235(20), 5009–5016. DOI: 10.1177/0954406220978255.
- Deswal, N.; Kant, R. Machinability Analysis During Laser Assisted Turning of Aluminium 3003 Alloy. Lasers Manuf. Mater. Process 2022, 9(1), 56–71. DOI: 10.1007/s40516-022-00163-9.
- Kaselouris, E.; Baroutsos, A.; Papadoulis, T.; Papadogiannis, N. A.; Tatarakis, M.; Dimitriou, V. A Study on the Influence of Laser Parameters on Laser-Assisted Machining of Aisi H-13 Steel. Key Eng. Mater. 2020, 827, 92–97. DOI: 10.4028/KEM.827.92www.scientific.net/KEM.827.92.
- Khajehzadeh, M.; Razfar, M. R. Process Parameters Influence on Laser-Assisted Machining-Induced Residual Stresses. Mater. Manuf. Process 2020, 35(15), 1680–1689. DOI: 10.1080/10426914.2020.1784930.
- Rozzi, J. C.; Pfefferkorn, F. E.; Shin, Y. C.; Incropera, F. P. Experimental Evaluation of the Laser Assisted Machining of Silicon Nitride Ceramics. J. Manuf. Sci. Eng. Trans. ASME 2000, 122(4), 666–670. DOI:10.1115/1.1286556.
- Sun, S.; Harris, J.; Brandt, M. Parametric Investigation of Laser-Assisted Machining of Commercially Pure Titanium. Adv. Eng. Mater. 2008, 10(6), 565–572. DOI: 10.1002/adem.200700349.
- Venkatesan, K.; Ramanujam, R. Improvement of Machinability Using Laser-Aided Hybrid Machining for Inconel 718 Alloy. Mater. Manuf. Process 2016, 31(14), 1825–1835. DOI: 10.1080/10426914.2015.1117626.
- Tadavani, S. A.; Razavi, R. S.; Vafaei, R. Pulsed Laser-Assisted Machining of Inconel 718 Superalloy. Opt. Laser Technol. 2017, 87, 72–78. DOI: 10.1016/j.optlastec.2016.07.020.
- Wei, C.; Guo, W.; Pratomo, E. S.; Li, Q.; Wang, D.; Whitehead, D.; Li, L. High Speed, High Power Density Laser-Assisted Machining of Al-SiC Metal Matrix Composite with Significant Increase in Productivity and Surface Quality. J. Mater. Process. Technol. 2020, 285, 116784. DOI: 10.1016/j.jmatprotec.2020.116784.
- Kant, R.; Joshi, S. N. Numerical and Experimental Studies on the Laser Bending of Magnesium M1A Alloy. Lasers Eng. 2016, 35(1–4), 39–62.